Effect of Al2O3 particle size reduction on aluminium dust explosion

To investigate the effect of Al₂O₃ particle size on an aluminum explosion, the overpressure and flame velocity in a vertical duct were evaluated. The results show that the inhibitory effect of submicron Al₂O₃ is best, while the inhibitory effect increases with increasing inerting ratio. However, the inhibitory effect of micron Al₂O₃ does not increase significantly after the inerting ratio exceeds 40%. For high-concentration aluminum powder, 0.8 μm Al₂O₃ with an inerting ratio less than 20% promotes aluminum explosion. As the inerting ratio increases beyond 20%, however, the overpressure decreases. Furthermore, Al₂O₃ inhibits the formation of the intermediate product AlO and decreases the flame brightness. As the inerting ratio of 0.8 μm Al₂O₃ reaches 50%, the white patches in the flame image disappear. The results of scanning electron microscopy showed that the explosion products agglomerate and some dot-like protrusions appear on the surface of the unburned aluminum particles. The inhibition mechanism was qualitatively investigated. Physical heat absorption is proven to play a limited role. Thermal radiation and chemical inhibition play a key role. The chemical effect mainly influences the surface reaction energy source.     

铜中毒引起的秀丽线虫世代间可传递的缺陷

为了研究铜中毒引起的多重生物学毒性是否具有世代间的可传递性.利用秀丽线虫的寿命、体长、后代数目、繁殖速度、运动行为和行为可塑性等参数系统性地分析了铜的多重生物学毒性及其可能的可传递特性.铜中毒导致动物寿命缩短,生长发育受到抑制,出现产卵器发育畸形,世代时间延长,后代数目降低,运动行为也发生缺陷.这些多重缺陷具有浓度依赖性.此外,铜中毒引起的这种多重生物学毒性和行为毒性是可以传递给后代的,而且,后代中一些特定的缺陷比当代更加严重,如运动行为与行为可塑性等.依据这种可传递特性可将铜中毒所导致的多重缺陷分为4个类型.结果表明,秀丽线虫铜中毒引起的多重生物学缺陷很大程度上是可以传递给后代的.     

杂色云芝漆酶和发酵液降解对苯二酚研究

测定和分析了杂色云芝漆酶和杂色云芝发酵液对对苯二酚的降解反应.通过对不同底物质量浓度下杂色云芝漆酶酶学反应动力学特征分析,求得漆酶Lac A对对苯二酚的酶反应动力学方程V=1.52Cs/(16.55 Cs)和底物抑制反应速率方程γs=1.02/(1 12.86/Cs Cs/137.17).发酵液对对苯二酚的降解反应进程符合一级反应动力学方程lnC=-kt 6,发酵液对对苯二酚的降解反应动力学基本符合Michelis-Menten酶学反应动力学方程Vf=1.77Cs/(3.63 Cs),研究表明Lac A与发酵液对对苯二酚的酶学反应动力学具有较大的相似性,也存在着底物抑制现象,其底物抑制的动力学方程为γs'=1.40/(1 5.75/Cs Cs/278.26).比较漆酶纯酶Lac A和发酵液对对苯二酚反应的Km和Vmax数值,发现杂色云芝发酵液Km较小而Vmax数值较大,说明发酵液较漆酶纯酶具有更高的底物亲和力和催化效率.     

