Environmental considerations for levees and floodwalls

Levees and floodwalls are used extensively throughout the United States for flood control. Levee projects often lack ecological, recreational, and aesthetic values, except for incidental fish and wildlife benefits derived from borrow pits and recreational facilities found in some urban settings. In recent years increased environmental concern within construction agencies and greater responsiveness to public opinion have resulted in increasing numbers of levee projects designed, built, and maintained with environmental objectives in mind. This paper reviews environmental concepts successfully employed on levee projects constructed in recent years by the US Army Corps of Engineers. Some of the most innovative concepts are described and illustrated and design considerations are discussed.     

LOW DISCHARGE PERIODS OF RIVERS IN THE UPPER VISTULA RIVER BASIN,POLAND1

ABSTRACT: A method is presented for determining low discharge periods of rivers based on threshold values defined in terms of MEAN OF MINIMUM SUMMER (WINTER) DISCHARGES. The method is used to determine summer low flow periods in the Vistula River basin in Poland. Analysis is based on daily discharge data for 84 basins of the Upper Vistula River which was collected by the Polish Institute of Meteorology and Water Economy.     

REAL-TIME SNOW SIMULATION MODEL FOR THE MONONGAHELA RIVER BASIN1

ABSTRACT: The Pittsburgh District, U.S. Army Corps of Engineers, is responsible for operating two multipurpose reservoirs in the 7384 square mile (19198 square kilometer) Monongahela Basin. A third reservoir, presently under construction, will soon be operating. The real-time forecasting of runoff for operational purposes requires simulation of snow accumulation and snowmelt throughout the Basin during the winter season. This article describes capabilities of SNOSIM, a model being developed for performing such simulation. The application of this model as part of a comprehensive system of water control software, and some initial simulation results are presented.     

IDENTIFICATION OF SOLUTE LOADING SOURCES TO A SURFACE STREAM1

ABSTRACT: A study was performed to identify sources of solute loading to the Dirty Devil River and its major tributaries, in southeastern Utah. A primary goal was to determine the contribution of gypsum dissolution to total dissolved solids concentration, and its potential increase in the future if salinity control measures are instituted. Synoptic field data were collected during the low flow period in October 1983. Data were analyzed using the geochemistry models WATEQF and BALANCE to postulate mineral reactions leading to solute loading. Three known sources of solute loading, involving two different geochemical mechanisms, were clearly discernable. Two additional areas of possible gypsum dissolution were located.     

WATER POLICIES FOR ENERGY DEVELOPMENT1

ABSTRACF: Examination of a series of studies of the economically efficient water allocations in the Upper Colorado River, Yellowstone River, and Great Basins indicate that water is not a serious general physical constraint on the development of energy resources, so long as public institutions do not hinder the exchange of water rights in markets. Energy development will cause limited impacts on other water-using sectors, principally agriculture. There appears to be little reason to develop large-scale water storage facilities, even during periods of reduced water production. Water storage developments appear to be necessary only when institutional constraints severely restrict water rights markets and transfers.     

A hierarchical approach to fisheries planning and modeling in the Columbia River Basin

The Columbia River Basin is the scene of a massive effort to restore populations of Pacific salmon (Oncorhynchus spp.) and steelhead (O. mykiss). Efficient restoration is confounded by a high level of complexity, competing sociopolitical goals and values, and uncertainty about key system properties. Simulation models and other tools of systems analysis are important to development of a comprehensive, regionally acceptable strategy. Hierarchy theory provides a useful paradigm for organized complexity within the Columbia Basin and the basis for a trilevel hierarchical structure for organizing and integrating models. Life-stage models compose the most basic simulation units at the lowest level in the proposed hierarchical modeling structure. Each life-stage model simulates a distinct period in the life cycle of anadromous salmonids. Population models at the intermediate level simulate the complete life cycles of salmon and steelhead populations. At the highest level in the hierarchy, interpopulation models simulate extensive, long-term processes that affect multiple species and stocks. A hierarchical system of models is preferable to a single model or to a group of models lacking formal structure. A principal advantage is that models have the correct spatial and temporal resolution for analyzing questions at different scales. A hierarchical structure also facilitates the flow of information among models, and aids in understanding the impacts of uncertainty. Constructing a hierarchy of models should involve both bottom-up and top-down perspectives that maintain logical consistency among models, while allowing unique model structures appropriate for each level in the hierarchy.     

