医疗废物焚烧厂周边环境空气中二英浓度分布及其健康风险评估

于2015-2018年冬季（12月-2月）对广东省某医疗废物焚烧厂排放烟气及焚烧设施周边2.5 km范围内6个采样点分别进行了4次烟气和环境空气样品采集,应用高分辨气相色谱/高分辨质谱（HRGC-HRMS）联用技术对二（口恶）英（PCDD/Fs）浓度水平进行监测并对其组成特征进行了分析,运用主成分分析法（PCA）对周边环境空气中二（口恶）英来源进行了初步解析,同时采用VLIER-HUMAAN模型评估其对人体的健康风险.结果表明该医疗废物焚烧厂烟气二（口恶）英毒性当量浓度为0.542~21.300 ng·Nm^-3（以I-TEQ计）,排放水平较高;周边环境空气中PCDD/Fs质量浓度和毒性当量浓度变化范围分别为0.682~196.000 pg·m^-3和0.036~17.700 pg·m^-3（以I-TEQ计）,周边环境空气中PCDD/Fs浓度明显受到排放源烟气落地点的影响.空气样品中二（口恶）英同族体及异构体分布指纹谱图与该焚烧设施排放烟气类似,空气质量浓度主要贡献单体以OCDD、1,2,3,4,6,7,8-HpCDF、OCDF以及1,2,3,4,6,7,8-HpCDD为主,主要毒性贡献单体为2,3,4,7,8-PeCDF.PCA源解析结论与指纹谱图特征分析结论基本一致,该研究区域中环境空气二（口恶）英主要来源于医疗废物焚烧烟气排放.健康风险评估结果表明,该区域人群呼吸暴露风险总体处于较为安全的水平（0.0032~0.141 pg TEQ·kg^-1·d^-1）,部分个体的呼吸暴露贡献率超过了评价限值,应引起重视.     

BiOCl/SiO2/Fe3O4复合材料可见光催化去除水中亚甲基蓝

以FeCl_3·6H_2O、FeCl_2·4H_2O、(C_2H_5)_4SiO_4、Bi(NO_3)_3·5H_2O、KCl为主要原料,采用化学共沉淀法和水热法制备了BiOCl/SiO_2/Fe_3O_4光催化剂,并对其进行EDS、TEM、XRD、FT-IR、UV-Vis表征,最后通过亚甲基蓝降解实验,研究了催化剂在合成过程中pH及催化剂投加量对其光催化性能的影响.结果表明,在pH=6、催化剂初始投加量为0.5 g·L~(-1)时,对亚甲基蓝的可见光催化效果最佳,光照120 min后对10 mg·L~(-1)的亚甲基蓝溶液的脱色率达到93.2%.BiOCl/SiO_2/Fe_3O_4经过简单的无水乙醇和水洗后,可高效重复利用4次.综合表明,BiOCl/SiO_2/Fe_3O_4是一种在处理染料废水中具有应用前景的磁性光催化剂.     

CoZn-ZIF/MgAl-LDHs制备及其对碘吸附性能的研究

通过在双金属氢氧化物MgAl-LDHs表面定向固定纳米尺度的CoZn-ZIF,并原位生长形成CoZn-ZIF/MgAl-LDHs复合材料.利用扫描电子显微镜(SEM),傅里叶变换红外光谱仪(FT-IR),X射线衍射(XRD)和热重差热综合热分析仪(TGA/DSC)分析手段对材料进行表征,考察CoZn-ZIF/MgAl-LDHs复合材料对正己烷中碘分子的吸附行为,讨论了吸附时间和吸附温度对吸附性能的影响.此外,还对吸附过程的吸附动力学和热力学进行详细的研究,考察准一级和准二级动力学模型,Langmuir和Freundlich等温吸附模型探究该材料的吸附机理.实验结果表明,CoZn-ZIF/MgAl-LDHs对碘的吸附行为符合准二级动力学模型,吸附平衡时间为225 min.通过Langmuir等温方程得到最大平衡吸附量为344.3322 mg·g~(-1),碘的吸附过程更好地拟合Freundlich等温方程,说明反应是多分子层吸附过程,同时,由热力学数据得知该吸附是以物理吸附为主的放热过程,降低温度对吸附过程更有利.     

典型污染源材料中多溴联苯醚(PBDEs)的释放

为研究以多溴联苯醚（PBDEs）为代表的含卤半挥发性有机物（SVOCs）在室内空气中的扩散特性,在对杭州室内环境（办公室、居室）空气中PDBEs14种单体浓度检测的基础上,分析比较了不同污染源材料中PBDEs的含量,测定了材料PBDEs挥发强度系数;探究了典型污染源材料中PBDEs释放的影响因素及其相关性.结果表明,杭州室内环境空气颗粒相和气相中PBDEs平均浓度为427.26和416.46pg/m³,其中颗粒相和气相中主要特征单体均为BDE-209.所选取的9种室内常用材料的PBDEs挥发强度系数大小依次为：地毯>电线>塑料板>阻燃布>电路板>防烫桌布>保温棉>自粘墙纸>绝缘胶带.对比不同材料中各PBDEs同系组的含量：绝缘胶带、塑料板、防烫桌布、阻燃布中十溴二苯醚（deca-BDEs）的占比最高,分别为81.33%、63.83%、27.3%和34.1%;电线中四溴二苯醚（tetra-BDEs）的占比最高,为29.83%;自粘墙纸、电路板、地毯、保温棉中五溴二苯醚（penta-BDEs）的占比最高,分别为35.82%、41.25%、45.75%和38.64%.典型污染源材料中PBDEs释放的影响因素实验结果表明,环境模拟舱中的PBDEs总浓度与温度和封闭时间对数均呈显著正相关,相关系数r和显著水平P分别为r=0.811,p<0.05和r=0.883,p<0.05,且封闭时间对源释放PBDEs总浓度的影响比温度稍大.同时,污染源特征因素（材料中PBDEs的固有含量与PBDEs挥发强度系数）对源释放的影响程度比环境因素（温度和封闭时间）大.     

