典型印染废水处理过程中芳香烃化合物的污染特征及污泥生态风险评价

采用GC-MS测定了典型综合印染废水处理厂废水和污泥中芳香烃化合物的含量.结果表明,原水中苯系物总量为203.96±15.18μg·L-1,其中二甲苯占62.7%,尾水中苯系物总量为0.2±0.029μg·L-1,整个处理工艺对苯系物的去除效率为99%.原水中多环芳烃(PAHs)总浓度达1349.51±35.77 ng·L-1,以3—6环为主,主要富集在颗粒物上.整个工艺对PAHs的去除效率为95%,尾水中PAHs总浓度为65.81±20.99ng·L-1,以2—3环为主.干污泥中PAHs含量高达2996.10±151.0 ng·g-1,污泥吸附为水相中PAHs去除的主要机理之一.印染污泥直接填埋或农用会引起潜在的生态危害.     

Transverse approach between real world concentrations of SO2, NO2, BTEX, aldehyde emissions and corrosion in the Grand Mare tunnel

With regard to automotive traffic, a tunnel-type semi enclosed atmosphere is characterized by a higher concentration of gaseous pollutants than on urban traffic roads and highlights the gaseous effluent species having an impact on material degradation. Therefore, a transverse approach between air quality and its consequences upon the longevity of materials is necessary, implying better knowledge of tunnel atmosphere and a better understanding of material degradation inside a tunnel for operating administration. Gaseous pollutant measurements carried out in a road tunnel in Rouen (Normandy) give the real world traffic concentrations of experimental exposure conditions. The sampling campaigns, achieved in summer and winter include SO₂, NO₂, BTEX and aldehyde analyses. Effluent profiles in the upward and downward tubes have been established. The current work shows that SO₂, NO₂, formaldehyde, acetaldehyde, propanal and butanal must be considered in the degradation process of materials in a stuffy environment. As regards NO₂, its concentration depends on the modification of the automotive fleet. The total aldehyde concentrations indicate no particular trend between the two bores. Formaldehyde, acetaldehyde, propanal, butanal and acrolein species are the most abundant species emitted by vehicles and represent 90% to 95% of the total aldehyde emissions.     

Combined application of conservative transport modelling and compound-specific carbon isotope analyses to assess in situ attenuation of benzene, toluene, and o-xylene

In recent years, compound specific isotope analyses (CSIA) have developed into one of the most powerful tools for the quantification of in situ biodegradation of organic contaminants. In this approach, the calculation of the extent of biodegradation of organic contaminants in aquifers is usually based on the Rayleigh equation, and thus neglects physical transport processes such as dispersion that contribute to contaminant dilution in aquifers. Here we combine compound specific isotope analyses with a conservative transport model to study the attenuation of aromatic hydrocarbons at a former gasworks site. The conservative transport model was first used to simulate concentration reductions caused by dilution at wells downgradient of a BTEX source. In a second step, the diluted concentrations, together with the available stable carbon isotope ratios and carbon fractionation factors for benzene, toluene and o-xylene were applied in the Rayleigh equation to quantify the degree of biodegradation at each of those wells. At the investigated site, where other attenuation processes such as sorption and volatilisation were proven to be negligible, the combined approach is recommended for benzene, which represents a compound for which the effect of biodegradation is comparable to or less than the effect of dilution. As demonstrated for toluene and o-xylene, the application of the Rayleigh equation alone is sufficient if dilution can be proved to be insignificant in comparison to biodegradation. The analysis also suggests that the source width and the position of the observation wells relative to the plume center line are significantly related to the degree of dilution.     

南京市大气中挥发性有机物污染的研究

1　IntroductionVolatileorganiccompounds (VOCs)areimportantairpollutantsintheurbanatmosphere .SomeVOCsaretoxicandpotentiallycarcinogenic.ExposuretoVOCsisofconcernasitmayresultinsignificantrisktohumanhealth .AmbientVOCsareemittedfromvariousurban ,industrial…     

Modelling biodegradation of hydrocarbons in aquifers: when is the use of the instantaneous reaction approximation justified?

In-situ bio-remediation is a viable cleanup alternative for aquifers contaminated by hydrocarbons such as BTEX. Transport models of varying complexity and capabilities are used to quantify their degradation. A model that has gained wide acceptance in applications is BIOPLUME II, which assumes that oxygen-limited biodegradation takes place as an instantaneous reaction. In this work we have employed theoretical analysis, using non-dimensional variables, and numerical modelling to establish a quantitative criterion demarcating the range of validity of the instantaneous reaction approximation against biodegradation kinetics. Oxygen was the limiting species and sorption was ignored. This criterion relates (o), the Dahmk?hler number at oxygen depletion, to O(o)*, the ratio of initial to input oxygen concentration, (o) > or = 0.7(O(o)*)(2) + 0.1O(o)* + 1.8. The derived (o) reflects the intrinsic characteristics of the physical transport and of the biochemical reaction, including the effect of biomass density. Relative availability of oxygen and hydrocarbons exerts a small influence on results. Theory, verified and refined via numerical simulations, showed that significant deviations of instantaneous reactions from kinetics are to be expected in the space-time region s相似文献   