Carbonaceous aerosols in PM10 and pollution gases in winter in Beijing

An intensive observation of organic carbon (OC) and element carbon (EC) in PM10 and gaseous materials (SO2, CO, and O3,) was conducted continuously to assess the characteristics of wintertime carbonaceous aerosols in an urban area of Beijing, China. Results showed that the averaged total carbon (TC) and PM10 concentrations in observation period are 30.2±120.4 and 172.6±198.3 μ/m3, respectively. Average OC concentration in nighttime (24.9±19.6 μ/m3) was 40% higher than that in daytime (17.7±10.9 μ/m3). Average EC concentrations in daytime (8.8±15.2 μ/m3) was close to that in nighttime (8.9±15.1 μ/m3). The OC/EC ratios in nighttime ranging from 2.4 to 2.7 are higher than that in daytime ranging from 1.9 to 2.0. The concentrations of OC, EC, PM10 were low with strong winds and high with weak winds. The OC and EC were well correlated with PM10, CO and SO2, which implies they have similar sources. OC and EC were not well correlated with O3. By considering variation of OC/EC ratios in daytime and night time, correlations between OC and O3, and meteorological condition, we speculated that OC and EC in Beijing PM10 were emitted as the primary particulate form. Emission of motor vehicle with low OC/EC ratio and coal combustion sources with high OC/EC ratio are probably the dominant sources for carbonaceous aerosols in Beijing in winter. A simple method was used to estimate the relative contribution of sources to carbonaceous aerosols in Beijing PM10. Motor vehicle source accounts for 80% and 68%, while coal combustion accounts for 20% and 32% in daytime and nighttime, respectively in Beijing. Averagely, the motor vehicle and coal combustion accounted for 74% and 26%, respectively, for carbonaceous aerosols during the observation period. It points to the motor vehicle is dominant emission for carbonaceous aerosols in Beijing PM10 in winter period, which should be paid attention to control high level of PM10 in Beijing effectively.     

亚洲地区稻田N2O排放影响因子统计模拟分析

关于稻田N2O排放大样本统计分析大多只涉及水分因子和肥料因子,本研究收集历年亚洲稻田N2O排放资料和更多影响因子(水分管理、肥料类型及用量、土壤属性、气候和水稻类型等)的相关信息,从中筛选出具有统计学意义的因子,构建排放通量和上述因子的统计模型.具有统计学意义的因子包括不同水分管理措施、肥料用量、不同有机肥类型、不同p...     

热泵蒸发及其在浓缩垃圾渗滤液中应用的初探

在热泵蒸发过程中,二次蒸汽压缩比是个至关重要的参数,它直接关系到热泵蒸发的经济程度。对热泵蒸发中的传热过程及可利用的余热作了全面分析。最后对热泵蒸发在浓缩垃圾渗滤液中的应用进行了探讨。     

油气田压裂返排液治理技术研究现状

概述了压裂的目的、压裂液以及压裂返排液的来源和和水质特征。综述了近十年来絮凝沉降法、生物及生化法、高级氧化技术和Fe/C微电解组合工艺的水处理作用原理及其在压裂返排液治理中的应用进展。分析并指出了压裂返排液处理技术中存在的问题和今后的主要发展方向。     

复合曝气生物滤池运行参数的试验研究

以宜兴市华骐污水处理厂的二级出水作为研究对象,研究碳氮比、水力负荷和气水比对复合曝气生物滤池运行的影响。研究发现,以葡萄糖作碳源,当碳氮比6:1时,滤池对总氮的去除率能达到80%以上,出水亚硝酸盐浓度很低。保持碳氮比为6,随着水力负荷的增大,滤池对总氮的去除率会有所下降,但增大到3.5 m/h时,去除率仍保持在60%以上;水力负荷对于浊度和COD的去除率影响不是很大。随着气水比的增大,好氧段对于COD的去除率呈上升趋势。     

浅谈城市排水体制的选择及建设

城市排水系统是城市重要的基础设施,是污水收集和集中处理的关键,是污水处理保护水资源和改善环境的必要手段。而排水体制的选择需要结合当地的城镇及工业企业的规划、环境保护的要求、污水利用情况、原有排水设施、水质、水量、地形、气候和水体等条件综合考虑。     

气体稳定同位素比质谱法分析本底大气CO2的δ13C和δ18O

将商用MAT253稳定同位素比质谱仪、Airtrap高效预浓缩气体捕集阱与自加工16口自动进样器集成,建立了高精度气体稳定同位素比质谱分析系统,用于程序化自动分析本底大气CO2的δ13C和δ18O.气样分析时用工作标气定量并穿插目标气测定,还定期用实验室上一级标气对工作标气和参比气进行标校,以保证分析结果的可靠和可比.结果表明,利用不同稳定同位素比范围的标气重复进样测试,发现该系统对δ13C和δ18O的分析精度分别优于0.03‰和0.06‰,能基本满足本底大气CO2的碳氧稳定同位素比分析需求和WMO/GAW质量目标.