吸附-降解组合生物系统处理含铜离子城市污水

采用Pseudomonas putida 5-x细胞为吸附剂的生物吸附过程组合SBR生物降解系统处理含铜离子城市废水.研究了生物吸附剂Pseudomonas putida 5-x细胞的最佳制备条件以及组合系统的运行过程.实验结果表明,在优化的条件下,Pseudomonas putida 5-x细胞对铜离子的吸附容量可达87.3mg·g^-1,经生物吸附处理后,污水中Cu²⁺的含量显著降低,尽管残留的Cu²⁺对活性污泥吸附COD的能力尚有一定影响,但已不影响SBR系统对废水中COD的去除效果.研究表明,在活性污泥法处理含铜离子废水前,采用生物吸附技术降低废水中Cu²⁺含量,有利于提高后续活性污泥过程对COD的去除能力.     

The removal of lignin and phenol from paper mill effluents by electrocoagulation

This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5min). It was observed that the experiments carried out at 12V, an electrolysis time of 2min and a current intensity of 77.13mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.     

化学需氧量在造纸废水中分布规律及采样点位的优化

目前对造纸废水的监测通常采取随机取样,很少考虑污染物在废水中的分布情况,所以取得的样品很难反映污染物的实际排放情况。为此,通过对某造纸厂排废废水中化学需氧量分布夫妻及采样点位的优化研究。     

Diffusion pollution from livestock and poultry rearing in the Yangtze Delta,China

BACKGROUND: The Yangtze Delta is one of the most developed regions in China and includes Shanghai, eight cities in Jiangsu province and eight cities in Zhejiang province. Meat consumption in this region has increased with economic growth, and most of the consumed meat is produced locally. The water quality of surface waters has deteriorated in recent years. An example was the huge blue-green algae bloom in Tai Lake in late May 2007, which affected millions of people's daily drinking water. However, animal husbandry is considered to be one of the main pollution sources. METHODS: Pollutants (NH3-N, total phosphorus (TP), and total nitrogen (TN)) excreted by livestock and poultry, and the resultant COD (chemical oxygen demand) and BOD (biochemical oxygen demand), were estimated using two different methods based on different data sets. RESULTS: The number of livestock and poultry has remained stable in the Yangtze Delta over the four years from 1999 to 2002, with the average number of pigs, cattle, sheep and poultry being 21.1 M, 0.4 M, 7.7 M and 597.6 M, respectively. Pollutants in livestock and poultry excreta estimated by Method I were: 0.12 Mt NH3-N, 0.11 Mt TP and 0.29 Mt TN, resulting in COD and BOD of 1.34 Mt and 1.30 Mt, respectively, while the estimations based on Method II were: 0.18 Mt NH3-N, 0.15 Mt TP and 0.40 Mt TN, resulting in COD and BOD of 1.95 Mt and 1.80 Mt, respectively. DISCUSSION: Pollutants excreted annually by livestock and poultry in the Yangtze Delta are estimated to be: 0.17 Mt NH3-N, 0.16 Mt TP and 0.42 Mt TN, giving rise to a COD of 1.86 Mt and a BOD of 1.72 Mt. Approximately 25% of this pollution was estimated to enter water bodies, which means that the annual pollutant load is 43,700 t NH3-N, 39,400 tTP, 104,600t TN with a COD of 465,000 tand a BOD of 430,100 t. Pollutants from animal husbandry were similar in magnitude to those from industrial wastewater. Pigs produced the most pollution, followed by poultry, cattle and sheep. The pollution load from animal husbandry in the Yangtze Delta is about twice the average level of the whole of China. CONCLUSIONS: Domestic wastewater was the main pollution source in the Yangtze Delta, followed by pollution from raising livestock and poultry and from industrial wastewater. The pollution load in Shanghai and Jiaxing were the greatest, followed by 7 cities of Jiangsu province (except Suzhou) and other cities of Zhejiang province and Suzhou. Pigs and poultry produced about 90% of the total pollutants from animal husbandry. RECOMMENDATIONS AND PERSPECTIVES: The local governments, especially in Shanghai and Jiaxing, should focus their attention on the pollution produced by livestock and poulrry. Controlling pollution from pigs and poultry will have the greatest impact in this region. Control of pollution will be facilitated by the development of large-scale livestock and poultry farming units and a shift away from small scale husbandry.     

不同加碱量下爆破制浆的源强试验研究

为了解爆破制浆的排污情况和废水处理的可行性,以烧碱和石灰作投加药剂,进行了不同加碱量条件下爆破制浆产生源强的试验研究,以确定最佳的加碱量和适宜的黑液提取率.研究表明,在加碱量相同的情况下,采用常规爆破浆样,浆样性能较好;在保持吨粗干浆产生的COD一致时,投加价格低廉的石灰,既能降低生产成本,又便于后续的废水处理;工程调试运行结果表明,控制吨粗干浆的石灰投加量为25～30 kg时,黑液提取率超过80%,最终出水COD<100 mg/L.     

