基于DMSP/OLS数据的江苏省城镇人口空间分异研究

人口空间分异研究是区域协调发展的基础,便捷准确地获取城镇人口全局和局域的空间信息,对于合理制定区域人口、经济和社会发展政策具有重要意义。在DMSP/OLS(夜间灯光)数据和人口数据之间的定量关联基础上,模拟出格网尺度上江苏省2012年人口密度,采用人口集中指数、空间变差函数识别人口分布的空间格局并探讨区别于行政单元尺度的人口格局形成机理。区域层面,江苏省人口空间分异呈现苏北地区"低密度点状"分布,苏南、苏中为"高密度面状"分布并存格局。城镇层面,江苏省人口空间分布结构具有4种类型,H-H型地区人口各向差异性最强,网格单元内随机变异最小;H-L型人口各向差异性最小,网格单元内随机变异较大;L-L型人口轴向均质化特征明显,网格单元随机变异较小;L-H型空间各向差异性较小,网格单元的随机变异最大。结果表明,基于DMSP/OLS夜间灯光数据反演而得到的人口格网模型具有巨大潜力,结合变差函数进行拟合分析可定量地刻画城镇内部人口分布的空间异质性特征。     

HF对Cu-SSZ-13/堇青石的原位合成及脱除NO_x的影响

以Cu-TEPA为模板剂原位水热合成一系列具有优良deNOx特性的Cu-SSZ-13/堇青石整体式催化剂.为进一步改善其氨的选择性催化还原氮氧化物的活性,在制备过程中添加HF对原位制备Cu-SSZ-13/堇青石整体式催化剂进行改性.利用XRD、SEM、XPS、BET、ICP-AES等对样品进行了表征.结果表明,当nHF/nAl在0.015—0.0375时,晶化72 h的Cu-SSZ-13/堇青石表现出了优异的脱硝性能和抗老化性能,其最大转化率为99.8%,NOx转化率保持在90%以上的最宽活性温度窗口为280—640℃,而无HF的新鲜样品的NOx转化率保持在90%以上的活性温度窗口为300—580℃;720℃老化50 h处理后,nHF/nAl=0.015—0.0375样品的NOx转化率保持在90%以上的最宽活性温度窗口为360—520℃,未添加HF的老化样品相应的活性温度窗口为400—500℃.无论新鲜还是老化,nHF/nAl=0.015—0.0375样品在低温段200—300℃和高温段500—700℃的NOx转化率基本都大于未添加HF的样品.结合表征结果,在催化剂原位水热合成过程中HF的加入既提高了样品的相对结晶度和负载量,又增大了样品的比表面积和比孔容,且提高了Cu-SSZ-13/堇青石骨架结构的稳定性,进而在一定程度上改善了Cu-SSZ-13/堇青石的高温脱硝活性和水热稳定性.     

HNO_3在气相及SiO_2表面的紫外光解反应

利用紫外及红外吸收光谱等分析手段对365 nm光照下HNO3在气相与SiO2表面的光解反应进行了研究.考察了HNO3浓度、光照时间、相对湿度等条件对反应的影响.结果表明:随着HNO3浓度及光照时间的增加,光解产生的NO2和NO浓度均呈指数增加;无水汽情况下,400 Pa的HNO3光解45 min后,产生NO2及NO浓度比气相光解产生的分别高约3及1.7倍.HNO3光解产生的HONO的浓度随相对湿度的增加而呈线性增加,在SiO2颗粒物表面光解产生的NO2浓度随着相对湿度的增加而减少,而NO浓度则随之增大.400 Pa的HNO3光照45 min后,SiO2表面光解产生的HONO浓度是气相光解的3倍、SiO2表面暗反应的约30倍.     

Experimental and theoretical research on the inhibition performance of ethanol gasoline/air explosion by C6F12O

The safety issue of ethanol gasoline and the methods to control or weaken its explosion have attracted attention. To clarify the effect of C₆F₁₂O (perfluoro(2-methyl-3-pentanone)) on the explosion of ethanol gasoline-air mixtures and intrinsic mechanism, the explosion overpressure and flame propagation behavior under different equivalence ratios (φ = 0.6–0.8) and C₆F₁₂O concentrations (χ_inh = 0–4.0%) were experimentally obtained. The detailed inhibitor reaction process was also obtained by CHEMKIN based on a new assembly kinetic mechanism. The results show that the effects of C₆F₁₂O on the explosion characteristics of ethanol gasoline varied with χ_inh and φ. For rich flames, C₆F₁₂O is more effective than and heptafluoropropane (C₃HF₇) and nitrogen (N₂) in suppressing explosions; for lean and equivalence ratio flames, the addition of C₆F₁₂O may result in more severe explosions. The decrease in chemical reactivity is mainly because the mole fractions of OH and H radicals and the proportion of paths H radicals involved decrease after adding C₆F₁₂O, and R1500: CF₃COF + H = CF₃CO + HF, R965: CF₂:O + H = CF:O + HF, R863: CF₃ + H = CF₂ + HF are main suppressing reactions.     

