长春城市水体夏秋季温室气体排放特征

为掌握我国东北地区城市湖泊水体温室气体的释放/吸收特征,本研究分别于夏季和秋季,对位于吉林省长春市的7个城市湖泊(南湖、北湖、雁鸣湖、胜利公园、地理所内湖、天嘉公园和长春公园)表层水中的CO_2和CH_4分压[p(CO_2)和p(CH_4)]进行了监测,并对影响p(CO_2)和p(CH_4)季节变化的相关环境和水质参数进行了分析.研究结果表明在夏季和秋季这7个城市湖泊表层水体中CH_4都处于过饱和状态;除夏季的南湖和胜利公园内湖,其它湖泊CO_2也都处于过饱和状态,且不同湖泊间的温室气体分压具有显著性差异(P0.05),通量也同样具有显著性差异(P0.05).除了南湖和胜利公园内湖外,其它各湖泊在夏秋季节都是大气CO_2和CH_4的"源",且对大气中温室气体的贡献都以CO_2为主.环境参数与p(CO_2)或p(CH_4)之间的相关性分析表明,在夏季,城市湖泊表层水体中p(CO_2)和p(CH_4)都与日照时数呈显著负相关(r_(p(CO_2))=-0.48,P0.05;r_(p(CH_4))=-0.63,P0.01),日照时数通过影响水生植物的光合作用进而影响水体中CO_2和溶解氧浓度,p(CH_4)还与降水量呈显著正相关(r_(p(CH_4))=0.44,P0.05);在秋季,p(CO_2)与气温呈显著负相关(r_(p(CO_2))=-0.39,P0.05).另外,水质参数与p(CO_2)和p(CH_4)的相关性分析表明,这些城市湖泊表层水体的p(CO_2)和p(CH_4)都与水体pH显著负相关(r_(p(CO_2))=-0.51,r_(p(CH_4))=-0.82,P0.01),与盐度显著正相关(r_(p(CO_2))=0.38,P0.05;r_(p(CH_4))=0.75,P0.01),p(CH_4)还与水体DOC、TN和TP均具有显著相关性(P0.01).从研究结果可以推测在这7个富营养城市湖泊中,水体的营养物水平及其所决定的浮游植物生物量并不是影响表层水体p(CO_2)的最主要因素,而日照时数、水体pH和盐度与夏秋季表层水体中的p(CO_2)和p(CH_4)有较大关联.     

氨氮在饮用水生物滤池内的去除机制

为探讨饮用水生物滤池对NH4+-N的去除机制,测定生物滤池进出水中NH4+-N、NO2--N、NO3--N、高锰酸盐指数、总磷、单质氮(N2)、温度和溶解氧(dissolved oxygen,DO)等指标,并采集生物滤池不同层高(0、10、20、40、60 cm)活性炭生物填料,应用分子生物学技术,对样品中的细菌种群进行研究.结果表明,根据进水NH4+-N浓度分为3个阶段,第一、二和三阶段都发生了"氮亏损"现象(出水无机氮之和小于进水无机氮之和),氮亏损的量(出水无机氮之和与进水无机氮之和的差值)分别为0.94、0.32和0.15 mg.L-1.氮亏损的量与进水中NH4+-N浓度有很好的正相关性,但与进水中高锰酸盐指数浓度没有线性关系.第一阶段水中N2的平均浓度随着生物滤池填料层高呈上升趋势,进水中N2平均浓度是14.04 mg.L-1,出水N2平均浓度为14.67 mg.L-1.测序结果显示活性炭上生物膜中氨氧化细菌(ammonia-oxidizing bacteria,AOB)全部归为3个常见属:Nitrosococcus、Nitrosomonas和Nitrosospira.当生物滤池进水NH4+-N浓度较高时,生物滤池中发生的"氮亏损"现象是由AOB的作用.     

Na_3PO_4-粉煤灰胶结材组合工艺处理垃圾焚烧飞灰

垃圾焚烧飞灰由于重金属含量高,被认为是危险废物,必须要加以稳定化处理。Na3PO4-粉煤灰组合工艺被用来稳定-固化焚烧飞灰中的重金属。结果表明,Na3PO4稳定-粉煤灰胶结材固化组合处理飞灰降低重金属浸出浓度明显,1.5%Na3PO4,25%掺量的粉煤灰胶结材固化飞灰后,养护7 d即可满足填埋标准。     

Performance of CH4MOD wetland for the case study of different regions of natural Chinese wetland

Reliable national estimates of CH₄ emissions from natural wetlands depend on model validation based on site observations. We therefore evaluated the performance of the CH4MOD_wetland model in simulating CH₄ emissions from 11 representative wetland sites in five regions of China. Model performance analysis showed that this method effectively simulates differences in the CH₄ fluxes between different sites and regions. The model efficiency for estimating the daily CH₄ fluxes in the northeastern China (NE), Inner Mongolia and northwestern China (NW), the North China plain and the Middle-Lower Yangtze Plain (E) and the Qinghai Tibetan Plateau (SW) was 0.51, 0.20, 0.52 and 0.65, respectively. The efficiency for estimating the annual mean CH₄ fluxes in southern China (S) was 0.99. Systematic negative deviation between the simulated and observed CH₄ emissions existed in all regions, especially in the NW region, which had a mean deviation (RMD) value of − 36.7%. On the national scale, the root mean square error (RMSE), the RMD, the model efficiency (EF) between the simulated and observed seasonal values were 28.7%, − 7.8% and 0.93, respectively. The CH₄ emissions showed the highest sensitivity to air temperature in the NE and SW regions, and to water table depth in the E region. Based on the sensitivity analysis, future climate warming and wetting are likely to increase the wetland CH₄ emissions at different levels in all regions of China.     

