Comparative distribution, sourcing, and chemical behavior of PCDD/Fs and PCBs in an estuary environment

PCDD/F and PCB field data (1041 samples) in five media (dissolved, suspended sediment, bed sediment, catfish, and blue crab) were studied to explore dual contaminant patterns in the Houston Ship Channel, Texas, USA. PCDD/Fs showed greater concentration than PCBs in suspended sediments while PCBs were higher in apparent dissolved (truly dissolved + DOC-associated), fish, and crab. PCDD/Fs at nearly all locations contributed more strongly to dioxin-like toxicity. The fraction of PCB TEQ was, however, enriched in biotic over abiotic media due in large part to the presence of PCB 126, which was mostly undetected in water and sediment and yet exhibited a BAF three times greater than 2,3,7,8-TCDD. Dissolved-suspended sediment and suspended-bed sediment relationships showed that (1) observed apparent dissolved concentration differences (as fraction of total water were mean 10% PCDD/Fs and 63% PCBs) can reasonably be explained by a four-phase partition model (truly dissolved, DOC-associated, suspended OC, and suspended BC) for PCBs but not for PCDD/Fs and (2) the contaminants behaved similarly in bed to suspended sediment concentration ratios (C_bed/C_susp) upstream of a major confluence but not downstream. PCA-cluster analysis pointed to the possibility that suspended sediment PCB contamination originates from resuspended bed sediment while PCDD/Fs in suspended sediment originates more probably from other sediment sources such as upstream wash load or air deposition. Finally, examinations of a congener marker ratio (PCB 209/206) seemed to indicate that a source of pure PCB 209 may exist in bed sediment near Patrick Bayou though the source was not completely localized.     

Incomplete aerobic degradation of the antidiabetic drug Metformin and identification of the bacterial dead-end transformation product Guanylurea

Active pharmaceutical ingredients as well as personal care products are detected in increasing prevalence in different environmental compartments such as surface water, groundwater and soil. Still little is known about the environmental fate of these substances. The type II antidiabetic drug Metformin has already been detected in different surface waters worldwide, but concentrations were significantly lower than the corresponding predicted environmental concentration (PEC). In human and mammal metabolism so far no metabolites of Metformin have been identified, so the expected environmental concentrations should be very high.To assess the aerobic biodegradability of Metformin and the possible formation of degradation products, three Organisation of Economic Cooperation and Development (OECD) test series were performed in the present study.In the Closed Bottle test (OECD 301 D), a screening test that simulates the conditions of an environmental surface water compartment, Metformin was classified as not readily biodegradable (no biodegradation). In the Manometric Respiratory test (OEDC 301 F) working with high bacterial density, Metformin was biodegraded in one of three test bottles to 48.7% and in the toxicity control bottle to 57.5%. In the Zahn-Wellens test (OECD 302 B) using activated sludge, Metformin was biodegraded in both test vessels to an extent of 51.3% and 49.9%, respectively.Analysis of test samples by high performance liquid chromatography coupled to multiple stage mass spectrometry (HPLC-MS(n)) showed in the tests vessels were biodegradation was observed full elimination of Metformin and revealed Guanylurea (Amidinourea, Dicyandiamidine) as single and stable aerobic bacterial degradation product. In another Manometric Respiratory test Guanylurea showed no more transformation. Photodegradation of Guanylurea was also negative.A first screening in one of the greatest sewage treatment plant in southern Germany found Metformin with high concentrations (56.8 μg L⁻¹) in the influent (PEC = 79.8 μg L⁻¹), but effluent concentration was much lower (0.76 μg L⁻¹) whereas Guanylurea was detected in a low influent and high effluent concentration (1.86 μg L⁻¹). These data support the experimental findings in the OECD tests and analytical results of other studies, that Metformin under aerobic conditions can bacterially be degraded to the stable dead-end transformation product Guanylurea.     

