生活垃圾与危险废物焚烧二噁英类排放特征研究

对某省52家焚烧企业(21家生活垃圾和31家危险废物)排放烟气数据进行了分析,结果表明,两类焚烧企业二噁英类17种单体分布有所不同,生活垃圾焚烧烟气中浓度较高的是O8CDD和O8CDF;危险废物焚烧烟气中较大的是2,3,4,7,8-P5CDF、2,3,7,8-T4CDD和1,2,3,7,8-P5CDD;两类焚烧企业二噁英类单体对I-TEQ贡献最高的都是2,3,4,7,8-P5CDF,贡献率分别为0. 7%～45%和10%～67%;两者的17种二噁英类与I-TEQ的相关性分析表明,1,2,3,7,8-P5CDF在2类焚烧炉中与I-TEQ均存在较高的相关性,其相关系数分别0. 932和0. 927,可以作为潜在的测定指示物。     

城市能源利用与环境保护的综合管理初探

能源短缺和环境污染已成为中国推行全面协调可持续发展的重要制约因素,作为能源消耗的主体和环境污染的控制重点,在城市层面推动能源发展战略的转变和强化环境保护是发展的基本要求.鉴于能源与环境之间的高度关联性,在管理方面要求对能源发展和环境保护进行统筹考虑和综合管理,充分强调能源经济效率和环境制约因素在能源发展中的作用.通过制定合理的产业能效标准和排放绩效标准,为城市经济、能源和环境的可持续性发展提供科学性、系统性决策支持.     

"十一五"脱硫计划实施前后长三角地区的硫沉降变化

采用RAINS ASIA模型研究了"十一五"期间长三角地区实施脱硫措施前后硫沉降超临界负荷的变化.结果表明,在90%保证率下,长三角地区硫沉降的临界负荷(以S计,下同)总值为78.38万t/a;2005年该地区硫沉降的超临界负荷总值为27.98万t/a,有45.6%区域面积的硫沉降超过临界负荷;如果不实施脱硫措施,到2010年长三角地区硫沉降超临界负荷的情景将急剧恶化,硫沉降超临界负荷总值将增长18.4%,超临界负荷的区域面积将增加到48.7%;"十一五"脱硫计划如期实施后,2010年长三角地区硫沉降超临界负荷总值将在2005年的基础上下降27.4%,但仍有39.1%的区域面积超过临界负荷,须采取更严格的措施控制硫沉降量.     

(汍)汊湖水体和表层沉积物中有机氯农药分布特征

用GC/ECD内标法定量测定了(汍)汉湖水体和表层沉积物中的有机氯农药(OCPs).(汍)汊湖水样和表层沉积物中20种OCPs均有检出.表层沉积物上层中(0～2 cm)的OCPs明显高于下层(2～10 cm),这是(汍)汉湖具有稳定的水动力条件所致.氯丹在表层沉积物中浓度最高,与该化合物在环境中的强稳定性以及在该地区的大量使用有关.表层沉积物样品DCHsO2上层OCPs中o,p'-DDT主要成分,表明近期可能有新的DDTs,特别是含大量o,p'-DDT的三氯杀螨醇的使用.DDD/DDE则显示表层沉积物上层DDTs的降解主要处在厌氧条件下,而下层处在好氧条件下.     

河南双河油泥在生物降解过程中饱和烃污染物的组成与分布

分析了河南双河油泥在微生物降解过程中烷烃的组成与分布特征,结果表明,XT-4、F-2、C-2、A-1和AB-1菌的混合菌对饱和烃组分有好的降解效果:当饱和烃含量在60~70g/kg范围时,经过120d的降解,饱和烃降解率达到66.4%,随着降解的进行,正构烷烃分布由单峰形变成了双峰形;萜烷类抗微生物降解能力强,在本实验条件下,其组成与分布没有发生显著变化。微生物对烷烃类化合物易降解顺序为:正构烷烃>类异戊二烯烃>藿烷类,C21以前的正构烷烃>C22以后的正构烷烃,姥鲛烷>植烷,Tm>Ts,藿烷>莫烷。     

关于室内装修有害气体烘焙排风稀释技术数值研究

依据实测数据,应用数值计算手法,对烘焙排风稀释技术不同工况下总挥发性有机化合物的排除量、烘焙排风稀释阶段室内空气中总挥发性有机化合物的浓度变化进行计算并讨论烘焙温度、换气次数对去除效果的影响。     

