Historical record of black carbon in urban soils and its environmental implications

Energy use in urbanization has fundamentally changed the pattern and fluxes of carbon cycling, which has global and local environmental impacts. Here we have investigated organic carbon (OC) and black carbon (BC) in six soil profiles from two contrast zones in an ancient city (Nanjing) in China. BC in soils was widely variable, from 0.22 to 32.19 g kg⁻¹. Its average concentration in an ancient residential area (Zone 1) was, 0.91 g kg⁻¹, whereas in Zone 2, an industrial and commercial area, the figure was 8.62 g kg⁻¹. The ratio of BC/OC ranged from 0.06 to 1.29 in soil profiles, with an average of 0.29. The vertical distribution of BC in soil is suggested to reflect the history of BC formation from burning of biomass and/or fossil fuel. BC in the surface layer of soils was mainly from traffic emission (especially from diesel vehicles). In contrast, in cultural layers BC was formed from historical coal use. The contents of BC and the ratio of BC/OC may reflect different human activities and pollution sources in the contrasting urban zones. In addition, the significant correlation of heavy metals (Cu, Pb, and Zn) with BC contents in some culture layers suggests the sorption of the metals by BC or their coexistence resulted from the coal-involved smelting.     

Black layers on historical architecture

Background, aim and scope

The external surface of any building in urban polluted environment is unavoidably destined to be covered with layers that assume a grey to black colour and are generally called ‘black crusts’. These, according to standard protocols and glossary, are deteriorated surface layers of stone material; they can have variable thickness, are hard and fragile and can detach spontaneously from the substrate, which, in general, is quite decayed. Plain visual examination may lead to consider ‘black crusts’ all similar, whilst only a careful diagnostic investigation can distinguish ‘black crusts’ and the consequences of their formation on stone substrates. In this paper, various black layers on marble are studied and compared and the morphological and compositional characteristics discussed according to the related mechanisms of formation. Differences between old (hundred years) and recent crusts (30 years) are investigated and pointed out.

Materials and methods

Samples of black crusts collected from the Milan Cathedral façade (Candoglia Marble) have been studied and compared with the careful and synergic employ of traditional techniques: optical (transmission and reflected VIS light) and electron microscopy, X-ray spectrometry and micro-Fourier transform infrared spectroscopy.

Results

Visual examination of loose fragments does not allow to point out outstanding differences amongst the various samples; black layers have similar main mineral components, gypsum and airborne particles, with different spatial distribution. The microscopic studies allowed to point out the porosity differences, the gypsum crystallisation habit, different amount of embedded particles, level and progress of marble decay.

Discussion

The observations lead to define three main types of black crusts: black crust deriving from marble sulphation, compact deposit and encrustation due to exogenic materials deposition. Black crusts show evidence of sulphation in progress, without a clear continuity solution between crust and marble; the lack of separation is particularly evident in ‘recent’ crust, where the sulphation process is more active. Black compact deposits show a higher porosity than black crusts because gypsum is not coming from the chemical corrosion of the substrate but from outside; actually, in the former case, the substrate is sound. Encrustations show a highly regular crystal organisation of gypsum (close packed tabular crystals) that cannot be traced back to casual atmospheric deposit or to corrosion of the substrate but rather to the crystallisation of a solution coming from an external source. Also in this case, the marble is sound; evidence of the effect of some protection treatment is pointed out.

Conclusions

In spite of the apparent similarity of the examined samples, analytical results have evidenced three main types of black crusts: black crust with decayed substrate, compact deposit and black encrustation showing a sound substrate underneath. Experimental evidence of calcite grains sulphation in progress, taking place according to a model recently proposed, has been observed. Sulphation process is prevented where particular conservation treatments had been applied in the past.

Recommendations and perspectives

New experimental studies can be focussed to understand the specific conditions (measurements of micro-climatic and thermodynamic parameters) and mechanisms for black crusts formation in situ. The problem of the kinetic of the sulphation process of marble, the assessment of black layers formation in the case of different carbonate stone materials and the study of acid attack in presence of surface protecting layers deserve further investigation.     

