综合危险性指数法在泰山区地质灾害易发区划分中的应用

地质灾害易发区划分是进行地质灾害防治的基础工作。针对泰安市泰山区地质灾害分布特点,进行区内地质环境特征和危险性分析以及综合危险性指数(含潜在地质灾害强度指数和现状地质灾害强度指数)计算,对区内地质灾害易发程度进行定量评价,将泰山区划分成地质灾害高易发区、中易发区、低易发区和不易发区等4个等级,为今后开展地质灾害防治提供依据。     

A pilot study on the effect of Cu,Zn, and Cd on the spectral curves and chlorophyll of wheat canopy at tiller stage

The aim of this study was to investigate canopy spectral reflectance responses to different levels of heavy metals copper (Cu), zinc (Zn), and cadmium (Cd) induced stress. Random blocks design experiment was conducted to simulate Cu, Zn, and Cd at five concentration levels. Chlorophyll and visible and near infrared canopy reflectance were measured for each treatment 56 days after seeding using chlorophyll meter SPAD-502 and spectroradiometer, respectively. New vegetative indices termed ratio of inclination angles (RIA), MERIS (the medium resolution imaging spectrometer) terrestrial chlorophyll index (MTCI), and normalized difference vegetation index (NDVI) were used to assess the response of canopy spectral reflectance to different heavy metal levels. Significant spectral variability especially in blue, red, and near infrared reflectance was observed for different heavy metal treatments. One-sample test showed significant difference for NDVI, MTCI, and RIA among five-level treatments at the 0.01 level. Correlation analysis demonstrated that the two vegetative indices (RIA and MTCI) were significantly correlated with chlorophyll meter values for Cd, Cu, and Zn treatments. However, NDVI was only significantly correlated with chlorophyll meter values for Cu and Zn treatments. Linear regression analysis also illustrated that RIA and MTCI were potential indices for predicting chlorophyll concentration with significant F test under Cu-, Zn-, and Cd-mediated stress.     

基于Z指数的昆明市洪涝研究

本文基于昆明市12个气象站点1963～2013年逐月降水量数据,采用Z指数的方法,得到旱涝等级评定结果,对昆明市洪涝的时空分布特征及成因进行了深入分析与研究,在此基础上提出防洪减灾对策.研究结果表明:时间分布上,昆明市在1963～2013年间,降水量经历了上升-下降-上升下降的波动状态,51年内共出现了8次重涝,3次大涝,10次偏涝,洪涝类型以重涝和偏涝为主,洪涝主要集中出分布在60年代中期至70年代中期、80年代末至21世纪初.空间分布上,昆明市的主城区昆明及其下风方向的嵩明地区降水较多,洪涝程度最为严重,呈贡、东川地区的降水较少,洪涝程度最轻.影响因素上,影响降水量最大的自然因素是相对湿度,其次是蒸发量及总云量;最大的人为因素是城市人口,其次是SO2排放量、建成区面积及道路面积.     

Cytogenetic studies of chromium (III) oxide nanoparticles on Allium cepa root tip cells

The current study evaluates the cytogenetic effects of chromium (III) oxide nanoparticles on the root cells of Allium cepa. The root tip cells of A. cepa were treated with the aqueous dispersions of Cr₂O₃ nanoparticles (NPs) at five different concentrations (0.01, 0.1, 1, 10, and 100 μg/mL) for 4 hr. The colloidal stability of the nanoparticle suspensions during the exposure period were ascertained by particle size analyses. After 4 hr exposure to Cr₂O₃ NPs, a significant decrease in mitotic index (MI) from 35.56% (Control) to 35.26% (0.01 μg/mL), 34.64% (0.1 μg/mL), 32.73% (1 μg/mL), 29.6% (10 μg/mL) and 20.92% (100 μg/mL) was noted. The optical, fluorescence and confocal laser scanning microscopic analyses demonstrated specific chromosomal aberrations such as—chromosome stickiness, chromosome breaks, laggard chromosome, clumped chromosome, multipolar phases, nuclear notch, and nuclear bud at different exposure concentrations. The concentration-dependent internalization/bio-uptake of Cr₂O₃ NPs may have contributed to the enhanced production of anti oxidant enzyme, superoxide dismutase to counteract the oxidative stress, which in turn resulted in observed chromosomal aberrations and cytogenetic effects. These results suggest that A. cepa root tip assay can be successfully applied for evaluating environmental risk of Cr₂O₃ NPs over a wide range of concentrations.     

