Mass conservation above slopes in the Regional Atmospheric Modelling System (RAMS)

This paper examines the mass balance in calculations with the Regional Atmospheric Modelling System (RAMS). An error is pointed out that concerns the calculation of the surface fluxes on slopes. This error affects all the prognostic variables in RAMS when sloping terrain is involved. Here we explain how the error can be corrected. To study the impact of the error, we compared simulations with the uncorrected and corrected model. The model contains CO₂ transport, and online mass balance calculations were performed for this tracer. Without correction, effective surface CO₂-fluxes on mountain slopes were found to be enhanced under certain common conditions to several times the parameterized fluxes. Neglecting this error may cause substantial deviations in both forward and inverse model calculations. After the correction a very good closure of the mass balance is obtained. The correction also modifies the meteorological parameters, although the consequences were limited compared to the CO₂-fluxes.     

长期低强度曝气技术处理黑臭水体的可行性研究

为在保持曝气复氧技术优点的同时,通过控制曝气强度以节约曝气能耗,较大幅度地降低运行成本,拓展其应用范围,提出了1种长期低强度曝气处理黑臭水体的河道复氧技术。取用上海市徐汇区新港河水为实验用水,通过长期低强度曝气与连续曝气,间歇曝气的比较实验,结果表明,低强度曝气技术消除河道黑臭是完全可行的,同时还能有效去除水体污染负荷。实验中,氨氮去除率90%以上时,低强度曝气所消耗能源仅为连续曝气的10.52%和间歇曝气的25%,可节约大量的能源。     

Reassessment of the Ocean-To-Atmosphere Flux of Carbon Monoxide

Abstract

Carbon monoxide (CO) in the surface sea waters is produced predominantly by photochemical processes, oxidized by micro-organisms and outgassed to the atmosphere. to assess carbon monoxide flux from the oceans to the atmosphere, the photochemical production and microbial oxidation of carbon monoxide in the oceanic mixed-layer was investigated during several oeanographic cruises and in the laboratory. the photoproduction rate of carbon monoxide was found to be well correlated to the concentration of dissolved organic carbon (DOC) in coastal and open ocean surface waters. Taking a global average carbon monoxide production rate of 10 ± 2 nmole litre^?1 (mg DOC hr)^?1 in the surface open ocean water, and 25 ± 7 nmole litre^?1 (mg DOC hr)^?1 in coastal sea water, at cloud-free summer solar noon, the photochemical production of carbon monoxide in the global oceans is estimated to be at a rate of 1200 ± 200 Tg CO y^?1. the microbial carbon monoxide turnover time in the mixed-layer was observed to range from hours in a coastal estuary to 16 days in the Pacific along 1057deg; W in dark incubations. Natural sunlight can largely inhibit the microbial consumption of carbon monoxide in surface water. On a global scale, microbial consumption is responsible for the loss of less than 10% of photochemical produced carbon monoxide in the surface ocean. Field measurements have shown that the net transport of carbon monoxide from the euphotic zone to the underlying deeper ocean water is limited and that the overall life time in surface sea waters is less than 3-4 hours. When combined, these field measurements with the photoproduction and microbial consumption rates obtained, we estimate the oceanic flux to the atmosphere is about 1000 ± 200 Tg CO y^?1, which represents the largest single source of atmospheric carbon monoxide.     

Life-cycle model of terrestrial carbon exchange

We present here a terrestrial carbon cycle model based on a scheme of the phytomass change, which is continuous in time. The experimental information about net primary production, living and dead phytomass, and soil organic matter for various ecosystems is used for calibration of the model. The suggested model enables to characterize terrestrial ecosystems as carbon sources or carbon sinks and to evaluate intensity of these sources and sinks. The model is applied for the European territory of Russia as a case study. Intensity of the total exchange carbon flux for this territory is evaluated. The obtained results allow to conclude that the given territory is the sink of carbon.     

Testing the resistance of single- and multi-walled carbon nanotubes to chemothermal oxidation used to isolate soots from environmental samples

Quantification of natural and engineered carbon nanotubes (CNT) in the environment is urgently needed to study their occurrence and fate and to enable a proper risk assessment. Currently, such methods are lacking. Here, we tested the resistance of 15 structurally different CNTs to chemothermal oxidation at 375 °C (CTO-375), a method used to isolate soots from environmental samples. Depending on their structure, CNTs survived CTO-375 in proportions ranging from 26 to 93%. Standard addition of CNTs to soil and sediment yielded recoveries between 66 and 171%, demonstrating the capability of CTO-375 to isolate CNTs from complex environmental matrices. These data of pure and added CNTs correspond to recoveries obtained with “ordinary” soots under similar experimental conditions. Hence, soot fractions commonly isolated with CTO-375 from environmental matrices most probably encompass CNTs. Future work should attempt to enhance the method's selectivity, i.e., its capability to separate CNTs from other forms of soot.     

A bioeconomic model of afforestation in Southern Ontario: Integration of fiber,carbon and municipal biosolids values

This study explores the economic attractiveness of afforestation as a strategy for the joint production of fibre, carbon storage and biosolids (treated municipal sewage sludge) disposal for municipalities in Southern and Central Ontario, Canada. We use a spatial, stochastic model, the Canadian Forest Service Afforestation Feasibility Model (CFS-AFM), to simulate a range of spatial biosolids application scenarios in hybrid poplar afforestation projects. Results suggest that such joint afforestation strategies could be financially attractive. Significant cost savings can be expected through decreases in transportation distances and avoided waste disposal fees. Sensitivity analysis is used to examine the effects of variations in critical model parameters on net present values. Our findings indicate that waste disposal savings from application of biosolids on hybrid poplar plantations combined with incentives for landowners to sequester carbon can easily compete with agricultural land rental values in some regions of Ontario. Social acceptance of this kind of activity, however, may be an impediment to adoption.     

