表面活性剂辅助离子液体预处理稻秆的酶解动力学与结构变化分析

以稻秆为原料进行酶解研究,考察了纤维素酶和β-葡萄糖苷酶单独作用及协同作用对稻秆酶解还原糖产量的影响,以确定最佳酶体系,并研究在最佳酶体系中不同种类表面活性剂辅助离子液体对稻秆酶解的影响和动力学特征,最后通过稻秆成分分析、FTIR、XRD、SEM对预处理前后的稻秆结构、结晶性进行了分析比较.结果表明,纤维素酶与β-葡萄糖苷酶具有协同作用,而且在最佳酶体系中,与未处理稻秆及单独离子液体预处理相比,不同种类表面活性剂辅助离子液体预处理的稻秆在酶水解48 h时纤维转化率分别增加40%~85%、10%~31%,并且预处理对反应速率的提高有促进作用.     

三峡库区典型土壤酸碱缓冲性能及其影响因素研究

受酸沉降和化肥施用等外源性酸输入的影响,三峡库区土壤面临着严重的酸化威胁。通过选取三峡库区两种典型土壤(紫色土和黄壤)作为研究对象,采用酸碱滴定法对土壤酸碱缓冲性能及其影响因素进行了研究。结果表明:在一定的p H范围内,紫色土(p H 6.5~2.5、6.2~11.5)和黄壤(p H 5.6~2.8、5.5~10.7)的p H变化与外源性酸、碱加入量均呈线性相关关系。通过分段拟合获取的缓冲容量结果显示,紫色土酸、碱缓冲容量分别为101.3、34.6 mmol/kg;而黄壤酸、碱缓冲容量分别为105.3、38.0 mmol/kg。黄壤和紫色土主要受碳酸钙与阳离子交换的缓冲作用;缓冲体系及初始p H、机械组成等土壤理化性质的不同是导致库区典型土壤酸碱缓冲容量差异的主要原因,总体表现为黄壤酸、碱缓冲性能略优于紫色土。此外,由于近年来酸沉降和氮肥用量的增加,使得库区土壤面临的酸化威胁呈上升趋势。该结果对库区土壤环境容量和典型土壤酸化潜势等研究具有参考价值,还可为区域外源性酸临界值评估以及应对策略制定提供理论依据。     

两种表面活性剂对剩余污泥产酸影响的比较研究

在批式反应器中研究了常温下2种(两性和阳离子)表面活性剂对剩余污泥产酸的影响,结果表明,2种表面活性剂均能较大幅度地提高剩余污泥生产有机酸的产量.在污泥发酵的第4天,0.1g·g-1(表面活性剂与污泥干重比,下同)的两性和阳离子表面活性剂可分别使剩余污泥生产有机酸的浓度达到226.4和861.4 mg·L-1(以COD计,下同),而空白试验中生成的有机酸浓度仅为3.2 mg·L-1.同时,剩余污泥的有机酸产量随表面活性剂加入量的增加而增加.当表面活性剂的加入量低于0.2 g·g-1时,用两性表面活性剂处理的剩余污泥中有机酸浓度仅为用阳离子表面活性剂处理的剩余污泥中有机酸浓度的50%;当表面活性剂的加入量增至0.3 g·g-1时,两者的有机酸最大产量接近.此外,表面活性剂的种类和加入量对有机酸的组成分布也有一定的影响.     