Spray atomization and deposition patterns of one newtonian and two pseudoplastic formulations after aerial application over a mature conifer forest in Newfoundland

Abstract

Spray atomization and deposition patterns of three formulations were investigated in five aerial spray trials in Newfoundland, to understand the inter‐relationships between physical properties, drop size spectra and recovery of the spray volume at ground level. Diflubenzuron (DFB) was sprayed at 30 g active ingredient in 2.0 L/ha. Futura XLV (Fu‐XLV) and Thuricide® 48LV (Thu‐48LV), spray formulations of Bacillus thuringiensis (B.t.), were both applied undiluted at 30 BIU/ha, but in volume rates of 2.1 L/ha and 2.36 L/ha respectively. Each of the three formulations was applied over a 15 ha plot using a Piper Pawnee aircraft fitted with six Micronair® AU5000 atomizers. Spray drops were sampled with Kromekote® cards and deposits were collected on glass plates. Physical properties measured were: viscosity at variable shear rates, volatility and surface tension. The viscosities increased progressively from low (for DFB), moderate (for Thu‐48LV) to high (for Fu‐XLV) values, showing a gradual increase in pseudoplastic behaviour of the three formulations. The volatility data indicated an inverse relationship to the viscosities, but the surface tensions were similar for all the formulations.

The highly pseudoplastic Fu‐XLV atomized into the least wide drop size spectrum. The Newtonian formulation of DFB, on the other hand, atomized into the widest drop spectrum; and the moderately pseudoplastic Thu‐48LV, into an intermediate drop spectrum. Thus viscosity and volatility were more important factors in liquid atomization and drop deposition, than surface tension. Among the three meteorological factors measured, relative humidity appeared more important in drop deposition than did wind speed and temperature, within the range measured.     

The role of personal experience in frequency of rainwater tank maintenance and policy implications

Domestic rainwater tanks have a long history in Australia, although more recently they have been common only in remote and rural areas. However, in some urban areas, recent drought conditions have led to the promotion of rainwater tanks to supplement domestic water supplies. Evidence suggests that water tank maintenance may be insufficient in many cases, leading to problems with water quality and the potential spread of vector-borne disease. Drawing on research into the impact of personal experience (i.e. procedural knowledge) relating to pro-environmental behaviour, a survey of urban residents with mandated rainwater tanks (N?=?746) was conducted. The study assessed whether past personal history of living with a tank influenced the frequency of tank maintenance behaviours. Analyses indicated that both childhood and prior adult experience with rainwater tanks were important in predicting adequate tank maintenance behaviour, particularly among males. The results also showed that attitudinal perceptions of water culture did not influence maintenance behaviour, whereas direct past experiences did, suggesting an important role for procedural knowledge. These results are discussed with reference to the promotion of tank maintenance and other pro-environmental behaviours through the development of future environmental policies designed to foster the development of pro-environmental skills to empower citizens.     

Considering the locals: coastal construction and destruction in times of climate change on Anjouan,Comoros

The current discussion of anticipated climate change impacts and future sea level rise is particularly relevant to small island states. An increase in natural hazards, such as floods and storm waves, is likely to have a devastating impact on small islands' coastlines, severely affecting targeted sustainable development. Coastal erosion, notably human‐induced erosion, has been an ongoing threat to small island biodiversity, resources, infrastructure, and settlements, as well as society at large. In the context of climate change, the problem of coastal erosion and the debate surrounding it is gaining momentum. Before attributing associated impacts to climate change, current human activities need to be analysed, focusing not only on geomorphological and climatological aspects, but also on political and traditional cultural frameworks. The objective of this paper is to demonstrate the importance of the social‐political‐ecological systems analysis for adaptation strategies, and thus for future sustainable development. Coastal use is based on human constructs of the coast, as well as local perceptions and values ascribed to the coast. We use the case study of Anjouan, Comoros to differentiate between constructive and destructive practices on the coast, from both a mental and technical perspective. Beach erosion is described as more than a resource problem that manifests itself locally rather than nationally. Divergent political scales of interest impact future development as much as local action. Local action is not least framed by mental contribution and attribution of coasts as places for living, recreation and resource use. The present case study demonstrates that mental constructs of coasts as valuable areas can, in some cases, lead to the protection and preservation of beaches by initiatives of collective action. At the same time, local communities see the negative impacts of sand mining as causes of coastal erosion and, therefore, it is difficult to mobilize them to adapt to climate change and sea level rise.     

