Insight into the adsorption of tetracycline onto amino and amino–Fe functionalized mesoporous silica: Effect of functionalized groups

In order to study the influences of functionalized groups onto the adsorption of tetracycline (TC), we prepared a series of amino and amino–Fe^3 + complex mesoporous silica adsorbents with diverse content of amino and Fe^3 + groups (named N,N-SBA15 and Fe-N,N-SBA15). The resulting mesoporous silica adsorbents were fully characterized by X-ray powder diffraction, Fourier transform infrared spectrometer and N₂ adsorption/desorption isotherms. Furthermore, the effects of functionalized groups on the removal of TC were investigated. The results showed that the periodic ordered structure of SBA-15 was maintained after modification of amino/Fe^3 + groups. The functionalized amino groups decreased the adsorption capacity while the coordinated Fe^3 + increased the adsorption capacity. The adsorption kinetics of TC fitted pseudo-second-order model well and the equilibrium was achieved quickly. The adsorption isotherms fitted the Langmuir model well and with the Fe^3 + content increased from 3.93% to 8.26%, the Q_max of the adsorbents increased from 102 to 188 mmol/kg. The solution pH affected the adsorption of TC onto amino complex adsorbents slightly while influenced the adsorption onto Fe-amine complex adsorbents greatly. The adsorption of TC on SBA15 and N,N-SBA15 may be related to the formation of outer-sphere surface complexes, while the adsorption of TC onto Fe-N,N-SBA15 was mainly attributed to the inner-sphere surface complexes. This study could offer potential materials that have excellent adsorption behavior for environmental remediation and suggested useful information for the preparing other adsorbents in environmental applications.     

利用废旧电子元件粉末/PVC制备复合材料

利用电子废弃物中非金属材料/聚氯乙烯(PVC)制备复合材料,考察了流变仪温度、转速.液压机压力、温度、废旧电子元件目数等对复合材料力学性能的影响.结果表明,废旧电子元件粉末添加量为70%时,目数为120目,流变仪加工温度为205 ℃,转速为45 r/min,液压机液压温度为185 ℃,压力为15 MPa时,制得复合材料...     

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

The graft copolymerization of the starch and acrylic were used to prepare the superabsorbent, and the high oil-absorbing resin was also studied preliminarily. In addition, following the method of the emulsion polymerization, the cerium nitrate amine was regarded as the initiator, the acrylic amide and the methyl methacrylate functioned as the monomer. There are several significant parameters taken into consideration such as the factors that influence the performance of the superabsorbent and the high oil-absorbing resin, the dosage of the initiator amount, the ratio of the starch and the monomer and the dosage of crosslinking agent.     

间硝基酚在超高交联树脂上的吸附性能

研究了5种吸附树脂(NDA-88、NDA-99、NDA-150、AM-1和XAD-4)对间硝基酚的静态吸附行为.结果表明,3种超高交联树脂(NDA-88、NDA-99和NDA-150)对间硝基酚的吸附效果都比较好.并研究了NDA-88树脂对间硝基酚的饱和吸附和脱附行为.结果显示,NDA-88树脂对间硝基酚的饱和吸附量为3.5 mmol/g,该树脂吸附间硝基酚后容易洗脱,用乙醇:2 mol/LNaOH(体积比1:1)作脱附剂,温度328 K,脱附剂用量为3 BV(床体积)时,脱附率约96%.用NDA-88树脂处理含硝基酚废水,废水的处理量为40 BV时,COD平均去除率约91%,树脂吸附性能良好.     

腐殖酸树脂处理含Pb2+、CU2+、Ni2+废水的研究

利用泥炭为原料制备腐殖酸树脂.在动态条件下,研究了腐殖酸树脂对重金属离子Pb2+、Cu2+和Ni2+的吸附效果及吸附条件.同时探讨了腐殖酸树脂对重金属离子Pb2+、Cu2+和Ni2+的吸附与解吸再生机理,吸附机理研究表明,腐殖酸树脂对重金属离子Pb2+、Cu2+和Ni2+的主要吸附形式为离子交换吸附和络合吸附.结果表明,在废水pH值为5.0～7.0,Pb2+、Cu2+和Ni2+浓度分别为50 mg/L,经腐殖酸树脂处理,Pb2+、Cu2+和Ni2+去除率可达98%以上,且处理后废水近中性.含Pb2+、Cu2+和Ni2+电镀废水经腐殖酸树脂处理后,废水中Pb2+、Cu2+和Ni2+含量显著低于国家排放标准.     

盐液浸提辅助微波再生废油脱水树脂及机制分析

对用于废油脱水的聚丙烯酸钠树脂在盐液浸提辅助微波脱附再生过程中的脱附特性和再生使用性能进行了研究。实验结果表明,盐液浸提辅助微波处理的脱附速率是普通热处理的5～6倍,且能耗更低,脱附率更高,树脂床层温升速率更快,温度峰值却更低,说明盐液浸提对微波处理具有明显辅助效果;树脂再生性能测试结果表明,盐液浸提辅助微波处理的树脂再生使用性能最好,孔结构破坏更少。分析认为,微波选择加热特性以及盐液浸提导致树脂内外渗透压降低和方向改变是盐液浸提辅助微波处理具有良好脱附效果的关键机制。     

树脂吸附法处理对氨基苯酚废水

采用自制的NDA-99特种复合功能树脂处理对氨基苯酚（PAP）生产废水,考察了各种因素对吸附和脱附效果的影响。小试实验结果得出的工艺条件为：吸附流量2．0BV／h,吸附温度15℃,单柱吸附量10BV;脱附剂为2BV盐酸（质量分数1．5％）＋2BV水。中试试验结果表明,在上述工艺条件下,NDA-99树脂处理PAP废水的吸附性能和脱附性能稳定,平均COD去除率约为93％,平均PAP脱附率达98％。     

气相色谱法测定地下水中氯化苄

建立了气相色谱法测定地下水中氯化苄的方法。选用ＧＤＸ５０２大孔树脂或Ｃ１８小预处理柱吸附浓缩地下水中氯化苄,用苯洗脱,洗脱液注入色谱仪进行分析。方法回收率为８６４９８１％,变异系数＜８％。     

静态离子交换原子吸收法测定环境水样中的铬(Ⅵ)和总铬

本文提出了用苯乙烯强碱型阴离子交换树脂对环境水样中Ｃｒ（Ⅵ）交换吸附后,与基体分离,用ＮａＨＳＯ３进行还原洗脱,火焰原子吸收法测定洗脱液中Ｃｒ（Ⅵ）的方法,同时研究了在强氧化剂过硫酸铵存在下,用上法测定环境水样中总铬的条件。结果表明,该法简单快速,能达到一次分离阴、阳离子干扰和富集微量的铬,灵敏度为０．０３６μｇ／ｍｌ１％吸收,相对标准偏差２．８％,回收率９８～１０３％。