杀菌剂对湖泊水体温室气体浓度分析的影响

通过往湖泊水样中添加杀菌剂(CuSO4和HgCl2),利用平衡法,用气相色谱仪测定CO2、CH4、N2O浓度,研究杀菌剂(CuSO4和HgCl2)添加对湖泊水体CO2、CH4、N2O浓度分析的影响.实验设计:对照组(CK)不加任何试剂;处理组T1加1mL CuSO4溶液,T2加5 mL CuSO4溶液,T3加0.5 mL HgCl2溶液;每组的水样分两批分析:(Ⅰ)预处理完成后立即分析和(Ⅱ)预处理完成后静置两天再分析.结果表明,CuSO4和HgCl2的添加均能明显增加水体中CO2的浓度,CK(Ⅰ)和CK(Ⅱ)的CO2平均浓度分别为(11.5±1.47)μmol·L-1和(14.38±1.59)μmol·L-1,T1(Ⅰ)和T1(Ⅱ)的CO2平均浓度分别为(376±70)μmol·L-1和(448±246.83)μmol·L-1;T2(Ⅰ)和T2(Ⅱ)的CO2平均浓度分别为(885±51.53)μmol·L-1和(988.83±101.96)μmol·L-1;T3(Ⅰ)和T3(Ⅱ)的CO2平均浓度分别为(287.19±30.01)μmol·L-1和(331.33±22.06)μmol·L-1.但CuSO4和HgCl2添加对水体中CH4和N2O的浓度没有影响.对比Ⅰ和Ⅱ的实验结果可知,在水样预处理完成后需当天分析其温室气体(CO2、CH4、N2O)浓度.本研究表明,杀菌剂的添加能显著增加水体CO2的浓度.     

基于FY-4A卫星数据反演气溶胶光学厚度及分析应用

风云四号A星（FY-4A）是我国新一代静止气象卫星,多通道扫描成像辐射计（AGRI）是风云四号静止气象卫星的主要载荷之一.为探究FY4A数据用于气溶胶光学厚度（AOD）反演的可行性,基于FY-4A/AGRI数据,利用暗像元算法对2019年2月23~26日及10月27~30日京津冀地区AOD进行反演研究,并与AERONET地基观测AOD数据进行了对比分析.结果表明,基于FY-4A数据及构建响应函数库,通过暗像元方法能较好的反演出京津冀地区气溶胶空间分布;AOD主要的高值区体现在京津冀中南部地区并向周边郊区逐渐降低,在AOD值较大时此特征较为明显;将反演值与同期AERONET地基观测数据对比验证,相关系数达到0.869,均方根误差为0.221,表明AOD反演值与观测值吻合较好,FY-4A卫星数据反演AOD具有一定可行性.     

Organic micro-pollutant removal in liquid-phase using carbonized silk cotton hull

Phenolic compounds constitute one of the major pollutants in the modern world. Although many physical and chemical treatment technologies for their removal exist, most of them are economically not feasible. The present study was aimed at using silk cotton hull, a potent agricultural waste as an adsobent for removal of 2,4-dichlorophenol (2,4-DCP), which was used as a model phenolic compound. The process parameters were investigated and optimized conditions were determined. The equilibrium time was found to ...     

Oxidation of diesel soot on binary oxide CuCr(Co)-based monoliths

Binary oxide systems (CuCr₂O₄, CuCo₂O₄), deposited onto cordierite monoliths of honeycomb structure with a second support (finely dispersed Al₂O₃), were prepared as filters for catalytic combustion of diesel soot using internal combustion engine's gas exhausts (O₂, NO_x, H₂O, CO₂) and O³ as oxidizing agents. It is shown that the second support increases soot capacity of aforementioned filters, and causes dispersion of the particles of spinel phases as active components enhancing thereby catalyst activity and selectivity of soot combustion to CO₂. Oxidants used can be arranged with reference to decreasing their activity in a following series: O₃ >> NO₂ > H₂O > NO > O₂ > CO₂. Ozone proved to be the most efficient oxidizing agent: the diesel soot combustion by O₃ occurs intensively (in the presence of copper chromite based catalyst) even at closing to ambient temperatures. Results obtained give a basis for the conclusion that using a catalytic coating on soot filters in the form of aforementioned binary oxide systems and ozone as the initiator of the oxidation processes is a promising approach in solving the problem of comprehensive purification of automotive exhaust gases at relatively low temperatures, known as the "cold start" problem.     

硫酸铜对亚硫酸钠除氧性能的影响

研究了Na2 SO3的除氧性能与特点 ,讨论了 pH值、水的温度、Na2 SO3的过剩以及添加剂CuSO4 对Na2 SO3除氧性能的影响。实验结果表明 :单独使用Na2 SO3除氧 ,除氧率最高 ,仅能达到 90 % ,而且Na2 SO3的用量过大 ,对水泵有负面的影响。pH值约在 5到 9之间除氧效果较好 ,水温越高 ,除氧效果越好。CuSO4 的添加能够明显提高Na2 SO3的除氧性能 ,且降低Na2 SO3的使用量。当Na2 SO3的加入量是理论加入量约为 6.0mg/L ,CuSO4 的加入量为 2 .0mg/L时 ,除氧率大于99 .5 % ,且pH值在 7～ 11之间 ,除氧率变化很小