A national inventory to estimate release of polychlorinated dibenzo-p-dioxins and dibenzofurans in Portugal

Taking into account current environmental concerns, the main objective of this work focused a national inventory aiming to estimate the amount of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) released in Portugal in 2006. The methodology used was based on the Standardized Toolkit for Identification and Quantification of Dioxins and Furan Releases, developed by UNEP Chemicals, in 2005. The method allows the assessment of the amount of PCDD/PCDF released into the environment along five vectors involving air, water, land, products and residues. Facing some difficulties mainly regarding to the availability of data for some activities known to produce PCDD/PCDF, three scenarios (Sc1 to Sc3) corresponding to lower, central and upper estimates were established. The Sc1 scenario (lower estimate) includes the situations where in case of doubt or scarce information, reduced or none emission values were assumed, Sc2 refers to a central estimate, which is believed to be the most realistic for the Portuguese situation, while Sc3 corresponds to the worst case (upper estimate). The results obtained pointed out that the total amount of PCDD/PCDF emitted in Portugal during the period under analysis was in the range of 51.2-217.9 g TEQ year⁻¹, with the most likely value of 95.2 g TEQ year⁻¹ achieved under the Sc2 scenario. This study also showed that the methodology developed by UNEP Chemicals is a very simple one, and the main difficulty is the availability of data. The main indicators calculated in this study were 8.98 μg TEQ/(year person) by taking into account the total amount of PCDD/PCDF released, and 3.63 μg TEQ/(year person) when only air emissions were considered.     

Aggregation and ecotoxicity of CeO₂ nanoparticles in synthetic and natural waters with variable pH, organic matter concentration and ionic strength

The influence of pH (6.0-9.0), natural organic matter (NOM) (0-10 mg C/L) and ionic strength (IS) (1.7-40 mM) on 14 nm CeO₂ NP aggregation and ecotoxicity towards the alga Pseudokirchneriella subcapitata was assessed following a central composite design. Mean NP aggregate sizes ranged between 200 and 10000 nm. Increasing pH and IS enhanced aggregation, while increasing NOM decreased mean aggregate sizes. The 48 h-E_rC20s ranged between 4.7 and 395.8 mg CeO₂/L. An equation for predicting the 48 h-E_rC20 (48 h-E_rC20 = −1626.4 × (pH) + 109.45 × (pH)² + 116.49 × ([NOM]) − 14.317 × (pH) × ([NOM]) + 6007.2) was developed. In a validation study with natural waters the predicted 48 h-E_rC20 was a factor 1.08-2.57 lower compared to the experimental values.     

煤气废水中有机化合物的生物去除特征

好氧/缺氧/好氧生物处理系统是一种新型煤气废水二级处理工艺,该工艺通过改变微生物的生化环境,充分发挥各单元对有机化合物的降解功能,强化了有机化合物总体去除效果.主要采用气相色谱/质谱联用(GC/MS)测试方法,分析对比煤气废水进水及其系统各单元出水中有机化合物的成分,结合生物降解的特点,评价各单元对有机化合物的去除效果...     

氢氧化镁混凝过程絮体形成研究

以不同浊度高岭土水样为研究对象,运用激光光散射法对氢氧化镁混凝剂絮体开始形成时间和氯化镁最小投加量进行测定,探讨了氯化镁投加量对沉后出水浊度和Zeta电位的影响.结果表明:(1)氢氧化镁混凝剂絮体开始形成时间随着氯化镁投加量的增大而缩短;pH增大及浊度增大时,絮体开始形成时间总体缩短,pH=11.5、氯化镁投加量为25...     

杂多酸水溶液脱除烟气中SO2的性能研究

合成了H3PMo12O40、H4SiW12O40、H3PW12O40、H4PMo11VO40、H5PMo10V2O40和H6PMo9V3O406种杂多酸,分别采用红外光谱（FT-IR）和X射线衍射（XRD）表征杂多酸的结构,并采用气相色谱仪对6种杂多酸水溶液进行脱硫实验测试。实验结果表明：制备的6种杂多酸具有良好的Keggin型结构;H3PMo12O40、H3PW12O40和H4SiW12O40的3种水溶液中,磷钼杂多酸的脱硫性能最好,脱硫率在120 min时可达到16.38%;不同比例的多原子也会使杂多酸有不同的脱硫性能,脱硫性能顺序为：H6PMo9V3O40〉H5PMo10V2O40〉H4PMo11VO40;且6种杂多酸的脱硫稳定性的顺序为：H4PMo11VO40〉H6PMo9V3O40〉H3PMo12O40〉H5PMo10V2O40〉H4SiW12O40≈H3PW12O40。     

Dyella ginsengisoli LA-4吸附Cu2+特性及其动力学研究

研究一种新型吸附菌剂Dyella ginsengisoli LA-4(以下简称菌株LA-4)对Cu2+的吸附特性及其动力学,并利用表面响应法优化菌株LA-4对Cu2+的吸附条件.结果表明:(1)菌株LA-4的接种量、pH对Cu2+的吸附有重要的影响.(2)根据表面响应法 优化模型预测出菌株LA-4吸附Cu2+的最...     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响。结果表明,在电流密度为200 mA/cm^2,pH值为3.5,电解440 mg/L的Na2SO3海水脱硫模拟液,15 min时Na2SO3去除率可达96.5%,COD去除率可达82.6%。     

湿法脱硫系统运行中存在问题探讨

分析了石灰石—石膏湿法脱硫系统中烟气系统、吸收塔系统、石灰石系统、石膏脱水系统、废水处理系统等在运行中存在问题,并提出了相应的对策。     

我国电力行业CO2减排技术及应用前景分析

阐述了我国燃煤电厂CO2排放现状及趋势,将CO2减排技术分为捕集与封存两个部分进行讨论,介绍了目前主要的CO2捕集与封存技术及其研究进展,并分析了各种技术的特点及其在我国电力行业的应用前景。指出电厂位置、CO2捕集方案及封存方式三者之间是相互影响、相互制约的,其中CO2去向是关键因素,处于不同地理位置的电厂需根据具体情况选择相适应的CO2捕集与封存技术的组合。探讨了各种捕集与封存技术的应用前景,建议由国家相关部门或行业支持,建设国家或行业层面的工业化试验中心或试验台。