大气VOCs在线监测系统测量准确性分析

基于在线气相色谱-氢火焰离子检测/质谱(GC-FID/MS)方法,在线测量116种大气挥发性有机物的性能指标(线性关系、检出限、精密度、正确度、期间正确度和期间精密度).基于在线监测系统连续7d的实际运行情况,定量评估116种有机物在实际长期运行中测量的准确性和可靠性.结果 表明,116种组分中,109种组分的线性相关...     

SPE-UPLC-MS/MS法测定地下水中多种农药残留

采用固相萃取超高效液相色谱串联质谱法(SPE-UPLC-MS/MS)同时测定地下水中涕灭威、克百威、2,4滴和五氯酚等4种农药残留,通过优化试验条件,使方法在10.0μg/L～200μg/L范围内线性良好,检出限为0.003μg/L～0.006μg/L.标准溶液低、中2个质量浓度水平的加标回收率为84.1％ ～98.8...     

Water quality modelling of the river Yamuna (India) using QUAL2E-UNCAS

This paper describes the utility of QUAL2E as a modelling package in the evaluation of a water quality improvement programme. In this study, QUAL2E was applied to determine the pollution loads in the river Yamuna during its course through the national capital territory of Delhi, India. The study aimed at examining the influence of different scenarios on river water quality. Four different pollution scenarios were analysed besides the 'business as usual' situation. The study revealed that it was necessary to treat the discharge from drains to the river Yamuna and diversion of a substantial load to the Agra canal for further treatment was also essential. It was also established through this study that maintaining a flow rate of more than 10 m(3)/s in the river could also help preserve the river's water quality. To clearly display the model outcomes and demarcate polluted zones in the river stretch, model results were interfaced with a Geographical Information System (GIS) to produce cartographic outputs. In addition, uncertainty analysis in the form of first-order error analysis and Monte Carlo analysis was performed, to realise the effect of each model parameter on DO and BOD predictions. The uncertainty analysis gave satisfactory results on simulated data.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

Criteria for the Assessment of Sustainable Water Management

Pressure on the world’s water resources is increasing, restraining social and economic development in many countries, and threatening ecological values in others. In order to manage water resources in a more sustainable manner, new planning methodologies/processes for river basin management need to be developed. This study attempts to construct a set of useable normative criteria for the analysis and evaluation of such processes. The criteria were designed as a response to the lack of deductive approaches in the evaluation of methodologies and working procedures used in the context of river basin management, making it possible to highlight their potential for sustainable development. The criteria are based on the twin concepts of participation and integration. These concepts function as well-established dimensions of both sustainable development and sustainable river basin management, and they are of significant methodological relevance. A synthesis of the key aspects connected to the two concepts is undertaken, based on a broad literature review. Focus is laid on how in methodological terms, and in relation to regional water management, to achieve participation and integration in a decision-making or planning process. The criteria are concerned with how knowledge and values are integrated into the planning process and how commitment, legitimacy, or acceptance for the resulting plan is generated.     

Bi2MoO6/纳米棒ZnO异质结对MB的可见光-压电协同降解性能研究

采用水热法合成了一系列不同负载率的Bi₂MoO₆/纳米棒ZnO复合光催化剂.通过XRD、FT-IR、SEM、TEM、XPS、UV-Vis、EPR和PL等分析技术对合成的样品进行表征.在光/超声波条件下,以亚甲基蓝（MB）为目标降解物评价其压电-光催化性能.结果表明：Bi₂MoO₆/ZnO纳米棒（BZ-0.6）的降解速率常数约为ZnO传统光催化的9.25倍,其性能提升的主要原因在于ZnO的压电效应与Bi₂MoO₆/ZnO界面形成的异质结的耦合,有效地促进了电子和空穴的分离和转移.此外,同实验条件下,循环利用5次后Bi₂MoO₆/ZnO复合光催化剂降解率仍保持良好的稳定性.