Uncertainties in a risk management context in early phases of offshore petroleum field development

The current risk management approach for the Norwegian offshore petroleum industry came into effect in 2001 and has been stable with minor changes for 15 years. Relatively few new installations were slated for development until quite recently, and several new projects have been started in the last few years. The paper considers the risk management approach in the pre-FEED phase and builds on two case studies selected from the most recent cases. These case studies have been evaluated with respect to how uncertainties are considered in the early phase, based on the submission of the Plan for Development and Operation, their evaluations by authorities and the supporting documents. Both case studies involve new concepts for which there is no experience from similar environments and/or water depths. In spite of what could have been expected, the case studies conclude that uncertainties have not been in focus at all during concept development. This appears to be definitely the case for the licensees, but also to be the case for the authorities. Some suggestions are presented for what could have been considered by the licensees and authorities.     

Optimizing the design of storage facilities through the application of ISD and QRA

Four strategies can be used to achieve safety in chemical processes: inherent, passive, active and procedural. However, the strategy that offers the best results is the inherent safety approach, especially if it is applied during the initial stages of a project. Inherently Safer Design (ISD) permanently eliminates or reduces hazards, and thus avoids or diminishes the consequences of incidents. ISD can be applied using four strategies: substitution, minimization, moderation and simplification. In this paper, we propose a methodology that combines ISD strategies with Quantitative Risk Assessment (QRA) to optimize the design of storage installations. As 17% of major accidents in the chemical industry occur during the storage process and cause significant losses, it is essential to improve safety in such installations. The proposed method applies QRA to estimate the risk associated with a specific design. The design can then be compared to others to determine which is inherently safer. The risk analysis may incorporate complex phenomena such as the domino effect and possible impacts on vulnerable material and human elements. The methodology was applied to the San Juanico tragedy that occurred in Mexico in 1984.     

韶钢外委项目安全管理措施

随着企业用工制度的改革和深化,多层次、多方位、多形式的用工体系已经形成,给企业固有的安全管理网络体系形成了较大的冲击,特别是《安全生产法》的全面实施,给企业的安全管理工作赋予了更多的内容。针对韶钢外委项日实际情况,论述了外委项目安全管理的措施。     

不锈钢管制造业废水处理的工程实践

对不锈钢管业生产过程产生的废水采用中和、絮凝方法进行处理。出水可以达到国家污水综合排放标准（GB8978—1996）新建一级标准。利用该工艺处理废水的特点是工艺简单、投资省、占地小、操作简单、运行稳定、处理效果好。     

建筑钢结构中钢构件的防火性能与抗火设计研究

首先有针对性地对当前国内外建筑钢结构中钢构件的防火性能与抗火设计研究背景做了较系统分析,接着,通过有限元程序,对当前应用非常广泛的半刚接门式刚架建筑在火灾高温下的受力性能进行了整体结构非线性分析。计算结果表明：随着温度的升高,钢构件节点的刚度不断下降,当节点的刚度下降到不能约束与其连接的梁柱构件时,结构将发生突然坍塌性...     

危险废物回转窑焚烧系统的工艺设计

介绍杭州市危险废物回转窑焚烧处理示范工程的一期规模、工艺流程及主要设备的设计方法。     

国内外钢渣处理技术与综合利用技术的发展分析

介绍了国外钢渣综合利用概况,分析了我国钢渣处理技术与国外之间的差距.对存在的问题提出了建议.     

Network design for water quality monitoring of surface freshwaters: a review

To date, many water quality monitoring networks for surface freshwaters have been rather haphazardly designed without a consistent or logical design strategy. Moreover, design practices in recent years indicate a need for cost-effective and logistically adaptable network design approaches. There are many variables that need to be included in a comprehensive yet practical monitoring network: a holistic appraisal of the monitoring objectives, representative sampling locations, suitable sampling frequencies, water quality variable selection, and budgetary and logistical constraints are examples. In order to investigate the factors which affect the development of an effective water quality monitoring network design methodology, a review of past and current approaches is presented.     

Atmospheric bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of an iron and steel making plant

An IRA-743 resin bulk sampler was validated to monitor long-term bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Six consecutive sampling campaigns (2008-2009) were conducted at four sites around steel complexes in Pohang, South Korea to investigate spatial and seasonal variations of PCDD/F bulk deposition. The bulk deposition within the steel complex showed the highest ∑_4-8PCDD/F (Tetra-Octa) fluxes, ranging from 204 to 608 (mean: 352) pg m⁻² d⁻¹, indicating steel complexes were major sources of PCDD/Fs. The homologue profiles were dominated with lower chlorinated PCDFs. Furthermore, the prevailing winds were confirmed to influence the spatial distribution of PCDD/F deposition. There were apparent seasonal variations of the bulk deposition at each site, and seasonal homologue patterns of PCDD/Fs were clearly observed. According to the passive air sampling, however, no significant seasonal change of ambient air concentrations of PCDD/Fs was observed. Therefore, it was concluded that the seasonal variations of deposition fluxes of PCDD/Fs probably resulted from temperature-dependent gas/particle partitioning.     

深冲钢板塑性变形形为研究

单相塑性材料的强度和塑性基本上是分别研究讨论的。此文以低碳深冲钢板为例,从能量观点出发,讨论了强度和塑性的内在制约关系,唯象地提出了单相塑性材料塑性破坏的判据,并解释了几个实验现象。此文的研究有助于加深对深冲钢塑性变形形为的理解。