空气中苯系物测定方法的比较

主要讨论了用活性炭吸附,二硫化碳解析气标中的苯系物,比较工作曲线和标准曲线法的差异。其中苯乙烯在两者中的差异较大,用工作曲线更准确。     

Chemical characteristics of aerosols at coastal station in Hong Kong.Ⅱ.Environmental behavior of trace elements during the April 1995 to April 1996

An one-year of sampling aerosol program was carried out during the period of April 1995 to April 1996 atcoastal region, Cape D'Aguilar, in Hong Kong. The trace element composition of aerosol particles(TSP and PM10)were measured and analyzed by using the Instrumental Neutron Activation Analysis (INAA) and Inductive CouplePlasma-Mass Spectrometry(ICP-MS) techniques. The results showed that the polluted elements such as: V, Zn,As, Pb, Cd, Sb, I, Se, Bi, with high enrichment factor( E. F) values, are derived from anthropogenic sources ,while Sc, Al, Fe, Mn, Sm, La, Sr are less than 10 in E. F, these elements are related the crust and soil. Theconcentration of the trace elements are present seasonal variation i.e. summer low and winter high, whereas the Vor noncrustal V(V* ) present summer high and winter low, this phenomenon might be explained by local or regionaloil combustion sources. Use three type of elemental ratio, e.g. La/Sm, Mn* /V* and Bi/Al indicate that both TSPand PM10 of La/Sm ratios are mainly related to soil and dust, Mn*/V* are probably represent fossil combustion andBi/Al are possibly associated with refuse incineration, ferromanganese alloys and aluminum production. The varimaxrotation factor analysis for trace elements was performed. By means of the absolute principal component analysis(APCA) and multiple regression, the contribution of trace elements to possible sources and overall means of traceelements were estimated. The results showed that the present station is impacted by the anthropogenic species,although the quantities are different during the summertime and wintertime.     

Spatial and seasonal variations of atmospheric BTEX,sulfur dioxide,nitrogen dioxide,and ozone concentrations in Istanbul,and health risk assessment of BTEX

Volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, and xylene (BTEX) along with inorganic gases such as sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and ozone (O₃) levels were found in the atmosphere of the Kemerburgaz region where environmental issues became a major concern due to nearby incineration plant and waste disposal facility in Istanbul. Ten sampling locations were selected considering possible sources in the study area. The sampling areas were classified as suburban, industrial, rural, and background regions. Sampling campaigns were carried out for four-week periods from March 2011 to August 2012 in all locations. Elevated concentrations of BTEX around roads and the industrial locations indicated that vehicle exhaust and industrial activities were the main sources of these pollutants in the region. Concentrations of NO₂ were also high around roads. A much more uniform distribution was observed for SO₂ during sampling periods. However higher levels were observed at suburban locations due to the use of coal for local heating especially during winter. Ozone concentrations were low at the industrial locations and roadsides, but high in suburban and rural locations downwind from the sources. The results of these organic and inorganic gases meet the national limit values. Furthermore, a lifetime risk assessment methodology was used to evaluate the potential adverse health effects of BTEX. The mean cancer risk level for benzene was estimated to be 7.71E-07 that is lower than assigned acceptable risk level of 1.0E-04. Toluene, ethylbenzene, and xylenes were lower than the specified level of 1.0 with respect to mean non-carcinogenic risks. The findings reveal that determined BTEX emissions do not pose a health threat to residents in the studied region.     

Real-time wet scavenging of major chemical constituents of aerosols and role of rain intensity in Indian region

Real-time simultaneous studies on chemical characteristics of rainwater and PM₁₀ aerosols were carried out to understand the scavenging of major chemical components in Indian region. The concentrations of Ca²⁺, NH₄⁺, SO₄²⁻ and NO₃⁻ were observed to be lower in the aerosol samples collected during rain as compared to before and after rain events. The most significant reduction was noticed for Ca²⁺ (74%) during rain which showed highest scavenging ratio (SR) and indicated that below-cloud scavenging is an effective removal process for Ca²⁺ in Indian region. Among non-sea salt components, Ca²⁺ had highest SR at Hyderabad indicating typical characteristics of crustal influence as abundance of calcium carbonate in soil dust has been reported in India. However, the levels of these major chemical components gradually got build-up in due course of time. After rain events, the levels of SO₄²⁻ aerosols were noticed to be substantially higher (more than double) within 24 h. In general, scavenging ratios for all components (except Ca²⁺, NH₄⁺ and K⁺) were higher over BOB as compared to Hyderabad. The maximum fall in aerosol levels (BR minus AR) was observed during continuous and low intensity rain events that did not allow building up of aerosol concentrations.     

Phase partitioning modeling of ethanol, isopropanol, and methanol with BTEX compounds in water

This study investigates the equilibrium phase partitioning behavior of ethanol, isopropanol, and methanol in a two-phase liquid-liquid system consisting of water and an individual BTEX (Benzene, Toluene, Ethylbenzene, and Xylenes) compound. A previously developed computer program is enhanced to generate ternary phase diagrams for analysis of each three-component cosolvent-nonaqueous phase liquid (NAPL)-water mixture combination. The required activity coefficients are estimated using the UNIFAC (Universal Quasichemical Functional group Activity Coefficient) model. The UNIFAC-derived ternary phase diagrams generally show good agreement against published experimental data, and similar phase partitioning behavior is observed for every BTEX compound in the presence of the same cosolvent. Furthermore, a set of laboratory experiments is conducted to determine the maximum single-phase water content for every mixture combination considered in this study where the volume composition of the cosolvent and the NAPL components is a blend of 85% alcohol and 15% BTEX compound. Comparison of experimentally-derived maximum single-phase water contents against UNIFAC-derived results shows good agreement for mixtures containing ethanol and methanol, but relatively poor agreement for mixtures containing isopropanol.     