Adsorption of mono- and di-butyltin by a wheat charcoal: pH effects and modeling

Understanding adsorption processes of butyltins (BTs) such as monobutyltin (MBT) and dibutyltin (DBT) by black carbons is important for the evaluation of BT exposure risks to organisms and humans. However, relevant knowledge is scarce. In this study, the acidity constants pK_a,1 = 2.3, pK_a,2 = 3.5 and pK_a,3 = 5.9 for MBT and pK_a,1 = 3.0 and pK_a,2 = 5.1 for DBT are estimated via potentiometric titration. Additionally, adsorption isotherms of BTs to a wheat charcoal were determined. The adsorption behavior was observed to be pH-dependent due to BT speciation and the pH-dependent surface charge of the charcoal. MBT adsorption to the charcoal decreases with increasing pH from 4 to 8, while the highest adsorption occurs at pH 6 for DBT. Adsorption of the BTs is successfully described in the pH range of 3-10 by using a newly developed pH-dependent Dual Langmuir model. The model has the potential to predict the interaction of BT species with charcoal, which can contribute to the risk assessments of BTs in the environment.     

丝瓜瓤固定化脱色菌Enterobactor sp.S8 对活性黑5的脱色

利用植物载体丝瓜瓤对肠杆菌(Enterobactor sp.S8)进行固定,并对活性黑5进行脱色研究.探讨了固定化菌体的菌龄、菌量、pH、温度对染料脱色的影响.研究了该固定化菌体的重复利用和动力学实验.结果表明,最佳脱色条件为:菌龄3d、接菌量2％、温度30℃、pH 6.0.该固定化菌体对不同初始浓度活性黑5的脱色符合二级反应动力学方程.经9次重复利用后的该固定化菌体,其脱色率仍达76.8％.在优化实验条件下,根据降解3d前后的紫外-可见光谱图分析可知,活性黑5并非完全被降解为CO2和H2O,而是生成一些小分子有机中间体.     

Deposition in boreal forests in relation to type, size, number and placement of collectors

Open precipitation and throughfall was collected at a Norway spruce stand in Finland using funnel-type collectors and at a black spruce stand in Canada using trough-type collectors. The presence or absence of a rim on the funnel, funnel diameter (9, 14 and 20 cm) and length of sampling period (1, 2 and 4 weeks) on monthly values were evaluated at the Norway spruce stand, and the number of collectors required for defined levels of accuracy and precision of throughfall loads to be reached and the influence of the spatial arrangement of collectors on solute concentrations was studied at both stands. The presence of a rim had no significant effect on open precipitation and throughfall amounts, but did on throughfall DOC, Ca²⁺, Mg²⁺, K⁺, Na⁺ and Cl⁻ ion loads. Deposition loads increased with decreasing funnel diameter; for open precipitation, this was due to increased catch efficiency while for throughfall the increase was attributed to canopy interaction and leaching of litter trapped in the collectors. Calculated monthly H⁺ loads decreased and those for all other constituents increased with collection period length. Using 15 collectors at the Norway spruce stand would allow throughfall loads to be determined to within 20% of the true mean weekly value with a confidence level of 95% for most solute, but not for NH₄ ⁺–N, NO₃ ⁻–N, Mg²⁺ and SO₄ ²⁻-S. Using 15 trough collectors, the same confidence level at the more heterogeneous black spruce stand would only be achieved for H⁺, Cl⁻, DOC and SO₄ ²⁻-S loads. In both stands, using either random or systematic placements of throughfall collectors gave similar results.     