秦皇岛市重点工业企业VOCs排放及分布特征

工业企业挥发性有机物(VOCs)污染排放对大气环境影响日益突出,工业源VOCs污染防治成为环境保护的重点工作。为进一步提高秦皇岛市工业源挥发性有机物(VOCs)治理的科学性、针对性和有效性,对2019年秦皇岛市重点排污企业VOCs的排污量、区域分布、排放行业等进行了详细调查分析:秦皇岛市重点工业源VOCs排放总量为6875.83t,排放量最大的区域是秦皇岛经济技术开发区,占比51.1%;排放量最大的行业是交通运输设备制造业,占总排放量的33.5%;溶剂使用源的排放量最大,占比52.3%。     

Sulfur cycle as an electron mediator between carbon and nitrate in a constructed wetland microcosm

• Fe(III) accepted the most electrons from organics, followed by NO₃^‒, SO₄^2‒, and O₂. • The electrons accepted by SO₄^2‒ could be stored in the solid AVS, FeS₂-S, and S⁰. • The autotrophic denitrification driven by solid S had two-phase characteristics. • A conceptual model involving electron acceptance, storage, and donation was built. • S cycle transferred electrons between organics and NO₃^‒ with an efficiency of 15%. A constructed wetland microcosm was employed to investigate the sulfur cycle-mediated electron transfer between carbon and nitrate. Sulfate accepted electrons from organics at the average rate of 0.84 mol/(m³·d) through sulfate reduction, which accounted for 20.0% of the electron input rate. The remainder of the electrons derived from organics were accepted by dissolved oxygen (2.6%), nitrate (26.8%), and iron(III) (39.9%). The sulfide produced from sulfate reduction was transformed into acid-volatile sulfide, pyrite, and elemental sulfur, which were deposited in the substratum, storing electrons in the microcosm at the average rate of 0.52 mol/(m³·d). In the presence of nitrate, the acid-volatile and elemental sulfur were oxidized to sulfate, donating electrons at the average rate of 0.14 mol/(m³·d) and driving autotrophic denitrification at the average rate of 0.30 g N/(m³·d). The overall electron transfer efficiency of the sulfur cycle for autotrophic denitrification was 15.3%. A mass balance assessment indicated that approximately 50% of the input sulfur was discharged from the microcosm, and the remainder was removed through deposition (49%) and plant uptake (1%). Dominant sulfate-reducing (i.e., Desulfovirga, Desulforhopalus, Desulfatitalea, and Desulfatirhabdium) and sulfur-oxidizing bacteria (i.e., Thiohalobacter, Thiobacillus, Sulfuritalea, and Sulfurisoma), which jointly fulfilled a sustainable sulfur cycle, were identified. These results improved understanding of electron transfers among carbon, nitrogen, and sulfur cycles in constructed wetlands, and are of engineering significance.     

Carbon trading thickness and market efficiency in a socialist market economy

Unlike the European Union emission trade system (EU ETS), China’s pilot ETSs implemented diversified policy designs instead of using a uniform framework. Variance ratio test is used to evaluate the Efficient Market Hypothesis (EMH) in China’s carbon trading markets. The results of two versions of variance ratio tests indicate that the carbon trading market in Hubei is considered weak form efficient, and the socialist market economy does not necessarily lead to market inefficiency in carbon trading markets. Thin trading activities generate market frictions and bias the Efficient Market Hypothesis (EMH) tests.     

Distributions of radionuclide sorption coefficients (Kd) in sub-surface sediments and the implications for transport calculations

The effect of the spatial variability of K_d on calculations of contaminant travel time in the vadose zone was determined. Depth discrete measurements of K_d were made for a suite of radionuclides (¹⁰⁹Cd, ⁵⁷Co, ⁶⁰Co, ⁸⁵Sr, ¹³⁷Cs, and ⁸⁸Y) utilizing a sediment core from the E-Area at the Savannah River Site. The K_d’s were ordered as ⁸⁵Sr²⁺ < ¹³⁷Cs⁺ < ¹⁰⁹Cd²⁺ < ⁵⁷Co²⁺ = ⁶⁰Co²⁺ << ⁸⁸Y³⁺ and the values generally fell below or near the lowest quartile of values reported in the literature. Correlations were generally weak between soil properties and K_d values. Most importantly, all of the K_d distributions could be reasonably approximated as log-normal. Deterministic and stochastic calculations of contaminant travel time to the water table were made. The deterministic calculations were based on each of three conceptual models of the vadose zone: complete stratification (17 strata, each with a different K_d), two strata (two sections of the vadose zone, each characterized by a single, average K_d), and unstratified (a single zone with an average K_d). Stochastic calculations were based on log-normal fits to the K_d data. The two strata model generally yielded travel times 2× greater than those in the completely stratified model. The unstratified model yielded travel times that were between 3 and 5 times greater than the completely stratified model. The stochastic mean travel times were comparable to those of the two strata model.