浙江省畜禽养殖业废水污染特征及环境风险评估研究

根据国家畜禽养殖业水污染物排放标准意见征求工作,对浙江省8家不同规模的养猪场开展了监测分析。研究发现,废水中COD、TN、NH4－N和BOD5等主要污染因子平均浓度超出征求意见稿中直接排放限值;重金属元素Zn和As最大的超标倍数分别为3.87和0.7倍;废水的综合污染指数为7.23,为重度污染级。进一步验证了畜禽养殖业废水属高污染、高环境风险废水,要达到国家畜禽养殖业水污染物排放标准,需整体提升当前的畜禽养殖废水处理深度。     

安顺煤矿超前排放钻孔有效排放半径研究及应用

为了解决瓦斯排放孔半径测定过程中由于方法选择和操作等原因而出现的测定结果不够准确,以及由此而导致的空白带出现问题,通过现场试验,采用钻屑解吸指标法测定的方法,通过对测定结果进行综合分析、修正,确定安顺煤矿Φ42 mm直径的排放钻孔有效作用半径为R0.25 m,Φ90 mm直径的排放钻孔有效作用半径为R0.55 m,经实践证明是准确和可靠的,排放钻孔措施在实施过程中有效地避免了空白带的出现。     

煤炭开采的生物多样性评价指标体系构建

煤炭是中国的主要能源,在开采过程中,不仅会产生诸如大气污染、水污染等污染源,同时会对开发范围内的生态系统造成一定破坏,随着环境影响评价工作的实践积累,技术方法也在不断提高,本文期望通过建立一套煤炭开采的生物多样性评价指标体系,定量和定性分析煤炭开采前生物多样性现状及开采过程中对生物多样性的影响。     

湖库富营养化状态的快速评价

介绍了实现富营养化评价的EXCEL自定义函数的代码编写、模块保存与导入、函数使用等。以富营养化评价的实例,说明使用自定义函数求解含多参数的复杂计算是很方便的。     

Modeling and optimization of turning duplex stainless steels

The attractive combination of high mechanical strength, good corrosion resistance and relatively low cost has contributed to making duplex stainless steels (DSSs) one of the fastest growing groups of stainless steels. As the importance of DSSs is increasing, practical information about their successful machining is expected to be crucial. To address this industrial need, standard EN 1.4462 and super EN 1.4410 DSSs are machined under constant cutting speed multi-pass facing operations. A systematic approach which employs different modeling and optimization tools under a three phase investigation scheme has been adopted. In phase I, the effect of design variables such as cutting parameters, cutting fluids and axial length of cuts are investigated using the D-Optimal method. The mathematical models for performance characteristics such as; percentage increase in radial cutting force (%F_r), effective cutting power (P_e), maximum tool flank wear (VB_max) and chip volume ratio (R) are developed using response surface methodology (RSM). The adequacy of derived models for each cutting scenario is checked using analysis of variance (ANOVA). Parametric meta-heuristic optimization using Cuckoo search (CS) algorithm is then performed to determine the optimum design variable set for each performance. In the phase II, comprehensive experiment-based production cost and production rate models are developed. To overcome the conflict between the desire of minimizing the production cost and maximizing the production rate, compromise solutions are suggested using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The alternatives are ranked according to their relative closeness to the ideal solution. In the phase III, expert systems based on fuzzy rule modeling approach are adopted to derive measures of machining operational sustainability called operational sustainability index (OSI). Artificial neural network (ANN) based models are developed to study the effect of design variables on computed OSIs. Cuckoo search neural network systems (CSNNS) are finally utilized to constrainedly optimize the cutting process per each cutting scenario. The most appropriate cutting setup to ensure successful turning of standard EN 1.4462 and super EN 1.4410 for each scenario is selected in accordance with conditions which give the maximum OSI.     

苯储罐区火灾爆炸风险分析及对策措施

针对苯储罐区所处的区域位置及火灾爆炸危险性,运用道化学火灾、爆炸危险指数法对苯储罐区的火灾、爆炸风险进行分析评价,得出其安全措施补偿前后的火灾、爆炸指数,确定危险等级,并提出了预防火灾爆炸事故的对策措施。