中国污染密集型产业地理分布研究

随着资源环境约束加强,调整产业结构、优化产业空间布局已成为我国经济发展的战略选择。产业空间格局重置过程中,污染密集型产业的转移成为一个迫切需要研究的问题。论文利用2003-2008 年工业企业普查数据,采用Tobit 模型和Heckman 两阶段模型,探讨污染密集型产业地理分布的特征。论文发现,我国污染密集型产业正在进行空间结构调整,长江三角洲、珠江三角洲、京津冀地区污染密集产业不断转出,山东及中部地区开始成为污染密集型产业新的集聚地;造纸等较为轻型产业主要向中部内陆等地区转移,而化学原料及化学制品业等技术密集型产业则更主要在沿海地带重新分布。另外,要素禀赋、环境规制以及全球化对污染密集型产业分布影响显著。其中,技术以及劳动力成本是污染企业区位选择的重要影响因素;受全球化的影响,国际市场潜力对污染企业区位影响更为重要;环境规制与污染企业的成立具有倒U型关系;最后,企业的异质性对于污染企业地理分布也具有显著的影响。文章启示,在产业转移过程中,需要适当的政策引导以最小化对生态环境的破坏。     

水解酸化法预处理生物制药废水的试验研究

对生物制药废水水解酸化反应器采用接种污泥的方式进行启动,在不断增加进水污染负荷的条件下,40 d 内完成水解酸化反应器的启动。试验研究表明：当水解酸化反应器的水力停留时间为8h 时, COD 去除率可达到34．2％。而且,水中有机氮在水解酸化过程中转化为氨氮,为后续二级生物处理提供了高效去除氨氮的基础。     

美国化学防护服试验与评价用机器人PETMAN研究

美国化学防护服防护因数测试方法-MIST法是评价化学防护服整体防护性能关键技术指标的通行方法,针对现有MIST方法中存在无法对真人采用实际的有毒有害物质对化学防护服进行评价的不足,采用机器人PETMAN替代真人进行MIST试验与评价的需求日益明显。本文针对PETMAN的主要技术构成和相关需求部门提出的要求,详细介绍了研制过程中需要考虑的关键因素,并概述了项目的研究过程以及当前的研究成果。     

基于T-RFLP和因子分析的香蒲根际细菌群落研究

以北京市永定河王平湿地为研究对象,应用末端限制性片段长度多态性(T-RFLP)对王平湿地再生水补水口及其远离补水口的香蒲根际细菌和氨氧化细菌(AOB)的群落结构及多样性变化进行分析,在此基础上结合MiCA3比对、典范对应分析(CCA)和多元统计中因子分析(FA),解析湿地不同空间细菌群落功能特性的变化.结果显示再生水补水口细菌群落各多样性指数均明显低于远离补水口细菌群落,而氨氧化细菌群落则呈现相反趋势.基于传统的T-RFLP片段MiCA3比对、CCA和FA相结合的分析表明:对细菌群落,占再生水补水口细菌群落总丰度55.6%的菌群与150bp代表的鞘氨醇单胞菌(Sphingomonas sp.)具相似净化功能,并与总有机碳生物化学循环过程具密切关系,其次占再生水补水口上游细菌群落总丰度75.5%的菌群与81bp为代表的假单胞菌属(Pseudomonas sp.)和Geitlerinema sp.具相似净化功能,并与氮的生物化学循环过程具密切关系.占再生水补水口下游细菌群落总丰度68.7%的菌群与138bp代表的小单孢菌属(Micromonospora sp.)具相似净化功能,同时与重金属Cu、V、和Ti生物化学循环具密切关系.对氨氧化细菌,266bp受铵态氮影响较大,占再生水补水口氨氧化细菌群落总丰度65.5%的菌群与266bp代表的Nitrosomonas sp.具相似的生境特征,适合在高氨环境中生长;与58bp所代表的Nitrosospira sp.具相似功能特性菌群丰度在远离补水口样点中较前者呈现显著增加趋势,表征该类菌群适合在相对低氨环境中生长.     

多参数指示南极普里兹湾浮游植物的时空变化

以南极普里兹湾沉积物为研究对象,运用气相色谱技术,研究了生物标志物菜子甾醇、甲藻甾醇、长链烯酮对应指示的硅藻、甲藻、颗石藻等浮游植物的生产量和种群结构的历史变化,结合2001—2011年实测和遥感水体ρ(Chla)(Chla为叶绿素a)及SST(海水表层温度)数据,探讨了该湾浮游植物生产量时空变化特征及其影响因素. 结果表明:过去100多年间南极普里兹湾浮游植物总生产量(212.04~759.10 ng/g)〔以w(菜子甾醇)+w(甲藻甾醇)+w(长链烯酮)计〕和w(硅藻)所占比例(62.28%~87.13%)〔以w(菜子甾醇)所占比例计〕均呈上升趋势,而w(甲藻)所占比例(10.09%~27.98%)〔以w(甲藻甾醇)所占比例计〕和w(颗石藻)所占比例(1.97%~9.74%)〔以w(长链烯酮)所占比例计〕则呈下降趋势. 全球变暖背景下浮游植物种群变动通过改变南大洋对CO₂的吸收进而影响全球碳循环. 水体ρ(Chla)与沉积生物标志物指示的浮游植物总生产量均具有湾内高、湾外低的空间分布特征. 湾内ρ(Chla)与SST的年际变化趋势相似,二者以2002—2003年和2009—2010年相对较高,SST分别为-0.30和0.01 ℃,ρ(Chla)分别为1.69和2.31 mg/m3;以2001—2002年和2010—2011年相对较低,SST分别为-1.19和-0.95 ℃,ρ(Chla)分别为1.08和0.79 mg/m3,表明该湾SST变化可较明显地影响浮游植物的生长.      

