我国城市污水处理

我国城市污水处理的现状以及当前全国城市污水厂普遍应用的污水处理工艺,在选择城市污水处理工艺时应考虑资金及土地资源方面的问题,通过开发新型高效污水处理工艺提高污水净化率和污水处理量。同时通过建立和完善城市污水处理制度,提高城市居民环保意识,污水处理走向市场化,实现社会与政府的共赢。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

论水处理工程中的节能

人们在污水处理厂的建设中对污水处理工艺的先进性、可靠性以及工程投资大小考虑较多,而对污水处理厂建成后的运营管理考虑较少,因而造成许多污水处理厂建成后由于运营成本过高而不能正常运行。从能耗角度出发,分析造成运行成本高的主要原因以及相应采取的措施。     

Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment

The 2205 duplex stainless steel (DSS) is of both good properties austenitic steel and ferritic steel, which applies to the shipbuilding industry usually. In this paper, the OM, XRD and microhardness test methods are used to analyze the variation of submerged arc welded (SAW) joints with and without post weld heat treatment (PWHT). The research results show that the σ phase disappear in the fusion edge zone near heat affect zone (HAZ) and an increase in the welded center zone during the follow-up PWHT, while the amount of γ phase is decreased in the welded center zone with PWHT. A segregation distribution of some second phases is also found in the welded center zone after PWHT. There have two pick values of microhardness arise in the fusion edge zone and the welded center zone separately without PWHT. However, a maximum value of microhardness at the fusion edge zone near HAZ is disappeared and the other is still held at the welded center zone during PWHT. It can be attributed to the changes of second phases, element diffusions and particle segregation during PWHT. A developing mechanism is issued to demonstrate the second phases transferring of the 2205 DSS SAW joints by PWHT.     

基于大型乙烯成套装置工艺安全的变更管理

介绍了工艺安全变更管理的概念及相关标准法规,结合国内变更管理的现状,提出了大型乙烯成套装置工艺安全变更管理建议。     

碱改性净水污泥对水中氨氮的吸附效能研究

采用氢氧化钠浸渍法改性净水污泥,研究了碱改性净水污泥对水中NH+4的去除性能.同时,考察了模拟废水pH、吸附剂投加量、NH+4初始浓度、吸附温度及吸附时间对吸附性能的影响.结果表明,当pH为弱酸性或中性,投加碱改性净水污泥20 g·L-1时,在室温下对初始浓度为50 mg·L-1的NH+4模拟废水振荡吸附120 min,可达到氨氮排放二级标准.将实验数据分别用吸附等温模型和动力学模型进行拟合,发现净水污泥对NH+4的吸附符合Langmuir模型和二级动力学模型,且净水污泥对氨氮的吸附包括静电吸引和离子交换两种作用机理.     

石化企业苯类物质非密闭操作过程的职业暴露分析

采用职业卫生学调查和职业暴露风险评估方法,对选定的苯类物质非密闭操作过程较集中的芳烃装置进行职业暴露分析和评估,为石化企业苯类物质的健康风险控制提供依据。     

某麦芽生产厂废水管理与处理实践研究

麦芽生产过程包括清选、浸麦、发芽、烘干以及除根等工序,废水主要来自于浸麦、发芽等工序。某麦芽生产厂根据麦芽过程用水和废水产生的特点,采用设备改进、加强工艺管理、用水管理、废水回用、提高员工技能等措施,通过源头削减和生产全过程控制,合理调节生产用水,降低生产用水量和废水产生量,麦芽生产水耗指标为2.4 m3水/吨麦芽。麦芽废水采用SBR工艺进行处理,出水水质满足排放标准要求。该麦芽企业废水管理和处理经验为同行业提供了较好的案例。     

电化学法处理工业废水的现状与发展研究

随着工业的快速发展,如何对工业废水进行高效处理是我们需要解决的问题。电化学方法反应装置简单,反应效率高,不会产生二次污染。对中国工业废水目前常用的电化学处理技术的进展和应用进行了综述,包括电化学氧化、电化学还原、电絮凝、电渗析等内容,对国内外的研究成果的总结可知,电化学法对工业废水的处理效率较高,有一定的应用前景。同时对电化学法将来的重点研究方向提出了展望。     

壳聚糖絮凝机理及絮凝性能的影响因素分析

壳聚糖是一种天然高分子聚合物,被广泛地作为絮凝剂用于水处理过程。探讨了壳聚糖的三种絮凝机理。在水处理中,其絮凝性能的发挥受到pH值、壳聚糖的投加量、壳聚糖的分子量以及壳聚糖的脱乙酰度等因素的影响。