Analyzing the cost effectiveness of Santiago, Chile's policy of using urban forests to improve air quality

Santiago, Chile has the distinction of having among the worst urban air pollution problems in Latin America. As part of an atmospheric pollution reduction plan, the Santiago Regional Metropolitan government defined an environmental policy goal of using urban forests to remove particulate matter less than 10 microm (PM(10)) in the Gran Santiago area. We used cost effectiveness, or the process of establishing costs and selecting least cost alternatives for obtaining a defined policy goal of PM(10) removal, to analyze this policy goal. For this study, we quantified PM(10) removal by Santiago's urban forests based on socioeconomic strata and using field and real-time pollution and climate data via a dry deposition urban forest effects model. Municipal urban forest management costs were estimated using management cost surveys and Chilean Ministry of Planning and Cooperation documents. Results indicate that managing municipal urban forests (trees, shrubs, and grass whose management is under the jurisdiction of Santiago's 36 municipalities) to remove PM(10) was a cost-effective policy for abating PM(10) based on criteria set by the World Bank. In addition, we compared the cost effectiveness of managing municipal urban forests and street trees to other control policies (e.g. alternative fuels) to abate PM(10) in Santiago and determined that municipal urban forest management efficiency was similar to these other air quality improvement measures.     

Baseline assessment for environmental services payments from satellite imagery: a case study from Costa Rica and Mexico

In this study we evaluate the accuracy of four global and regional forest cover assessments (MODIS, IGBP, GLC2000, PROARCA) as tools for baseline estimation. We conduct this research at the national scale for Costa Rica and for two tropical dry forest study sites in Costa Rica (Santa Rosa) and Mexico (Chamela-Cuixmala). We found that at the national level, the total forest cover accuracy of the four land cover maps was inflated due to an overestimation of forest in areas with an evergreen canopy. However, the four maps greatly underestimated the extent of the deciduous forest (dry forest); an ecosystem that faces high deforestation pressure and poses complications to the mapping of its extent from remotely sensed data. For the tropical dry forest sites, all maps have low forest cover accuracies (mean for Santa Rosa: 27%; mean for Chamela-Cuixmala: 56%). This has implications for policy implementation.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

碳氮磷比失调对污水生物脱氮除磷的影响

我国南方城市污水普遍存在低碳相对高氮磷特征,本文介绍了同时生物脱氮除磷的机理、对碳源的需求与竞争,以及一些针对此类污水生物脱氮除磷的改进工艺及其在实际运用中的效果,并对此类污水的处理方向进行了展望。     

The greenhouse gas balance of the Province of Siena

There is a profound debate over how to assign greenhouse gas (GHG) responsibilities; therefore, we have decided to follow IPCC guidelines, as they offer the only standardized method. We have identified each type of greenhouse emission and its level of absorption. We have studied the province and its districts and municipalities. We have determined that the energy sector is that with the highest level of emissions, even if the per capita emissions of the Province of Siena are very low. This is caused by a very low level of industrialization and the presence of a local geothermal production of energy. In order to highlight this aspect, we have considered scenarios both with and without geothermal production. Our research was then focused on single districts (groups of homogenous municipalities) and municipalities, where we found great differences among the greenhouse emissions of the areas. We have constructed a map of the greenhouse emissions of the whole province. It has been interesting to note that there are 14 municipalities with net negative emissions, seven with low positive emissions, 12 with medium positive emissions and three with elevated positive emissions. These latter correspond to the main city and to two of the most industrialized municipalities.     

Electric Swing Adsorption for CO2 removal from flue gases

One of the most important sources of CO₂ emissions are the fossil-fuel fired plants for production of electricity. Removal of CO₂ from flue gas streams for further sequestration has been proposed by the International Panel on Climate Change experts as one of the most reliable solutions to mitigate anthropogenic greenhouse emissions. When natural gas is employed as fuel, the molar fraction of CO₂ in the flue gas is lower than 5% causing serious problems for capture. The purpose of this work is to present experimental validation of an Electric Swing Adsorption (ESA) technology that may be employed for carbon capture for low molar fractions of CO₂ in the flue gas streams. To improve energy utilization, an activated carbon honeycomb monolith with low electrical resistivity was employed as selective adsorbent. A mathematical model for this honeycomb is proposed as well as different ESA cycles for CO₂ capture.     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。     

Carbon capture and storage-desirability from a risk management point of view

Environmental and safety risks related to carbon capture and storage concern leakages and accidental releases during transport and geological storage. Based on principles widely accepted in the EU and beyond in the discussion about the where’s and why’s of nuclear waste repositories, this paper discusses the desirability of carbon capture and storage from a risk management point of view, focusing on environmental risks on the global level (climate change). On this basis it is concluded that, if the key energy issue of coming generations, not just in Europe but all around the world, is not the abundance of fossil resources but rather an unacceptably high probability of global warming due to greenhouse gas emissions, then the solution should not include any massive hiding of the emissions but entirely focus on the avoidance based on improved technology in power plants and other industrial installations.     

Carbon Monoxide Concentration in a Street Canyon of Buenos Aires City (Argentina)

The analysis of three years of 8-h CO concentration values registered in a deep street canyon downtown shows high frequency of values that exceed WHO health protection guidelines. An inverse relationship between opposing percentiles of the distributions of CO concentrations and mean wind speed could be found. Data also showed a variation of mean CO values with prevailing wind direction. The averaged concentration value obtained when the sampler probe is on the leeward side is lower than the obtained when it is on the windward wall. A preliminary explanation of this feature may be related to the advection of polluted air from a high traffic density area nearby.