Identification of pakchoi cultivars with low cadmium accumulation and soil factors that affect their cadmium uptake and translocation

The selection and use of low-Cd-accumulating cultivar （LCAC） has been proposed as one of the promising approaches in minimizing the entry of Cd in the human food chain. This study suggests a screening criterion of LCACs focusing on food safety. Pot culture and plot experiments were conducted to screen out LCACs from 35 pakchoi cultivars and to identify the crucial soil factors that affect Cd accumulation in LCACs. Results of the pot culture experiment showed that shoot Cd concentrations under the three Cd treatments significantly varied across cultivars. Two cultivars, Hualv 2 and Huajun 2, were identified as LCACs because their shoot Cd concentrations were lower than 0.2 mg. kg-1 under low Cd treatment and high Cd exposure did not affect the biomass of their shoots. The plot experiment further confirmed the consistency and genotypic stability of the low-Cd- accumulating traits of the two LCACs under various soil conditions. Results also showed that soil phosphorus availability was the most important soil factor in the Cd accumulation of pakchoi, which related negatively not only to Cd uptake by root but also to Cd translocation from root to shoot. The total Cd accumulation and translocation rates were lower in the LCACs than in the high-Cd cultivar, suggesting that Cd accumulation in different cultivars is associated with the Cd uptake by root as well as translocation from root to shoot. This study proves the feasibility of the application of the LCAC strategy in pakchoi cultivation to cope with Cd contamination in agricultural soils.     

Major accident management in the process industry: An expert tool called CESMA for intelligent allocation of prevention investments

A tool (called CESMA) was developed to carry out cost–benefit analyses and cost-effectiveness analyses of prevention investments for avoiding major accidents. A wide variety of parameters necessary to calculate both the costs of the considered preventive measures and the benefits related with the avoidance of accidents were identified in the research. The benefits are determined by estimating the difference in (hypothetical) major accident costs without and with the implementation of a preventive measure. As many relevant costs and benefits as possible were included into the tool, based on literature and expert opinion, in order to be able to deliver an all-embracing cost–benefit analysis and cost-effectiveness analysis to assist in the investment decision process. Because major accidents are related to extremely low frequencies, the tool takes the uncertainty of the unwanted occurrence of a major accident into account through the usage of a so-called ‘disproportion factor’. Compared with existing software, the CESMA tool is innovative by striving for an as-accurate-as-possible picture of costs and benefits of major accident prevention, and taking the uncertainties accompanying disastrous events into consideration. Furthermore, an illustrative example of CESMA is presented in the paper.     

Performance evaluation of integrated resilience engineering factors by data envelopment analysis: The case of a petrochemical plant

Petrochemical units are potentially prone to incidents that have catastrophic consequences such as explosion, leakage of toxic materials, and the stoppage of the production process. Resilience engineering (RE) is a new method that can control incidents and limit their consequences. It includes top-level commitment, reporting culture, learning, awareness, preparedness, and flexibility. However, this study introduces a new concept of RE (referred to as integrated RE or IRE) which includes the above factors in addition to self-organization, teamwork, redundancy and fault-tolerant. This study evaluates performance of IRE in a petrochemical plant through considering the obtained data from questionnaires and data envelopment analysis (DEA) approach. Moreover, the performance of RE and the new IRE are compared and discussed. The results show that although there is a strong direct correlation between the DEA results in two frameworks, the mean scores of efficiency in IRE is slightly higher than RE. This is the first study that introduces an integrated approach for RE. In addition, this study is amongst the first ones that examine the behavior of resilience engineering by DEA. Moreover, the superiority of IRE is shown through robust statistical analysis.     

有色金属冶炼区铊(Tl)的水环境分布特征与环境对策--以大冶冶炼厂地区的东岗河为例

以大冶冶炼厂地区的东岗河为例,分析有色金属冶炼区铊的水环境分布特征,结果表明：河水中的铊含量明显异常(严重污染区的平均含量为15．07ng／mL。远超过饮用水源水中铊的最高允许浓度0．1ng／mL)．且与水体pH值、Cu^2 、Pb^2 等含量显著相关;铊与Pb等亲铜元素呈类质同像。宏观上与方铅矿、闪锌矿、黄铁矿、黄铜矿等伴生．因此后者成为研究区铊的重要来源。最后,对铊所造成的环境危害效应．提出相应的解决对策,并提醒人们提高对铊污染的警惕性以及加深对铊的研究。     

乌鲁木齐市重污染天气与气象因素变化的影响分析

利用乌鲁木齐市近年来的空气污染监测资料和同期气象观测资料,研究乌鲁木齐市重污染天气的变化特征及其与气象条件的关系,并从气象特点、局地因子等方面的变化分析污染严重的成因,进一步研究造成重污染的物理机制,为今后乌鲁木齐市空气污染综合治理提供科学依据与建议。