Biochar: A review of its impact on pesticide behavior in soil environments and its potential applications

Biochar is produced from the pyrolysis of carbon-rich plant- and animal-residues under low oxygen and high temperature conditions and has been increasingly used for its positive role in soil compartmentalization through activities such as carbon sequestration and improving soil quality. Biochar is also considered a unique adsorbent due to its high specific surface area and highly carbonaceous nature. Therefore, soil amendments with small amounts of biochar could result in higher adsorption and, consequently, decrease the bioavailability of contaminants to microbial communities, plants, earthworms, and other organisms in the soil. However, the mechanisms affecting the environmental fate and behavior of organic contaminants, especially pesticides in biochar-amended soil, are not well understood. The purpose of this work is to review the role of biochar in primary processes, such as adsorption–desorption and leaching of pesticides. Biochar has demonstrable effects on the fate and effects of pesticides and has been shown to affect the degradation and bioavailability of pesticides for living organisms. Moreover, some key aspects of agricultural and environmental applications of biochar are highlighted.     

Assessment of mobility and bioavailability of contaminants in MSW incineration ash with aquatic and terrestrial bioassays

Incineration of municipal solid waste (MSW) is a waste treatment method which can be sustainable in terms of waste volume reduction as well as a source of renewable energy. In the process fly and bottom ash is generated as a waste material. The ash residue may vary greatly in composition depending on the type of waste incinerated and it can contain elevated levels of harmful contaminants such as heavy metals. In this study, the ecotoxicity of a weathered, untreated incineration bottom ash was characterized as defined by the H14 criterion of the EU Waste Framework Directive by means of an elemental analysis, leaching tests followed by a chemical analysis and a combination of aquatic and solid-phase bioassays. The experiments were conducted to assess the mobility and bioavailability of ash contaminants. A combination of aquatic and terrestrial bioassays was used to determine potentially adverse acute effects of exposure to the solid ash and aqueous ash leachates. The results from the study showed that the bottom ash from a municipal waste incineration plant in mid-Sweden contained levels of metals such as Cu, Pb and Zn, which exceeded the Swedish EPA limit values for inert wastes. The chemical analysis of the ash leachates showed high concentrations of particularly Cr. The leachate concentration of Cr exceeded the limit value for L/S 10 leaching for inert wastes. Filtration of leachates prior to analysis may have underestimated the leachability of complex-forming metals such as Cu and Pb. The germination test of solid ash and ash leachates using T. repens showed a higher inhibition of seedling emergence of seeds exposed to the solid ash than the seeds exposed to ash leachates. This indicated a relatively low mobility of toxicants from the solid ash into the leachates, although some metals exceeded the L/S 10 leaching limit values for inert wastes. The Microtox® toxicity test showed only a very low toxic response to the ash leachate exposure, while the D. magna immobility test showed a moderately high toxic effect of the ash leachates. Overall, the results from this study showed an ecotoxic effect of the solid MSW bottom ash and the corresponding ash leachates. The material may therefore pose an environmental risk if used in construction applications. However, as the testing of the solid ash was rather limited and the ash leachate showed an unusually high leaching of Cr, further assessments are required in order to conclusively characterize the bottom ash studied herein as hazardous according to the H14 criterion.     

Watershed development in India. 2. New approaches for managing externalities and meeting sustainability requirements

This paper recognises the need for a revision of watershed development policy in India in relation to the planning of development interventions involving agricultural intensification and rainwater harvesting and the need for new approaches to assist the planning process. Building on, and using as an example, the results of biophysical and societal impact studies carried out on two watershed development projects in Karnataka three new management/dissemination tools, are suggested. These are (1) the web-based geographical information systems exploratory, climate land assessment and impact management tool dissemination tool for disseminating to policymakers and non-specialist stakeholders the downstream impacts of watershed interventions, (2) the ‘quadrant’ approach for ensuring that sustainability criteria are met and (3) Bayesian networks to investigate the biophysical and societal impacts of interventions. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue     