Coupling Socioeconomic and Lake Systems for Sustainability: A Conceptual Analysis Using Lake St. Clair Region as a Case Study

Applying sustainability at an operational level requires understanding the linkages between socioeconomic and natural systems. We identified linkages in a case study of the Lake St. Clair (LSC) region, part of the Laurentian Great Lakes system. Our research phases included: (1) investigating and revising existing coupled human and natural systems frameworks to develop a framework for this case study; (2) testing and refining the framework by hosting a 1-day stakeholder workshop and (3) creating a causal loop diagram (CLD) to illustrate the relationships among the systems’ key components. With stakeholder assistance, we identified four interrelated pathways that include water use and discharge, land use, tourism and shipping that impact the ecological condition of LSC. The interrelationships between the pathways of water use and tourism are further illustrated by a CLD with several feedback loops. We suggest that this holistic approach can be applied to other case studies and inspire the development of dynamic models capable of informing decision making for sustainability.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0432-4) contains supplementary material, which is available to authorized users.     

Edible Protein Energy Return on Investment Ratio (ep-EROI) for Spanish Seafood Products

Life cycle assessment (LCA) has developed into a useful methodology to assess energy consumption of fishing fleets and their derived seafood products, as well as the associated environmental burdens. In this study, however, the life cycle inventory data is used to provide a dimensionless ratio between energy inputs and the energy provided by the fish: the edible protein energy return on investment (ep-EROI). The main objective was to perform a critical comparison of seafood products landed in Galicia (NW Spain) in terms of ep-EROI. The combination of energy return on investment (EROI) with LCA, the latter having standardized mechanisms regarding data acquisition and system boundary delimitation, allowed a reduction of uncertainties in EROI estimations. Results allow a deeper understanding of the energy efficiency in the Galician fishing sector, showing that small pelagic species present the highest ep-EROI values if captured using specific fishing techniques. Finally, results are expected to provide useful guidelines for policy support in the EU’s Common Fisheries Policy.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0426-2) contains supplementary material, which is available to authorized users.     

Knowledge-based system,equipped with cluster analysis for eco-material selection: an automobile structure case study

The aim of this study is to develop a material selection framework structured around a knowledge-based system (KBS). Specifically, a hybrid data mining technique is employed to extract knowledge from large datasets using cluster analysis techniques; the mined knowledge then serves as the inference logic within the KBS designed for material selection purposes. Cluster analysis results are used as a basis for the tree-based structure of the KBS where if–then rules are developed based on the general cluster properties; that is, inference logic is structured in a way such that it can predict general sustainability characteristics of the material as well as its exact mechanical, cost and physical properties. To develop the structure of the KBS, the selection structure employs sustainable material indices. Additionally, the proposed material selection model of the KBS is purposefully composed of material sustainability, functionality and cost indices. The constructed knowledge is then demonstrated for selecting automobile structural panels.     

Application of integrated micro sensor in internal measurement of high temperature fuel cell

This study developed an integrated (flow, voltage, and temperature) micro sensor using the micro-electro-mechanical systems (MEMS) technology. It was inserted into the high temperature proton exchange membrane fuel cell (HT-PEMFC) for local real-time measurement. The integrated micro sensor is made of 40 µm thick stainless steel base material, and its protective layer is formed by polyimide (PI) that has better temperature resistance. The integrated micro sensor has three functions, and is favorably characterized by small size, good acid resistance and temperature resistance, quick response, real-time measurement, and being able to be put in any place for measurement. After calibration, and its reliability confirmed, the integrated micro sensor is inserted into the HT-PEMFC for local microcosmic measurement.     

太湖水草监管体系构建初步研究

随着太湖地区的经济发展及湖泊资源的利用,太湖水草的爆发性生长已经成为提高太湖水质、维持生态系统稳定的严重阻碍。水草枯亡后可能会导致水质异常,进而给苏州市饮用水安全带来威胁。依据4年来对太湖主要湖区水草的群落结构、分布范围、季节更替的研究,初步构建了太湖水草监管体系,为政府部门实施系统性监管提供支撑,并在全国湖泊水草监管方面发挥积极的示范作用。