炼油污水处理场技术改造

对广州石化炼油新污水处理场现状进行了分析 ,针对存在问题 ,通过更换原有设备 ,增加新设备对其进行了技术改造 ,大大地提高了外排污水合格率     

论钢铁企业危险废物专项管理制度建设

简要介绍钢铁企业建立并实施危险废物专项管理制度及其重要性,并结合实际对钢铁企业危险废物专项管理建设提出了建议。     

城市垃圾填埋场中废气测定方法

本文介绍了城市垃圾填埋场中的废气用注射器采样．经气相色谱热导池检测器测定的方法．该方法具有简单、快速、成本低、准确性高、精密度好等优点，由本方法测得的城市垃圾填埋场废气中甲烷和二氧化碳含量可作为设计沼气回收利用的可靠依据。     

Test of membrane bioreactor for waste water treatment in a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper describes a membrane-bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99% respectively. The average removal of NH₃-N and total phosphorous was 85% and 82%. A coefficient of COD removal, k, was 0.017-0.080 L/(mg.d). The membrane flux maintained higher than 60 L/hm2 bar for 34 days without chemical cleaning when the velocity of crossflow was 3.5-3.9 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source used to make up water for industrial cooling system or to be reused for other purposes.     

某些剧毒有机废料在高温至超临界水中的处理实验

为了探索毒害有机废料的处理条件和反应机制,用二氨基乙二肟,氨基氰和蜜胺作初始试料,在温度１５０－４００℃,压力１００－７００×１０＾５Ｐａ的条件下进行了水热实验研究,部分密胺实验还添加了Ｈ２Ｏ２,实验结构表明,在水热条件下,尤其在超临界水中,二氨基乙二肟和氨基氰既可以通过热解作用而聚合成较高分子量的氮杂环混合物,进而水解转化成ＣＯ２和ＮＨ３,也可以直接发生水解作用,生成ＣＯ２和ＮＨ３,添加氧化剂可     

危险废物特性比较研究

介绍了中国、美国及欧盟等国家和地区危险废物危险特性的定义及其鉴别指标体系。通过对三者的优缺点比较,分析了我国定义危险特性存在的问题．提出了我国危险废物特性制定建议。     

上海市医疗废物控制系统建设设想

根据上海的实际情况，借鉴国内外先进的医疗废物管理、处置经验，从控制的角度全面阐述了上海市医疗废物控制系统的目标、集中处置系统以及配套系统等各个方面建设的具体设想。     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

建筑废弃物回收再利用项目运作模式刍探

建筑废弃物处理是城市建设中的一大难题,如果实行简单填埋,不仅污染环境、造成资源浪费,而且也耗费政府大量财力。介绍了深圳市龙岗区通过创新招标方式,公开出让特许经营权,引入企业运用先进技术对建筑废弃物实行综合再利用的一些做法,同时对城市建筑废弃物回收再利用如何实现规模化和产业化发展,以及政府在推动循环经济发展方面如何将经济效益与社会效益有机结合提出了一些看法。     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.