污泥干化过程中苯系物(BTEX)的释放及其致癌风险评价

在模拟污泥干化的条件下,研究了4种类型污水污泥苯系物(BTEX)的释放特征及其影响因素.结果表明,在50-300℃的干化温度范围内,4种污泥的BTEX释放总置在4.20～161.90μg·m-3之间;在温度高于150℃之后,各类污泥中的BTEX释放量大幅增加;而低于150℃的情况下,污泥中BTEX的释放量仅占总BTEX释放量的5.09%.不同温度下污泥的BTEX释放量与其在污泥中的含量之间存在显著的线性关系.不同类型的污泥其所释放的BTEX组分之间具有较大的差别,污泥中BTEX的含量决定其所释放的数量,而其释放强度则取决于干化温度.对污泥释放BTEX进行健康风险评价表明,各类污泥在150～300℃下所释放的苯对暴露人员存在一定的致癌风险,其中女性相对于男性致癌风险更高.控制污泥干化温度可以最大限度地减少BTEX释放,进而降低致癌风险.     

北京大气中BTEX的观测分析与研究

采用二步深冷浓缩与气相色谱/质谱联机对北京大气中的苯类物质(BTEX) 进行了长期连续观测.最近4年观测数据表明:日变化有双峰和3峰变化,冬、春季呈现与交通高峰期吻合的双峰变化,即上午08:00至10:00和下午17:00前后各出现一个高值;秋季日变化中,夜间22:00出现第3峰值;夏季日变化呈3峰型,最大峰值在正午前后.2000～2002年BTEX月平均总浓度为(44.1±24.5) nmol/mol(碳单位),季变化峰值出现在夏季.年际变化趋势中,北京大气BTEX的总平均浓度从 1999 年到2002年大幅度下降.     

蚊香和佛香燃烧过程中苯系物的排放研究

利用小型烟雾箱对6种市售蚊香和5种佛香燃烧过程进行采样研究,定量分析释放的5种苯系物(苯、甲苯、乙苯、对/间二甲苯、邻二甲苯),利用单室质量平衡模型分别计算排放系数.结果表明,蚊香和佛香的不同品牌之间苯系物的排放系数相差较大,蚊香中5种苯系物的平均排放因子分别是77,101,94,250,94μg/g,佛香中5种苯系物的平均排放因子依次是732,598,2084,2349,221μg/g.蚊香与佛香燃烧释放物中含量最高的苯系物均是间/对二甲苯,分别占总含量的41%、39%.取测得的最大排放速率,采用室内空气质量模型模拟一般条件下蚊香和佛香燃烧释放苯系物对室内空气的影响,分析结果显示,燃烧蚊香造成室内苯、甲苯和乙苯的最大模拟浓度分别是31,45,86μg/m3,燃烧佛香造成室内苯、甲苯和乙苯的最大模拟浓度为65,66,187μg/m3.     

污水处理过程中苯系物和氯代烃三相分布规律

为研究污水处理过程中曝气对苯系物中苯、甲苯和二甲苯以及氯代烃中三氯甲烷、四氯化碳、三氯乙烯和四氯乙烯去除的影响,设计了2个反应器,模拟污水处理过程,一个为活性污泥反应器,另一个为没有活性污泥的对照反应器.结果表明,在液相中,30.6%的TOC未经微生物降解而直接因曝气逸散到气相.苯系物的逸散比例达到了100%;三氯甲烷、四氯化碳、三氯乙烯和四氯乙烯的逸散比例分别为27.5%、39.0%、42.4%和38.5%.同时利用密闭水箱研究了生物处理单元中苯系物和氯代烃三相分布规律.在厌氧阶段,固相中苯、甲苯、二甲苯、三氯甲烷、四氯化碳、三氯乙烯和四氯乙烯占总量比例分别为38.7%、43.6%、38.0%、28.8%、24.3%、15.3%和20.5%.在曝气阶段,苯系物全部被去除,氯代烃总量略有下降.二沉池阶段,固相中三氯甲烷、四氯化碳、三氯乙烯、四氯乙烯占总质量的比例分别为5.2%、20.1%、6.8%和0%.      

水解酸化-缺氧生物法处理油田废水的机理

采用水解酸化-缺氧生物法对经物化预处理的油田废水进行试验研究.当进水COD为190～230mg/L,水解酸化段和缺氧段停留时间分别为10,48h时,出水COD为75～83mg/L.运用GC/MS分析油田废水有机污染物在工艺流程中相对组分变化的规律,表明水解酸化和缺氧法处理油田废水时有协同作用,可有效降解废水中酚类化合物、酮类化合物、芳烃和BTEX.运用PCR-DGGE技术,考察不同生物反应器内微生物种群及其分布特征,初步确定水解酸化和缺氧反应器内的优势菌种.