超临界水氧化技术研究进展

超临界水氧化技术是一种新兴的、高效的高级氧化技术具有广阔的应用前景。该方法具有独特的技术性和经济性。主要介绍超临界氧化技术的研究现状、应用领域,同时指出存在的问题和对策及发展前景分析。     

某机场大气环境现状监测分析

为了研究机场大气环境质量状况,在某机场选取三个监测点,在正常飞行条件下,对不同时间段污染物浓度进行监测与分析。测试结果表明:七天监测期间,机场及机场周围SO2、NO2浓度均未超标,PM10在机场内部有一天超标;各时间段SO2的贡献率在2.9%~12%,各时间段NO2的贡献率在6.9%~77%,机场飞机的尾气对周围空气质量的影响不容忽视。     

基于神经网络的生化池能耗预测模型研究

我国城市污水处理的能耗处于较高水平,直接能耗中电耗占60%~90%。为了合理利用电能,以A/O工艺为基础,选取BP神经网络建立能耗预测模型,由入水信息对溶解氧进行预测,为污水处理过程中曝气量的及时调度、有效利用能量提供可靠的决策依据。     

Reaction mechanism and metal ion transformation in photocatalytic ozonation of phenol and oxalic acid with Ag+/TiO2

Photocatalytic ozonation of phenol and oxalic acid （OA） was conducted with a Ag^＋/TiO2 catalyst and different pathways were found for the degradation of different compounds. Ag^＋ greatly promoted the photocatalytic degradation of contaminants due to its role as an electron scavenger. It also accelerated the removal rate of OA in ozonation and the simultaneous process for its complex reaction with oxalate. Phenol could be degraded both in direct ozonation and photolysis, but the TOC removal rates were much higher in the simultaneous processes due to the oxidation of hydroxyl radicals resulting from synergetic effects. The sequence of photo-illumination and ozone exposure in the combined process showed quite different effects in phenol degradation and TOC removal. The synergetic effects in different combined processes were found to be highly related to the properties of the target pollutants. The color change of the solution and TEM result confirmed that Ag＋ was easily reduced and deposited on the surface of Tit2 under photo-illumination, and dissolved again into solution in the presence of ozone. This simple cycle of enrichment and distribution of Ag^＋ can greatly benefit the design of advanced oxidation processes, in which the sequences of ozone and photo-illumination can be varied according to the needs for catalyst recycling and the different properties of pollutants.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Genotoxicity removal of reclaimed water during ozonation

Genotoxicity in wastewater and reclaimed water now is gaining increased attention because of genotoxins' potential damage to the ecosystem and human health. The effect of ozonation on genotoxicity in reclaimed water was investigated. It was found that ozonation decreased the genotoxicy dramatically in three tertiary treatment plants. In the further batch ozonation experiment in laboratory,secondary effluent sample used exhibited the genotoxicity of(41.1 ± 4.1) μg 4NQO/L. Ozonation with a dose of 10 mg O3/L completely removed the genotoxicity in secondary effluent. However,after ozonation, the dissolved organic carbonvalue of the sample didn't change much but the specific ultraviolet absorbance(SUVA) value dropped sharply. With the help of Fourier transform infrared spectroscopy, ozonation was found to change chemical aliphatic carbon and C–O of the dissolved arganic matter, which might be the reason of the significant decreases of SUVA and genotoxicity.     

壳聚糖对Cu~(2+)的吸附与解吸

研究了溶液pH值、Cu2+初始浓度、吸附剂投加量、吸附时间及温度对壳聚糖吸附Cu2+的影响,并对达到吸附平衡的壳聚糖进行了解吸研究。结果表明,壳聚糖对Cu2+的吸附量随pH值的升高而增大,在pH值为4.7时,基本达到吸附平衡;吸附过程同时符合Langmuir模型和Freundlich模型,最大吸附量为142.9 mg/g;与拟一级动力学模型相比,拟二级动力学模型可以更好地描述吸附过程;吸附剂最佳投加量为1 g/L。用0.03 mol/L H2SO4溶液做脱附液,搅拌10 min,脱附率为73.4%;经过4次脱附-吸附循环,壳聚糖平衡吸附量变化不大,具有良好的重复使用性。     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.