Relative proportions of polycyclic aromatic hydrocarbons differ between accumulation bioassays and chemical methods to predict bioavailability

Chemical methods to predict the bioavailable fraction of organic contaminants are usually validated in the literature by comparison with established bioassays. A soil spiked with polycyclic aromatic hydrocarbons (PAHs) was aged over six months and subjected to butanol, cyclodextrin and tenax extractions as well as an exhaustive extraction to determine total PAH concentrations at several time points. Earthworm (Eisenia fetida) and rye grass root (Lolium multiflorum) accumulation bioassays were conducted in parallel. Butanol extractions gave the best relationship with earthworm accumulation (r² ≤ 0.54, p ≤ 0.01); cyclodextrin, butanol and acetone-hexane extractions all gave good predictions of accumulation in rye grass roots (r² ≤ 0.86, p ≤ 0.01). However, the profile of the PAHs extracted by the different chemical methods was significantly different (p < 0.01) to that accumulated in the organisms. Biota accumulated a higher proportion of the heavier 4-ringed PAHs. It is concluded that bioaccumulation is a complex process that cannot be predicted by measuring the bioavailable fraction alone.     

Application of modeling and simulation tools in costs and pollution monitoring

This paper presents the development and application of process modeling and simulation tools to aid in the monitoring and measuring of pollution from industry, and investigate a plant's overall performance. A case study of a generic reduction plant is investigated, taking into account the underlying principles that determine the amount of fluoride emissions released from the plant's processes. The simulation study includes the investigation of the gas cleaning system within the plant, such as the system's operating relationships between the scrubbing efficiency, wear of the scrubber filter bags, maintenance costs and its response to the change of scrubbing circulation. Two sets of simulation runs are performed to seek a balance for the plant's overall system performance, taking into account environmental issues (fluoride emissions) and cost. The final simulation result demonstrates that cost savings can be achieved when the plant operates in a cleaner manner.     

DETERMINATION OF DDT AND ITS METABOLITES IN CATTLE DIP SOIL AVAILABLE IN AQUEOUS PHASE AFTER REMEDIATION

Soil taken from a former cattle tick dip site in NSW Australia, was remediated with a chemical leaching technology. The pre- and post-remediated soil (20g) was dispersed in water (100mL) and subjected to passive diffusion using polymeric membranes. The remediation reduced tDDT from 1174.3μg/g to 102.9μg/g (ash weight basis), which was further reduced to 43.2μg/g with composting. The membranes accumulated 41.3μg tDDT/g from the dip soil, 49.2μg tDDT/g from the chemically leached soil and 3.1μg tDDT/g from the leached composted soil. The chemical leaching removed over 90% of the tDDT, but released soil bound DDT, which was converted to DDE, while 2.99μg/g was accumulated by the membranes from dip soil, 37.52μg/g was accumulated from remediated soil. Composting, however, almost eliminated the availability for passive diffusion by the membranes from 50 – 60μg/g in remediated soil to 3–3.5μg/g in composted soil. Variability studies of the membranes using eight replicates demonstrated that the accumulation by the membranes was reproducible with an average relative error of 20.3% for p,p'-DDT in soil type two, whilst the lowest average relative error for p,p'-DDE was 4.3%, suggesting that triplicate analyses will achieve acceptable accuracy.     

Soil sterilization affects aging-related sequestration and bioavailability of p,p′-DDE and anthracene to earthworms

Laboratory experiments investigated the effects of soil sterilization and compound aging on the bioaccumulation of spiked p,p′-DDE and anthracene by Eisenia fetida and Lumbricus terrestris. Declines in bioavailability occurred as pollutant residence time in both sterile and non-sterile soils increased from 3 to 203 d. Accumulation was generally higher in sterile soils during initial periods of aging (from 3-103 d). By 203 d, however, bioavailability of the compounds was unaffected by sterilization. Gamma irradiation and autoclaving may have altered bioavailability by inducing changes in the chemistry of soil organic matter (SOM). The results support a dual-mode partitioning sorption model in which the SOM components associated with short-term sorption (the ‘soft’ or ‘rubbery’ phases) are more affected than are the components associated with long-term sorption (the ‘glassy’ or microcrystalline phases). Risk assessments based on data from experiments in which sterile soil was used could overestimate exposure and bioaccumulation of pollutants.     

