进口与国产COD消解测定仪测定废水COD的比对研究

应用消解分光光度法,比对了一款进口仪器和一款国产仪器应用于实际水样中COD含量测定的差异性。通过精密度、回收率、方法比对等实验分析得出,2款仪器应用电热消解分光光度法测定COD,实验结果与国标回流滴定法的实验结果基本一致,无显著性差异,具有可比性,可广泛用于水质评价和环境监测。与国产仪器相比,进口测定仪具有较小的偏差,较高的回收率。国产测定仪偏差较大的原因主要在于其比色装置,而不是用于前处理的消解装置。比较分析了2款仪器的购买和使用经济成本,为广大企事业及科研单位选用COD消解测定仪提供了有价值的基础数据和参考建议。     

浅谈TOC与CODCr的关系

介绍了TOC和CODCr的含义,比较了TOC与CODCr测定方法、使用仪器的不同和各自的优缺点,并从理论上和实际水样测定中论述了TOC和CODCr的相关性。对于不同的废水,TOC 与CODCr的相关性不一样,必须先实验求出二者之间的关系。     

地表水COD浓度灰色预测的GPPM（1）模型

根据地表水中ＣＯＤ浓度的时序数据,建立了ＧＰＰＭ（１）预测模型,结果表明ＧＰＰＭ（１）模型的预测精度优于常规灰色ＧＭ（１,１）模型,它为环境系统的拟合,预测和决策提供了新的方法途径。     

清河流域水质目标管理技术应用示范

针对清河流域三级水生态功能分区功能定位和水质保护目标,按照"分类、分区、分级、分期"理念,应用流域水质目标管理技术方法,研究清河流域控制单元污染负荷核定、水环境容量计算与分配、污染负荷削减、污染物总量控制等关键技术应用示范,完善流域水质目标管理技术,为清河流域水环境管理提供科技支撑。     

POLLUTANT LOADS IN URBAN STORMWATER: REVIEW OF METHODS FOR PLANNING-LEVEL ESTIMATES1

ABSTRACT: A review of methods for planning-level estimates of pollutant loads in urban stormwater focuses on transfer of charac. teristic runoff quality data to unmonitored sites, runoff monitoring, and simulation models. Load estimation by transfer of runoff quality data is the least expensive, but the accuracy of estimates is unknown. Runoff monitoring methods provide best estimates of existing loads, but cannot be used to predict load changes resulting from runoff controls, or other changes of the urban system. Simulation models require extensive calibration for reliable application. Models with optional formulations of pollutant build up, washoff, and transport can be better calibrated and the selection of options should be based on a statistical analysis of calibration data. Calibrated simulation models can be used for evaluation of control alternatives.     

VELOCITY EQUATION FOR WATER QUALITY MODELING IN GEORGIA1

ABSTRACT: Tabletop water quality modeling still plays an important role in the water pollution control activities of the Georgia Environmental Protection Division. Tabletop models are those developed with out the aid of extensive field data. One important component of GEORGIA DOSAG, our basic water quality model, is the equation used to predict flow through velocity. However, Georgia is characterized by wide physiographic diversity which reduces the effectiveness of uncalibrated velocity equations. Using 15 years of accumulated time-of-travel studies, a series of empirical velocity equations were developed and calibrated to various physiographic conditions in Georgia. Equations are available for each major soil province and for three stream flow ranges within each province - Q<100 cfs, 100<Q<1000 cfs, and Q>1000 cfs. Now, in the absence of extensive field data, we have data based velocity equations which can be tailored to each site under study.     

MODELING FECAL COLIFORM CONTAMINATION IN THE RIO GRANDE1

This study examines sources of fecal coliform in Segment 2302 of the Rio Grande, located south of the International Falcon Reservoir in southern Texas. The watershed is unique because the contributing drainage areas lie in Texas and Mexico. Additionally, the watershed is mostly rural, with populated communities known as “colonias.” The colonias lack sewered systems and discharge sanitary water directly to the ground surface, thus posing an increased health hazard from coliform bacteria. Monitoring data confirm that Segment 2302 is not safe for contact recreation due to elevated fecal coliform levels. The goal of the study was to simulate the observed exceedences in Segment 2302 and evaluate potential strategies for their elimination. Fecal coliform contributions from ranching and colonia discharges were modeled using the Hydrologic Simulation Program‐Fortran (HSPF). Model results indicated that the regulatory 30‐day geometric mean fecal coliform concentration of 200 colony forming units (cfu) per 100 milliliters is exceeded approximately three times per year for a total of 30 days. Ongoing initiatives to improve wastewater facilities will reduce this to approximately once per year for 14 days. Best management practices will be necessary to reduce cattle access to streams and eliminate all exceedences. The developed model was limited by the relatively sparse flow and fecal coliform data.     

河冰对桥墩作用的冰荷载计算方法(Ⅰ)——河冰的力学性能试验

通过对松花江河冰的物理力学性能试验和松花江公路大桥桥墩的流冰动压力测量、桥面的脉动测量 ,依据国内外对冰 -结构相互作用的分析 ,提出了适合我国黑龙江冰情特点的春季流冰冰荷载的计算方法。     

炼厂隔油后污水的有机构成及混凝处理

采用GC/MS技术分析了炼厂隔油后污水的有机组成,并研究了不同混凝剂处理污水的效果,以及对有机构成的影响。结果表明,隔油后污水中的有机物质主要是C6–C8,其中酚类物质的含量最高;PAM和PAC混凝处理隔油后污水,可使污水中的有机物质总浓度及各物质的相对比例均发生变化,PAM降低烃类物质的效果好于PAC,而后者降低酚类物质的效果好于前者;在PAC处理污水时,同时投加少量活性炭可有效改变PAC脱除COD的性能。     

A LARGE ELECTRONIC WEIGHING LYSIMETER SYSTEM: DESIGN AND INSTALLATION1

ABSTRACT: To measure crop evapotranspiration, a large double tank, electronic weighting lysimeter system was designed and installed at the Shahid Bahonar University farm, Kerman, Iran. The system was installed in a 50 m² underground building. It includes two tanks of 3.00 m in diameter and 1.75 m deep. The weighing mechanism for each tank is a set of three compression strain gage load cells, which are fixed on 1.20 m height column above the floor. According to the specification of the load cells, the maximum possible weighing error may be about 0.01 percent of total mass, which is equivalent to 0.28 mm of water, but the measured error was equal to 1 kg mass, which is equivalent to 0.14 mm of water. The load cell data from each tank and the on‐site environmental data (temperature, humidity, and wind velocity and direction) are automatically recorded and saved in a personal computer hard disk for further use and analysis.