Managing carbon emissions in China through building energy efficiency

This paper attempts to analyse the role of building energy efficiency (BEE) in China in addressing climate change mitigation. It provides an analysis of the current situation and future prospects for the adoption of BEE technologies in Chinese cities. It outlines the economic and institutional barriers to large-scale deployment of the sustainable, low-carbon, and even carbon-free construction techniques. Based on a comprehensive overview of energy demand characteristics and development trends driven by economic and demographic growth, different policy tools for cost-effective CO₂ emission reduction in the Chinese construction sector are described. We propose a comprehensive approach combining building design and construction, and the urban planning and building material industries, in order to drastically improve BEE during this period of rapid urban development. A coherent institutional framework needs to be established to ensure the implementation of efficiency policies. Regulatory and incentive options should be integrated into the policy portfolios of BEE to minimise the efficiency gap and to realise sizeable carbon emissions cuts in the next decades. We analyse in detail several policies and instruments, and formulate relevant policy proposals fostering low-carbon construction technology in China. Specifically, Our analysis shows that improving building energy efficiency can generate considerable carbon emissions reduction credits with competitive price under the CDM framework.     

Evaluating the potential of CNT-supported Co catalyst used for gas pollution removal in the incineration flue gas

This study investigated the use of Cu/Al₂O₃, Co/Al₂O₃, Fe/Al₂O₃, and Ni/Al₂O₃ catalysts for the growth of carbon nanotubes (CNTs). These CNTs were used as support for Co catalyst preparation and Co/CNT catalysts were applied to a catalytic reaction to remove BTEX, PAHs, SO₂, NO, and CO simultaneously in a pilot-scale incineration system. The analyzed results of EDS and XRD showed low metal content and good dispersion characteristics of the Al₂O₃-supported catalysts by excess-solution impregnation. FESEM analyzed results showed that the CNTs that were synthesized from Co, Fe, and Ni catalysts had a diameter of 20 nm, whereas those synthesized from Cu/Al₂O₃ had a diameter of 50 nm. Pilot-scale test results demonstrated that the Co/CNT catalyst effectively removed air pollutants in the catalytic reaction and that there was no obvious deactivation by Pb, water vapor, and coke deposited in the process. The thermal stabilization at 250 °C and hydrophobicity properties of CNTs enhanced the application of CNT catalysts in flue gas.     

Temporal signatures of advective versus diffusive radon transport at a geothermal zone in Central Nepal

Temporal variation of radon-222 concentration was studied at the Syabru-Bensi hot springs, located on the Main Central Thrust zone in Central Nepal. This site is characterized by several carbon dioxide discharges having maximum fluxes larger than 10 kg m⁻² d⁻¹. Radon concentration was monitored with autonomous Barasol™ probes between January 2008 and November 2009 in two small natural cavities with high CO₂ concentration and at six locations in the soil: four points having a high flux, and two background reference points. At the reference points, dominated by radon diffusion, radon concentration was stable from January to May, with mean values of 22 ± 6.9 and 37 ± 5.5 kBq m⁻³, but was affected by a large increase, of about a factor of 2 and 1.6, respectively, during the monsoon season from June to September. At the points dominated by CO₂ advection, by contrast, radon concentration showed higher mean values 39.0 ± 2.6 to 78 ± 1.4 kBq m⁻³, remarkably stable throughout the year with small long-term variation, including a possible modulation of period around 6 months. A significant difference between the diffusion dominated reference points and the advection-dominated points also emerged when studying the diurnal S₁ and semi-diurnal S₂ periodic components. At the advection-dominated points, radon concentration did not exhibit S₁ or S₂ components. At the reference points, however, the S₂ component, associated with barometric tide, could be identified during the dry season, but only when the probe was installed at shallow depth. The S₁ component, associated with thermal and possibly barometric diurnal forcing, was systematically observed, especially during monsoon season. The remarkable short-term and long-term temporal stability of the radon concentration at the advection-dominated points, which suggests a strong pressure source at depth, may be an important asset to detect possible temporal variations associated with the seismic cycle.     

A comparative study on sorption of perfluorooctane sulfonate (PFOS) by chars, ash and carbon nanotubes

Perfluorooctane sulfonate (PFOS), as one of emerging contaminants, has been attracting increasing concerns in recent years. Sorption of PFOS by maize straw- and willow-derived chars (M400 and W400), maize straw-origin ash (MA) as well as three carbon nanotubes (CNTs) was studied in this work. The sorption kinetics of PFOS by the six adsorbents was well fitted by the pseudo-second-order model. CNTs reached equilibrium in 2 h, much faster than those by chars (384 h) and ash (48 h). According to the sorption isotherms, both single-walled carbon nanotubes (SWCNT) and MA had high sorption capacities (over 700 mg g⁻¹), while the two chars had low sorption capacities (below 170 mg g⁻¹) caused by their small BET surface area. In the case of MA, due to its positively charged surface, both hydrophobic interaction and electrostatic attraction involved in the sorption, and the formation of hemi-micelles further favored the sorption. This study suggested that SWCNT and MA were effective adsorbents for PFOS removal from water. Compared to SWCNT, MA is low cost and easy to obtain, so it could be a preferred adsorbent for PFOS removal.