复合污染中Triton X-100在膨润土/水界面上的吸附行为

研究了水溶液中膨润土对非离子表面活性剂Triton X-100(X-100)的吸附,重点探讨了阳离子表面活性剂CPC、阴离子表面活性剂SDBS、中性无机盐NaCl及温度对膨润土吸附TX-100的影响.结果表明,Na基膨润土吸附TX-100的效果好于Ca基膨润土;低浓度CPC对膨润土吸附TX-100具有增强作用,当CPC初始浓度大于l0000 mg·L-1(平衡浓度Ce约为1CMC)时具有抑制作用,当CPC浓度低于3000 mg·L-1(Ce约为0.03CMC)时,TX-100吸附量与CPC浓度成线性正相关.SDBS能显著降低膨润土对TX-100的吸附,原因是溶液中SDBS与TX-100混合胶束的形成能阻止TX-100与膨润土硅氧表面间的氢键作用及在其表面形成胶束.NaCl的存在可以大大提高膨润土对TX-100的吸附,去除率由56%提高到99%以上.膨润土对TX-100的吸附随温度升高吸附量增大,其吸附热为12.68 kJ·mol-1,标准自由能的减小和熵值的增大是TX-100在膨润土上吸附的推动力.实验结果对用膨润土处理含表面活性剂废水具有一定的理论价值.     

超滤处理洗涤污水循环利用的中试研究

采用不同材质国产超滤膜聚丙烯（PP）、聚丙烯腈（PAN）和聚砜（PS）,进行了洗涤污水处理循环利用的现场中试研究.结合超滤工艺出水水质和膜污染分析,3种膜材质中PAN膜较优,有效去除了水中浊度、悬浮物、油脂等污染物,一定程度保留了游离阴离子表面活性剂（LAS）,长期循环洗涤对衣物的白度无不良影响.根据相关性分析,超滤出水较高COD值很大程度上是由水中LAS引起的.超滤膜对细菌、大肠菌群的去除率较低,出水通过紫外消毒,当紫外线密度≥3?750 J/m²时,微生物水平能够达到国家饮用水水质标准.根据不同水力反冲洗条件下膜渗透通量和净产水量比较,PAN膜最佳水力反冲洗条件为0.5 h反冲洗2 min.长期运行时超滤膜化学清洗方法采用碱洗法方便有效.     

表面活性剂在多环芳烃污染土壤修复中的应用

介绍了单一表面活性剂（非离子表面活性剂、生物表面活性剂）、阴-非离子混合表面活性剂对多环芳烃的增溶作用、增溶机理及无机离子对表面活性剂增溶能力的影响,综述了化学表面活性剂和生物表面活性剂在污染土壤生物修复中的应用。由于生物表面活性剂具有许多独特的优点,今后应加强生物表面活性剂的开发与应用研究。     

改性乙二醛-水玻璃化学灌浆材料的研究

研究了一种改性乙二醛一水玻璃化学灌浆材料,其胶凝时间可由乙二醛的加入量控制．抗压强度大．表面活性剂甲的加入可以有效提高其渗透性。     

EDTA滴定法测定高锰水体总硬度的干扰和消除

测定水质总硬度最常用的是EDTA 滴定法,该法易受到多种因素的影响,而锰是重要影响因素之一。分析了锰对EDTA滴定法的影响,对比了两种掩蔽剂对不同浓度锰的掩蔽效果和对检测结果的影响。对实验结果进行了总结分析,为EDTA滴定法测定高锰水体总硬度过程中不同掩蔽剂的选择提供一定的依据。     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Reducing plant uptake of PAHs by cationic surfactant-enhanced soil retention

Reducing the transfer of contaminants from soils to plants is a promising approach to produce safe agricultural products grown on contaminated soils. In this study, 0-400 mg/kg cetyltrimethylammonium bromide (CTMAB) and dodecylpyridinium bromide (DDPB) were separately utilized to enhance the sorption of PAHs onto soils, thereby reducing the transfer of PAHs from soil to soil solution and subsequently to plants. Concentrations of phenanthrene and pyrene in vegetables grown in contaminated soils treated with the cationic surfactants were lower than those grown in the surfactant-free control. The maximum reductions of phenanthrene and pyrene were 66% and 51% for chrysanthemum (Chrysanthemum coronarium L.), 62% and 71% for cabbage (Brassica campestris L.), and 34% and 53% for lettuce (Lactuca sativa L.), respectively. Considering the impacts of cationic surfactants on plant growth and soil microbial activity, CTMAB was more appropriate to employ, and the most effective dose was 100-200 mg/kg.