Metal contamination in the lichen Alectoria sarmentosa near the copper smelter of Murdochville, Québec

Lichens were used to evaluate the metal pollution in a forest ecosystem around the smelter of Murdochville, Canada. As reached values 5.8 times higher in the smelter vicinity than in the 'background' sites. This enrichment was 2 times higher for 3 metals (Cu, Cd and Pb). The highest As, Ba, Cd, Cu, and Pb concentrations in lichens were 4, 112, 1, 23, 50 and 952mg/kg respectively. Contamination declined exponentially with increasing distance from the smelter and was related to elevation and slope exposition to the smelter flux. (206)Pb/(207)Pb and (206)Pb/(204)Pb ratios were low close to the smelter (1.16 and 18), but increased with distance to constant values (1.19 and 18.7) and showed an inverse correlation with lead concentrations. Forest contamination was detectable up to 30km from the smelter.     

Depleted uranium mobility and fractionation in contaminated soil (Southern Serbia)

GOAL, SCOPE AND BACKGROUND: During the Balkan conflict in 1999, soil in contaminated areas was enriched in depleted uranium (DU) isotopic signature, relative to the in-situ natural uranium present. After the military activities, most of kinetic DU penetrators or their fragments remained buried in the ground in certain geomorphological and geochemical environments exposed to local weathering conditions. The contamination distribution, mobility and/or fixation of DU in the contaminated soil profile at one hot spot were the subject of our study. The results should disclose what happened with released DU corrosion products in three years elapsed, given the scope of their geochemical fractionation, and mark out the most probable host substrates in investigated soil type. METHODS: Gamma-spectrometric analysis of soil samples taken in the DU penetrator impact-zone was done to obtain present contamination levels. Set of samples is subjected to five-step and three-step sequential extraction procedures, specifically selective to different physical/chemical associations in soil. The stable elements are determined in extracts by the atomic absorption spectroscopy. After the ion-exchange based uranium separation procedure, alpha-spectrometric analysis of obtained fractions was done and DU distribution in five extraction phases found from 235U/238U and 234U/238U isotopic ratios. RESULTS: Depleted uranium concentration falls down to the 1% of the initial value, at approximately 150 mm distance to the source. Carbonates and iron/manganese hydrous oxides are indicated as the most probable substrates for depleted uranium in the characterized soil type. Therefore, in the highly contaminated soil samples, depleted uranium is still weakly bonded and easy exchangeable. The significant levels of organic-bonded depleted uranium are found in surface soil only. DISCUSSION: Dependence of the fractionation on the contamination levels is evident. Samples with higher DU contents have shown a longer maintenance in the exchangeable phases, probably because adsorption/desorption mass transfer through the medium was not very fast. Organic-bonded, depleted uranium is present in surface soil samples due to its higher humus content. Considering geochemical composition of investigated soil, the indicating chemical associations as substrates are in agreement with some considerations based on the results for low-level waste unsaturated zones. CONCLUSIONS: The soil contamination with depleted uranium in investigated area is still 'spot' type and not widespread. Dependence of the fractionation on the contamination levels and presence of weakly bonded, depleted uranium in the hot spots areas is evident. RECOMMENDATIONS AND PERSPECTIVES: A detailed study may be undertaken with suitable extractive reagents to define a bio-available fraction of depleted uranium in soil. The comparison of results for different soil types investigated by the same methodology may be useful. An applied combination of physical/chemical procedures and analysis may help in the decision making on the remediation strategy for sites contaminated with depleted uranium used in military operations.     

公共场所BTEX的污染特征、源解析及健康风险

分析评价了杭州市商场、超市、影院、车站候车室等公共场所室内空气中BTEX的污染特征、来源及健康风险.结果表明,公共场所中BTEX的总平均浓度为30.68～217.74 μg·m-3,商场的污染最重,车站候车室的污染最轻;甲苯与BTEX总浓度之间具有较好的线性关系,可作为公共场所BTEX污染的代表物;候车室BTEX污染主要受室外污染源的影响,而在其它公共场所中,室内污染源占主导地位,鞋用胶粘剂是商场BTEX的主要污染来源;商场空气中苯对男性和女性工作人员的致癌风险分别为5.38×10-6和5.57×10-6,超过了美国EPA制定的人体致癌风险值(1×10-6).     

2种统计方法在一次实验室间比对中的应用比较

比较了稳健统计法和误差系数法在水中苯系物实验室间比对结果中的应用,分别采用两种方法对比对结果进行了分析,探讨了两种统计方法的差异和适用范围。结果显示,两种方法对此次比对结果的分析结论基本一致,在实际应用中应跟据实验室间比对的目的和样品特点选择合适的统计方法。     

Sources of Volatile Organic Compounds in a University Building

A total of 34 volatile organic compounds (VOCs) were measured in the indoor of laboratories, offices and classrooms of the Chemical Engineering Department of Hacettepe University in Ankara in 2 week-day passive sampling campaigns. The average concentrations ranged from 0.77 to 265 μg m^?3 at the different indoor sites, with the most abundant VOC found to be toluene (119.6 μg m^?3), followed by styrene (21.24 μg m^?3), 2-ethyltoluene (17.11 μg m^?3), n-hexane (10.21 μg m^?3) and benzene (9.42 μg m^?3). According to the factor analysis, the evaporation of solvents used in the laboratories was found to be the dominant source.