Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

The New Jersey Toxics Reduction Workplan for Ny-Nj Harbor: Distribution of Pcdd/Fs in Ambient Waters

As part of the NJ Toxics Reduction Workplan for NY-NJ Harbor, ambient water samples were collected at fifteen locations along the tidal portions of the Hackensack, Passaic, Raritan, Rahway and Elizabeth Rivers, and in Newark Bay, the Arthur Kill, and Kill van Kull. A Trace Organics Platform Sampler was used to collect a total of 75 suspended sediment phase samples between June 2000 and May 2002. These samples were analyzed for spatial and wet vs. dry weather trends in the 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs; modified USEPA Method 1613b). Mean total PCDD/F (tPCDD/F) concentrations at the sampling locations ranged between 3.8 and 41.5 ng/g. On average, OCDD accounted for almost 80% of the tPCDD/F concentrations; mean total [PCDD/F – OCDD] concentrations ranged between 0.84 and 5.20 ng/g at the sampling locations. Mean 2,3,7,8-TCDD concentrations ranged between 0.003 and 0.28 ng/g, with the highest concentrations (> 0.10 ng/g) along the tidal Passaic and lower Hackensack Rivers, and in upper Newark Bay. Mean tPCDD/F Toxic Equivalency Quotients (TEQ) ranged between 45 and 344 TEQ pg/g, with the highest levels found in the lower Passaic River. Toxicity was primarily driven by 2,3,7,8-TCDD concentrations in the Passaic and Hackensack Rivers, and in Newark Bay. Examples of congener distribution patterns at some of the sampling locations are also presented.     

二氧化硫排放总量控制若干问题的思考

根据国家《“十一五”规划纲要》对削减二氧化硫排放总量的要求，在对电力行业脱硫现状及前景的具体阐述中指出实现这个目标的可能性，并从多方面对二氧化硫总量控制的关键问题进行了详尽的论述与分析。     

TiO2光催化氧化的研究进展

概述了TiO2光催化氧化降解水中污染物的原理及TiO2光催化剂的制备，提出了增强其活性的途径。TiO2光催化氧化可应用于印染、农药、造纸等工业废水及饮用水处理中，研制高效的负栽型纳米TiO2光催化剂、解决太阳能利用问题、开发多功能光催化反应器是今后TiO2光催化氧化的发展趋势。     

淮河流域旱涝易发区农田的陆气相互作用——CO2通量、能量交换和水汽输送的季节变化特征

利用淮河流域旱涝易发区的安徽省寿县农田下垫面陆气相互作用观测试验资料,重点分析观测期内CO2通量、能量交换和水汽输送的季节变化,并讨论了与此有关的辐射分量通量、下垫面反射率、波恩比、能量闭合守恒、土壤温度和土壤湿度的季节变化.结果表明CO2通量、能量分配受地表农作物长势影响明显,其中,水稻灌浆、成熟期,被稻田吸收的CO2通量最大可超过2 mg·m-2·s-1,潜热通量达到正的极大值.稻田光合作用最旺盛时期吸收的CO2通量和释放的潜热通量均大于小麦田光合作用最旺盛时期的对应量.较大土壤热通量对应于较低的土壤水含量.试验观测期的下垫面平均反射率为0.14.作物生长期,稻田表面潜热是下垫面吸收能量的主要消费者,小麦田表面潜热和感热相当.能量闭合率ε的变化范围为0.4～1.     

人机显示/控制界面适配性综合评价指标和评价方法

通过对驾驶舱人机显示 /控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究 ,建立了一套视觉信息流工效综合评估系统研究体系 ;研究的初步结果主要有 ,飞机驾驶员视域中存在最佳、较好、极限工效区 ,并且振动、反射眩光、噪声、显示字符的形状 /颜色特征 /对比度 /显示方式等是影响信息获取工效的主要因素 ;飞机驾驶舱显示布局及显示方式应符合视觉工效学设计原则。     

南昌市环境空气质量分析和控制

利用多年的环境监测数据,分析南昌市环境空气中主要污染物尘类、二氧化硫和氮氧化物产生的原因,并提出有效控制上述污染物的具体措施。     

UV/O3复合降解水中2,4-二氯酚的试验研究

以紫外光源为主要依托,变换反应器中的不同工艺条件,分别对紫外光、臭氧和紫外/臭氧三种不同于工艺条件对水中污染物2,4-二氯酚(2 ,4-DCP)的降解规律进行研究.结果表明,UV/O3复合对2,4-DCP的降解较UV、O3单独作用效果好;溶液的酸碱度影响UV/O3对2 ,4-DCP的降解;此外,溶液中含有细菌时,E. coli的杀灭效果仍表现为UV/O3＞O3＞UV.细菌的杀灭和2,4-DCP的降解均消耗羟基自由基,形成竞争反应,从而影响到2,4-DCP的降解效果.