TiO2/pg-C3N4复合催化剂的制备及光催化性能

通过简单的超声剥离分散和水热法,成功制得了具有多孔结构的TiO₂/pg-C₃N₄复合催化剂.利用XRD、SEM、TEM、UV-Vis DRS和PL对样品的形貌、结构及光学性能进行了表征.在模拟太阳光照射下,以RhB和MO为模拟污染物考察了TiO₂/pg-C₃N₄的光催化性能.结果表明：当TiO₂占pg-C₃N₄的质量分数为5%时,制得的TiO₂/pg-C₃N₄（5：100）复合催化剂具有最优的光催化性能.TiO₂/pg-C₃N₄（5：100）对RhB的光催化降解途径为O^2·-和h⁺使整个共轭发色团结构发生裂解.TiO₂/pg-C₃N₄（5：100）光催化性能的提高一方面是由于多孔结构增加了光催化反应的活性位点;另一方面是由于TiO₂与pg-C₃N₄之间形成了Z型异质结,与传统的Ⅱ型异质结相比,该复合催化剂不仅使光生载流子分离效率提高,同时保留了pg-C₃N₄导带电子的强还原性和TiO₂价带空穴的强氧化性.     

Recent advances in thin film composites membranes for brackish groundwater treatment with critical focus on Saskatchewan water sources

Drinking water scarcity is an ever-increasing global concern. This issue appears as a greater threat to the countries with no access to sea water resources or rivers, since their potential water resources are only limited to ground waters only. There are serious concerns with the treatment of ground water resources, including landfill leachates, agricultural contaminations (pesticides, herbicides, and fertilizers), and rural contaminations. Membrane separation has been proved to be the governing technology in water and wastewater treatment plants, as these methods are responsible for more than half of the market share of the world's desalination capacity. This study intends to offer a holistic view of the groundwater contamination with specific focus on Saskatchewan province in Canada, and the recent efforts in the groundwater treatment using thin film composite membrane technology. This study begins with an introduction of the general aspects of ground water and membrane separation, polluting agents, and their sources. It is followed by a discussion of Saskatchewan's groundwater status and various issues. Furthermore, the recent research that became available since 2010 is reviewed in details and the results are summarized with respect to purification efficiency. Different affecting parameters in a groundwater-thin film composite system are synthesized and an in-depth overview is presented.     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.     

温度和DO对MBBR系统硝化和反硝化的影响

在缺氧/好氧/好氧串联运行的移动床生物膜反应器（MBBR）系统中考察了温度和好氧反应器中溶解氧（DO）水平对生物膜硝化和反硝化过程氮素去除的影响,并通过高通量测序技术探究温度和DO的变化造成的MBBR系统中脱氮功能菌群结构的差异,从而在微观水平解释硝化和反硝化受温度和DO影响的生物学机理.结果表明,系统温度的升高可以同时强化生物膜硝化和反硝化过程,且好氧反应器中DO水平的提高对硝化过程有利,从而提高系统的脱氮效果.本研究中,在系统连续运行阶段,当系统温度和好氧O₁反应器的DO浓度为本研究范围内的最高水平时（即温度=20~22℃、DO=5~8mg O₂/L）,比硝化负荷可达1.60g NH₄⁺-N/（m²·d）以上,而相同温度范围内比反硝化负荷可高达2.84g NO₃^--N/（m²·d）,从而使MBBR系统在该工况条件下获得了最佳的NH₄⁺-N和TN去除率（分别达到了98.7%和85.7%）.温度和DO影响硝化和反硝化的根本原因是温度和DO变化引起了脱氮功能菌群数量和群落结构的改变：当好氧反应器的DO水平下降时,硝化功能细菌的OTUs比例显著降低,尤其是异养硝化细菌的生长受到了严重的抑制;而温度的变化对反硝化细菌的影响主要体现在群落结构的变化.     

ANAMMOX富集与优化停曝比对MBR-SNAD工艺的影响

采用膜生物反应器（MBR）研究了厌氧氨氧化细菌在富集过程中的活性变化,在启动全程自养脱氮（CANON）工艺中以恒定曝气量,通过优化停曝比实现氨氧化细菌（AerAOB）和厌氧氨氧化细菌（AnAOB）协同脱氮并且有效抑制亚硝酸盐氧化菌（NOB）的活性,然后添加有机物（乙酸钠）逐步启动同步亚硝化-厌氧氨氧化耦合异养反硝化（SNAD）工艺.结果表明,在厌氧氨氧化细菌富集过程中,通过不断缩短水力停留时间（HRT）提高进水氮负荷的方式强化厌氧氨氧化细菌活性,其平均活性由0.603mgN/（h·gVSS）提高到了8.1mgN/（h·gVSS）;当恒定曝气量为50mL/min,停曝比为4：10（min：min）时,AerAOB和AnAOB对氨氮的去除量分别占总氨氮去除量的58.8%和41.2%,NOB氧化亚硝态氮的量占总硝态氮生成量的15.3%,成功抑制了NOB的活性;当C/N比为0.5,调整停曝比为4：15后,反硝化过程氮去除量占总氮去除率的20.9%,厌氧氨氧化过程氮去除量占总氮去除率的79.1%,实现了AerAOB、AnAOB和反硝化细菌（DNB）协同脱氮的目的.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.