The pH-dependent adsorption of tributyltin to charcoals and soot

Widespread use of tributyltin (TBT) poses a serious environmental problem. Adsorption by black carbon (BC) may strongly affect its behavior. The adsorption of TBT to well characterized soot and two charcoals with specific surface area in the range of 62-111 m² g⁻¹ have been investigated with main focus on pH effects. The charcoals but not soot possess acidic functional groups. TBT adsorption reaches maximum at pH 6-7 for charcoals, and at pH > 6 for soot. Soot has between 1.5 and 15 times higher adsorption density (0.09-1.77 μmol m⁻²) than charcoals, but charcoals show up to 17 times higher sorption affinities than soot. TBT adsorption is successfully described by a new pH-dependent dual Langmuir model considering electrostatic and hydrophobic adsorption, and pH effects on TBT speciation and BC surface charge. It is inferred that strong sorption of the TBTOH species to BC may affect TBT toxicity.     

漆酶催化复合染料酸性黑ATT脱色的研究

利用白腐菌Ganoderma lucidum wz-32发酵制备的漆酶对印染工业常用的复合染料酸性黑ATT进行催化脱色.在单因子试验的基础上,通过正交优化试验确定酸性黑ATT的最佳脱色条件为:温度50℃,染料浓度0.1 g·L-1,酶量9 U·mL-1,pH 5.0,最适条件下酸性黑ATT的脱色率达87.35%.同时研究了金属离子、酶抑制剂、脱色助剂对酸性黑ATT脱色的影响,结果表明,Co2+、Fe2+、Mn2+、Ca2+、I-对脱色有抑制作用,10mmol·L-1的浓度使脱色率降低了50%以上;Na+、Cu2+在低浓度时对脱色有一定的促进作用;SDS显著抑制漆酶的催化脱色作用,浓度为10mmol·L-1时脱色率降低了68%;HBT是高效的脱色助剂,可显著提高漆酶的脱色效率.     

Enhanced mixing state of black carbon with nitrate in single particles during haze periods in Zhengzhou, China

Black carbon（BC） plays an important role in air quality and climate change, which is closely associated with its mixing state and chemical compositions. In this work the mixing state of BC-containing single particles was investigated to explore the evolution process of ambient BC particles using a single particle aerosol mass spectrometer（SPAMS） in March 2018 in Zhengzhou, China. The BC-containing particles accounted for 61.4% of total detected ambient single particles and were classified into f...     

黑臭河道底泥特征分析及处理工艺筛选

以深圳市前海片区代表性河道黑臭底泥为研究对象,对其p H值、含水率、有机质、氮磷含量、重金属含量及粒径进行分析。结果表明,黑臭底泥主要为呈碱性的无机砂质成分,有机质含量低,重金属含量虽高但分布稳定。根据其特性,最终确定其主要处置方式为疏浚后机械脱水。     

Construction of dual Z-scheme Bi2WO6/g-C3N4/black phosphorus quantum dots composites for effective bisphenol A degradation

In this work, a novel dual Z-scheme Bi₂WO₆/g-C₃N₄/black phosphorus quantum dots (Bi₂WO₆/g-C₃N₄/BPQDs) composites were fabricated and utilized towards photocatalytic degradation of bisphenol A (BPA) under visible-light irradiation. Optimizing the content of g-C₃N₄ and BPQDs in Bi₂WO₆/g-C₃N₄/BPQDs composites to a suitable mass ratio can enhance the visible-light harvesting capacity and increase the charge separation efficiency and the transfer rate of excited-state electrons and holes, resulting in much higher photocatalytic activity for BPA degradation (95.6%, at 20 mg/L in 120 min) than that of Bi₂WO₆ (63.7%), g-C₃N₄ (25.0%), BPQDs (8.5%), and Bi₂WO₆/g-C₃N₄ (79.6%), respectively. Radical trapping experiments indicated that photogenerated holes (h⁺) and superoxide radicals (•O₂⁻) played crucial roles in photocatalytic BPA degradation. Further, the possible degradation pathway and photocatalytic mechanism was proposed by analyzing the BPA intermediates. This work also demonstrated that the Bi₂WO₆/g-C₃N₄/BPQDs as effective photocatalysts was stable and have promising potential to remove environmental contaminants from real water samples.