聚硅酸氯化铝处理皂素废水的研究

制备了聚硅酸氯化铝(PASC)絮凝剂,并用其进行了皂素废水处理实验。考察了絮凝剂投加量、pH值、搅拌速度对COD和浊度去除率的影响。结果表明,当絮凝剂投加量为9～13.5 mg/L、pH值5～7、搅拌速度150～250 r/min时,COD和浊度去除效果较好。最佳工艺条件为：絮凝剂投加量11.25 mg/L、pH值6、搅拌速度200 r/min。此时,COD去除率为93.7％,浊度去除率为97.5％。PASC的絮凝性能明显优于PAC。     

絮凝法处理含水溶性膦配体TPPTS废水

以Al-Fe混凝荆、聚丙烯酰胺（PAM）、十六烷基三甲基溴化铵（CTAB）为助凝剂,考察了水溶性膦配体间磺酸钠基三苯基膦（TPPTS）废水中化学耗氧量（COD）的去除率,以此来间接考察TPPTS的去除效果。结果表明,助凝剂的添加能提高COD的去除率。获得了化学耗氧量COD 1000～1500mg／L废水除膦的优化条件：pH=5．5,Al-Fe、CTAB、PAM的投加量分别为300mg／L、67mg／L和21mg／L时,COD去除率达92．9％。     

印染废水污染物在曝气生物滤池中的沿程去除规律

主要研究了曝气生物滤池（BAF）对印染废水中污染物的沿程去除规律。研究表明：BAF对印染废水污染物的去除沿高程有着不同的变化规律：在BAF总高度为300 cm,填料层高度为200 cm,气水比3∶1,停留时间11.8 h,的情况下, BAF对COD的去除主要集中在<160 cm的填料层部分,在总的去除率为63.1%时,此区域去除率可达56.60%;对NH3N的去除主要集中在填料层100～160 cm段,在总NH₃-N去除率为85.09%时,此区域NH₃-N去除率达38.28%。BAF对浊度的去除主要集中在填料层小于100 cm的部分,在总去除率为94.04%,区域去除率达到61.90%。印染废水经过BAF的前100 cm填料层后,pH值由10降至7.6后基本维持不变。     

Degradation of azo dyes in water by Electro-Fenton process

The degradation of the azo dyes azobenzene, p-methyl red and methyl orange in aqueous solution at room temperature has been studied by an advanced electrochemical oxidation process (AEOPs) under potential-controlled electrolysis conditions, using a Pt anode and a carbon felt cathode. The electrochemical production of Fenton's reagent (H₂O₂, Fe²⁺) allows a controlled in situ generation of hydroxyl radicals (^·OH) by simultaneous reduction of dioxygen and ferrous ions on the carbon felt electrode. In turn, hydroxyl radicals react with azo dyes, thus leading to their mineralization into CO₂ and H₂O. The chemical composition of the azo dyes and their degradation products during electrolysis were monitored by high performance liquid chromatography (HPLC). The following degradation products were identified: hydroquinone, 1,4-benzoquinone, pyrocatechol, 4-nitrocatechol, 1,3,5-trihydroxynitrobenzene and p-nitrophenol. Degradation of the initial azo dyes was assessed by the measurement of the chemical oxygen demand (COD). Kinetic analysis of these data showed a pseudo-first order degradation reaction for all azo dyes. A pathway of degradation of azo dyes is proposed. Specifically, the degradation of dyes and intermediates proceeds by oxidation of azo bonds and aromatic ring by hydroxyl radicals. The results display the efficiency of the Electro-Fenton process to degrade organic matter. Electronic Publication     

三硝基甲苯的γ-辐照降解实验研究

基于三硝基甲苯(TNT)溶液采用常规处理方法难以降解,采用60Co-γ射线对三硝基甲苯溶液进行辐照降解,研究了吸收剂量、初始浓度、溶液初始pH值、双氧水(H2O2)等因素对辐照降解效果的影响.实验结果表明,60Co-γ射线辐照能够有效地降解三硝基甲苯.三硝基甲苯溶液初始浓度为5—50 mg.L-1,当接受不超过15 kGy剂量时,三硝基甲苯的降解率可达100%,化学需氧量(COD)去除率可达55%;弱酸性和碱性环境更有利于三硝基甲苯的降解和COD的去除;加入少量H2O2时,三硝基甲苯降解率和COD去除速率均随之增加,但过高的H2O2加入量将会抑制三硝基甲苯的去除,并且加入H2O2的量愈大其抑制作用愈明显.