New tools in local energy planning: experimenting with scenarios,public participation and environmental assessment

This article presents a model for local energy planning and its application in a full-scale experiment in a Swedish municipality. The model is based on legal requirement, research findings and standards of good practice and includes a combination of analytical and procedural tools intended to support rational decision-making: external scenarios, a citizens’ panel, life cycle analysis and qualitative environmental assessment (EA). The application of the model indicates that the decision-support tools selected can give several new and valuable inputs to local energy planning, such as local knowledge and values through citizen dialogue and comprehensive EAs. However, the experiment also shows that there are several challenges involved in applying the tools, for example, it is difficult to get citizens and the industry to participate and that it is complicated to combine several different tools for decision-making into a single planning process. Moreover, the experiences from the application suggest that the model for local energy planning show great potential but needs to be improved before it can be used as a standard of good practice.     

A material and energy flow model for co-production of heat and power

Co-production of electricity, district heat and industrial heat/process steam (heat and power, CHP) has been applied to a large, national scale, in only a few countries in the world, Denmark, The Netherlands and Finland. In this production method, the waste energy from electricity production is used in two quality levels. First, industrial process steam requirements can be met with this residual energy. Second, the waste energy is used in local district heating networks for households and other buildings in a city. In this integrated production method, a total fuel efficiency of 85% can be achieved. Through the technique of fluidized bed combustion, modern CHP plants can use coal and oil, and in addition, heterogeneous fuels such as biomass, industrial wastes and recycled fuels from households. In this paper, the CHP method is considered in terms of four categories of material and energy flows. For the purpose of considering the potential environmental gains and the difficulties of this production method when applied to integrated waste management and energy production, the four suggested categories are: matter (biomass) (1), nutrients (2), energy (3) and carbon (4). Corporate environmental management inventory tools, decision-making tools, management, organisational and administrative tools as well as information management tools that could be used in CHP-related material and energy flow management are shortly discussed. It is argued that for CHP energy and environmental management, it can be important to adopt an approach to networks of firms, rather than to an individual firm. The presented material and energy flow model may contribute to assessing, planning and implementing of CHP-based waste management and cleaner energy production.     

Copper bioavailability in the rhizosphere of maize (Zea mays L.) grown in two Italian soils

In this study, potentially bioavailable copper was estimated in two soils (a fungicide polluted and a natural soil) using a passive sampling technique, DGT. As plants can alter copper mobility and bioavailability in the soil, the rhizosphere properties of Zea mays L. were investigated using rhizoboxes.

Compared to the total concentration, the soluble and the potentially bioavailable copper concentration in the bulk soils were generally low (less than 0.20% and 0.06% respectively), with a sixfold increase in the rhizosphere of the polluted soil. Our results suggest that maize cultivation in a polluted vineyard soil could increase the potentially available fraction of copper. DGTs showed a good sensitivity to soil properties and to root-induced changes in the rhizosphere, but the potentially bioavailable copper could not be related to the copper concentration in the above ground parts of maize. The results suggest that DGT may be used to predict some effects of the cultivation of polluted soils, for example, metal mobility and increased availability, but they cannot mimic the uptake of a tolerant plant.

For both soils, dissolved organic carbon (DOC) concentrations were threefold higher in the rhizosphere than in the bulk soil, whilst bioaccumulation in leaves and roots was not significant. DOC production, usually effective in ion mobilization and assimilation, may help also in the reduction of Cu uptake at toxic concentrations. The sequestration of available Cu in soil and soil solution by DOC seems to contribute to maize tolerance.