MEASURED AND PREDICTED VELOCITY AND LONGITUDINAL DISPERSION AT STEAI)Y AND UNSTEADY FLOW,COLORADO RIVER,GLEN CANYON DAM TO LAKE MEAD1

ABSTRACT: The effect of unsteadiness of dam releases on velocity and longitudinal dispersion of flow was evaluated by injecting a fluorescent dye into the Colorado River below Glen Canyon Dam and sampling for dye concentration at selected sites downstream. Measurements of a 26-kilometer reach of Glen Canyon, just below Glen Canyon Dam, were made at nearly steady dam releases of 139, 425, and 651 cubic meters per second. Measurements of a 380-kilometer reach of Grand Canyon were made at steady releases of 425 cubic meters per second and at unsteady releases with a daily mean of about 425 cubic meters per second. In Glen Canyon, average flow velocity through the study reach increased directly with discharge, but dispersion was greatest at the lowest of the three flows measured. In Grand Canyon, average flow velocity varied slightly from subreach to subreach at both steady and unsteady flow but was not significantly different at steady and unsteady flow over the entire study reach. Also, longitudinal dispersion was not significantly different during steady and unsteady flow. Long tails on the time-concentration curves at a site, characteristic of most rivers but not predicted by the one-dimensional theory, were not found in this study. Absence of tails on the curves shows that, at the measured flows, the eddies that are characteristic of the Grand Canyon reach do not trap water for a significant length of time. Data from the measurements were used to calibrate a one-dimensional flow model and a solute-transport model. The combined set of calibrated flow and solute-transport models was then used to predict velocity and dispersion at potential dam-release patterns.     

GEOHYDROLOGY AND HYDROCHEMISTRY OF THE DAKOTA AQUIFER,CENTRAL UNITED STATES1

ABSTRACT: The Dakota aquifer, composed of the Dakota Sandstone and stratigraphically equivalent sandstone units of Cretaceous age, is the upper-most regional aquifer underlying the extensively developed High Plains aquifer of the midwestern United States. The concentration of dissolved solids in ground water of the Dakota aquifer ranges from less than 500 milligrams per liter in calcium bicarbonate type water in the eastern outcrop area to more than 100,000 milligrams per liter in sodium chloride type oilfield brine in the Denver Basin to the west. Preliminary maps showing the distribution of dissolved solids confirm the complex nature of the Dakota aquifer as inferred from stratigraphic and hydraulic evidence. Extensive vertical leakage through confining layers, local recharge at the truncated eastern boundary, and a barrier to recharge along the western edge of the Denver Basin are consistent with the distribution of hydraulic head and dissolved solids.     

FLOOD ROUTING THROUGH A FLAT,COMPLEX FLOODPLAIN USING A ONE-DIMENSIONAL UNSTEADY FLOW COMPUTER PROGRAM1

ABSTRACT: The routing of flood waves through the Central Basin of the Passaic River in New Jersey is complex because of flat gradients and flow reversals. The one-dimensional unsteady flow program DWOPER, developed by the National Weather Service, was used to simulate flood wave movement through the Basin. A historical event was used for calibration and two synthetic events were simulated. Boundary conditions consisted of discharge hydrographs at inflow points to the study area, local flow hydrographs at interior points, and a stage discharge relation for flow over the crest of a diversion dam at the basin outlet. Manning's n values were adjusted based on stage and discharge data for the historical event; however, verification data were not available for events comparable in magnitude to the synthetic events. Aspects of the investigation reported include techniques for characterizing the flow system, model calibration, techniques for representing a tunnel diversion, and simulation results.     

KRIGED ESTIMATES OF TRANSMISSIVITY IN THE MESILLA BOLSON,NEW MEXICO1

ABSTRACT: Kriging utilizes a statistically based procedure of spatial interpolation that incorporates the spatial correlation structure of the phenomenon, and provides an error estimate. Kriging was applied to a total of 141 transmissivity values in an attempt to quantify the transmissivity distribution of the Santa Fe aquifer in Mesilla Bolson. New Mexico. The analysis produced contour maps of estimated transmissivity values and associated estimation variances. Through variogram analysis and fitting of an exponential variogrsm to 141 natural log of transmissivity (InT) values, the range was determined to be 3 miles, the average variance 2.74 (σ_InT= 1.65) with a mean of 8.65. Kriged estimates were generally lower when compared to estimates based on available transmissivity maps.