Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

氧化沟工艺提标过程中总磷的技改分析

昆明第一污水处理厂氧化沟工艺至今已运行25 a,随着滇池水环境的恶化,昆明市于2010年将污水处理厂排放标准由原来的一级B标提升至一级A标,总磷的提标是整个提标过程中的重中之重。作者通过对除磷工艺的摸索,研究了除磷加药工艺优化运行的方式,确定了加药量的计算公式,为国内外其他水厂的提标技改,提供技术参考。     

西安市2013年空气质量状况分析

本文收集西安市2013年环境监测站发布的空气质量指数（AQI）及环境空气状况与监测月报资料,对空气质量等级、AQI变化情况、主要污染物浓度变化趋势及采暖期和非采暖期浓度比较进行分析.研究结果表明：西安市2013空气质量二级以上的达标率为37.8％,年均AQI值为151,SO2、NO2、PM10和PM2.5的月监测浓度变化趋势无显著意义,采暖期平均浓度均显著高于非采暖期平均浓度,PM2.5采暖期均值是非采暖期均值的3.09倍.由此可见控制SO2、NO2、PM10和PM2.5的排放是改善西安市空气质量的重点工作.     

乙酰胺低共熔离子液体吸收SO_2的研究

制备了3种乙酰胺-无机盐类低共熔离子液体,测定了其物理性质并将其应用于SO2气体的吸收。结果表明,这些低共熔离子液体具有和传统离子液体相似的性质,例如熔点低、粘度低、密度高、电导率高以及较宽的液态范围。此类离子液体对SO2气体有较好的吸收能力,而且吸收量和温度的关系满足二次多项式方程。红外光谱结果表明吸收是可逆的,回收的离子液体可高效重复使用至少5次。乙酰胺-硫氰酸钠(3∶1)对SO2的质量分数吸收量为0.554 g/g(20℃,1 atm),具有吸收量高、成本低和易回收的优势,是一个很有前景的SO2吸收剂。     

A/O-MBR系统运行测试及相关动力学分析

以生活污水为处理对象,考察A/O-MBR系统稳态运行状况及抗冲击负荷能力,探讨系统运行过程中基质降解动力学方程。研究结果表明,系统对实际生活污水波动(COD:70~200 mg/L;NH4+-N:18~45 mg/L)的适应性较强,能抗击1.53 kgCOD/(m3·d)的容积负荷,连续运行出水的COD均在40 mg/L以下,NH4+-N均在1.5 mg/L以下,达到GB8978-1996的一级A标;采用Mond模型对COD降解动力学过程进行解析,获得动力学参数Vmax=0.38 d-1及KS=100.98;实验验证该动力学方程能较好地预测A/O-MBR出水水质,可以为A/O-MBR系统处理生活污水工艺设计提供参考。     

水葫芦与猪粪堆肥化过程CO_2与NH_3释放特征研究

为探讨水葫芦与猪粪在交替式好氧厌氧堆肥作用下CO2与NH3产生与释放特征,将水葫芦、猪粪与木屑以1.7:1.0:0.3(湿重比)的比例混合均匀,进行为期56 d交替式好氧厌氧堆肥化处理。结果表明,交替好氧厌氧条件下水葫芦与猪粪混合堆肥尾气中CO2浓度随堆肥进行先增加后缓慢减少,前14 d CO2释放量占该阶段总有机碳(TOC)减少量的92.75%。NH3的释放浓度随堆肥进行而逐渐降低,堆肥NH3释放浓度与温度变化具有明显相关性。NH3挥发是堆肥氮损失的主要根源,占堆肥过程前14 d总氮(TN)损失的73.79%。     

催化臭氧氧化降解水溶液中亚甲基蓝的动力学研究

以废啤酒酵母为原材料、采用吸附-活化法制备得到负载过渡金属铁的活性炭(Fe/AC),对Fe/AC吸附亚甲基蓝(MB)性能和催化臭氧氧化MB效果进行了评价。Fe/AC对MB的吸附符合Langmuir等温吸附模型;20℃,pH=7的条件下,Fe/AC对MB的最大吸附量达到107.43 mg/g。吸附MB达到平衡的Fe/AC催化臭氧氧化降解水中MB,30 min内MB的转化率达到99%以上,5 h后总有机碳(TOC)的降解率达到70%。结合Fe/AC吸附MB特性和催化臭氧氧化MB行为,将Langmuir等温吸附模型分别与近似一级和二级反应动力学模型进行耦合,构建了Langmuir-Kinetic近似一级和近似二级耦合模型,均能较好地拟合MB转化率的动力学数据,但对体系的TOC去除率动力学数据的拟合度较低。     

灰色关联分析的季节性污水处理能耗评价研究

辽宁某污水处理厂采用A/O工艺处理生活污水,工艺运行中能源消耗较大,节能降耗是企业降低污水处理成本的重要环节。通过对该厂监测数据研究发现污水处理能源消耗与季节性因素关系密切。为制定合理的节能工艺运行策略,需要对该厂污水处理能耗状况进行季节性评价研究。文中在综合考虑污水处理能耗与环境因素、工艺运行参数和污水处理效果关系的基础上,选取与污水处理过程密切相关的16个季节性指标,利用各指标四季监测数据波动范围将其划分为3个等级标准,并运用灰色关联分析方法进行四季综合能耗等级评价分析。分析结果表明,目前污水处理厂的工艺运行设置状态更适合于夏季运行,春季和秋季运行状况较为合理,而冬季运行能源浪费较大,应调整运行参数设置,在尾水达标的前提下实现降低能耗的目标。