Bamboo charcoal addition enhanced the nitrogen removal of anammox granular sludge with COD: Performance, physicochemical characteristics and microbial community

The effects of different chemical oxygen demand(COD) concentrations on the anammox granular sludge with Bamboo Charcoal(BC) addition were evaluated in UASB reactor. The results showed that the average total nitrogen(TN) removal efficiency was reduced from85.9% to 81.4% when COD concentration was increased from 50 to 150 mg/L. However, the TN removal efficiency of BC addition reactors was dramatically 3.1%–6.4% higher than that without BC under different COD concentrations. The average diameter o...     

生物铁法去除维生素B1生产废水中COD的试验研究

生物铁法是一种新型的强化活性污泥法,处理高浓度、难生物降解维生素B1生产废水具有很大的优势.当进水COD浓度维持在8000 mg/L时,COD的去除率可达94%以上,比普通活性污泥法高出9.7%.生物铁法污泥絮凝沉淀效果好,能保证系统有较高浓度的回流污泥,从而使曝气池的污泥浓度得到提高,COD的去除率也会相应地提高.     

以MnSO4作催化剂快速测定水中COD

建立了酸性条件下,以MnSO4代替Ag2SO4作催化剂快速测定水中COD的方法.考察了K2Cr2O7用量、MnSO4用量、H2SO4浓度、消解温度、消解时间等因素的影响,确定了最佳试验条件和最佳测定范围.方法精密度和准确度均能满足测定要求,与重铬酸钾法作对比试验,测定结果基本一致.     

微波消解-ICP-OES法测定蔬菜中的镉

采用微波消解-ICP-OES法测定蔬菜中的镉,选择了最佳微波消解条件,确定了分析线.方法检出限为0.002 μg/L,相对标准偏差为1.1%,加标回收率为100%～104%,与干灰化法作对照试验,测定结果经t检验无显著差异.     

模拟评价亚硝化-厌氧氨氧化生物膜工艺中氧的消耗

前期模拟研究显示,溶解氧是控制亚硝化-厌氧氨氧化生物膜工艺的关键因子.因此,作为一个设计参数,曝气量在工程上便显得尤为重要.生物膜工艺曝气量取决于发生在生物膜内各种反应(硝化、常规反硝化及厌氧氨氧化)的耗氧与氧补偿以及生物膜的厚度等.由于在生物膜内存在着基质扩散梯度,所以,通过试验方法确定净耗氧量十分困难,甚至难以实现.正因如此,数学模拟技术被用来评价这一在工艺设计和运行管理中具有实际意义的问题.模拟试验结果显示,不同的工艺及生物膜参数会导致不同的耗氧曲线.这些信息有助于亚硝化-厌氧氨氧化生物膜工艺的设计及运行.     

炼油污水的处理

采用接触氧化—曝气生物滤池—加氯氧化—砂滤—活性炭吸附的工艺对某炼油厂污水进行处理,运行结果显示:出水中石油类和SS均小于5mg/L,达到了设计回用指标;而对COD和氨氮的降解则存在不稳定现象,针对此问题作了进一步的工艺整改后此工艺最终出水可以达到该厂制定的回用水质标准。     

Electrocoagulation of vegetable oil refinery wastewater using aluminum electrodes

Electrocoagulation with aluminum electrodes was used to treat the vegetable oil refinery wastewater (VORW) in a batch reactor. The effects of operating parameters such as pH, current density, PAC (poly aluminum chloride) dosage and Na(2)SO(4) dosage on the removal of organics and COD removal efficiency have been investigated. It has been shown that the removal efficiency of COD increased with the increasing applied current density and increasing PAC and Na(2)SO(4) dosage and the most effective removal capacity was achieved at the pH 7. The results indicate that electrocoagulation is very efficient and able to achieve 98.9% COD removal in 90 min at 35 mAcm(-2) with a specific electrical energy consumption of 42 kWh(kgCOD(removed))(-1). The effluent was very clear and its quality exceeded the direct discharge standard.     

An integrated model for technology forecasting to reduce pollutant emission in China's pulp industry

The Chinese government has been implementing a strict pollutants gross control policy during the 11th Five Year Plan period. Primary pollutants reduction (COD & SO₂) is one of the major concerns of industrial environmental management. This paper constructs a technology selection model for industrial pollutants reduction by incorporating mass flow analysis of the production system, bottom-up modeling methodology, and linear programming for optimizing annualized discounted cost. A case study of COD emission control is carried out on the Chinese pulp industry, the nation's leading source of industrial COD discharge. The model is used to generate and analyze the technology prospects and COD emission situations under various scenarios for 2010, 2020 and 2030.     

岷江水环境容量研究

本文首先论述了国内外对水环境容量的研究现状以及对岷江流域水环境容量研究的意义。接着根据已有资料对岷江现状进行评价,选定COD为岷江污染物主要控制性指标,确定水环境容量研究的各主要参数,建立进行计算的数学模型。根据COD的水环境容量,进行水容量迭标分析,从而提出COD的削减目标。本研究为有效确定控制岷江水体污染,科学保护岷江水资源,促进岷江流域水资源、水环境与经济社会的协调发展提供合理的科学依据。     

炼油厂污水处理工艺技术的研究

文章阐述了辽河油田黄金带炼油厂废水处理现状,简要介绍了活性污泥好氧生化处理工艺,分析了污水处理技术改造的原因和必要性,根据稠油加工过程中产生污水水质的特性,如何对原有污水处理工艺技术进行研究和改进。介绍了改造后的A/O生物膜法处理工艺的技术特点,处理结果表明:化学需氧量等污染物排放浓度大幅降低,污水排放各项指标均符合DB 21/1627-2008《辽宁省污水综合排放标准》的要求。