The gloomy greenhouse: Should the world phase out fossil fuels?

In 1988 the Toronto World Conference on the Changing Atmosphere called for a reduction of CO₂ emissions of the industrialized countries by approximately 20% by the year 2005 as compared with 1988. A stabilization of CO₂ concentrations would require an eventual emissions reduction of more than 50% of present levels. Model runs were performed with the Dutch Integrated Model for the Assessment of the Greenhouse Effect (IMAGE) to put these figures into perspective. It was found that the suggested emissions reduction levels could indeed be adequate to prevent global temperature change from moving beyond past climate experience. However, this would only be the case when these reduced levels of emissions were achieved at a global scale and maximum emission control for the other greenhouse gases was implemented. A delayed response analysis shows that the policies of the coming decades are crucial for the eventual control of the greenhouse effect.     

Electric Swing Adsorption for CO2 removal from flue gases

One of the most important sources of CO₂ emissions are the fossil-fuel fired plants for production of electricity. Removal of CO₂ from flue gas streams for further sequestration has been proposed by the International Panel on Climate Change experts as one of the most reliable solutions to mitigate anthropogenic greenhouse emissions. When natural gas is employed as fuel, the molar fraction of CO₂ in the flue gas is lower than 5% causing serious problems for capture. The purpose of this work is to present experimental validation of an Electric Swing Adsorption (ESA) technology that may be employed for carbon capture for low molar fractions of CO₂ in the flue gas streams. To improve energy utilization, an activated carbon honeycomb monolith with low electrical resistivity was employed as selective adsorbent. A mathematical model for this honeycomb is proposed as well as different ESA cycles for CO₂ capture.     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

火电厂CO2捕集与封存技术探讨

火电厂CO2减排技术主要包括燃烧前处理、燃烧中减排及燃烧后捕集三类。介绍了IGCC、富氧燃烧、胺吸收法、生物法等CO2捕集与封存技术,分析其存在问题及应用前景。     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

Carbon Monoxide Concentration in a Street Canyon of Buenos Aires City (Argentina)

The analysis of three years of 8-h CO concentration values registered in a deep street canyon downtown shows high frequency of values that exceed WHO health protection guidelines. An inverse relationship between opposing percentiles of the distributions of CO concentrations and mean wind speed could be found. Data also showed a variation of mean CO values with prevailing wind direction. The averaged concentration value obtained when the sampler probe is on the leeward side is lower than the obtained when it is on the windward wall. A preliminary explanation of this feature may be related to the advection of polluted air from a high traffic density area nearby.     

Cracking styrene derivative polymers in decalin solvent with metal-supported carbon catalysts

The cracking of styrene derivative polymers dissolved in decalin was conducted with metal-supported carbon catalysts under an inert gas atmosphere to recover monosubstituted styrene or monosubstituted ethylbenzene in higher yields than is obtained by pyrolysis, and to elucidate the detailed reaction mechanisms in the solvent. Poly-(4-methylstyrene), poly-(4-t-butylstyrene), poly-(α-methylstyrene), and polystyrene were used. In decalin without a catalyst, each polymer was decomposed into the monomer, dimer, and trimer derived from the corresponding polymer except for poly-(α-methylstyrene), which was decomposed into the monomer and styrene. By using metal-supported carbon, the olefinic compounds derived from the corresponding polymer were thoroughly hydrogenated to the saturated form in a nitrogen atmosphere by a hydrogen transfer reaction from decalin, which was simultaneously dehydrogenated to tetralin and naphthalene with the evolution of hydrogen gas. In comparison with metal species, Pd- and Ru-supported carbon catalysts maintained the hydrogenation activity for a longer time and with a lower evolution of hydrogen than Pt or Rh. The dehydrogenation of decalin was mainly observed not on the metal surfaces, but on the carbon surfaces over Pd-supported carbon. Stabilization of the monomers will be able to suppress the coking which occurs with repolymerization in long running process. Received: July 19, 2000 / Accepted: March 16, 2001     

库仑滴定法测定一氧化碳

本文就一氧化碳的测定条件和CO氧化过程中氧化剂的选择进行了研究。试验表明:ReAO_4-Ⅱ为氧化CO的活性催化剂,转化率可达100％(在300℃以上),本法简便,可用于空气中一氧化碳的测定和催化剂对CO活性测试。     

碳汇造林项目促进了当地经济发展吗?--基于四川县域面板数据的PSM-DID实证研究

林业是重要的碳汇资源,在减缓全球气候变化、改善自然生态环境、促进经济可持续发展等方面有着至关重要的作用。作为林业碳汇的重要实现形式,碳汇造林项目兼具生态保护、促进经济发展与贫困减缓等重要功能,其实施成效究竟如何需要进一步验证。为此,本文从理论上分析了碳汇造林项目对县域经济发展的影响机理,利用2000—2016年四川47个县域的面板数据,采用PSM-DID模型估计了碳汇造林项目对县域经济发展的平均效应和动态效应,并对其影响机理进行了验证。结果显示:①碳汇造林项目的实施显著地促进了地区实际GDP和人均实际GDP的增长,这一结论在进行稳健性检验后依然成立;②囿于项目周期较长,此促进作用在短期内尚不能立竿见影,具有明显的滞后效应,且实施的时间越长,对当地经济发展的促进作用越大;③碳汇造林项目主要通过优化当地产业结构、提高居民储蓄率、提升地区政府财政收支水平等途径促进当地经济发展。因此,为更好地发挥碳汇造林项目对县域经济发展的促进作用,应继续拓展碳汇造林项目的覆盖区域,加大专项投资力度,引导碳汇造林项目向生态脆弱的深度贫困地区倾斜;在更加注重碳汇造林项目的长期效应的同时,应建立完善项目运行的长效稳定机制,防范潜在的自然与市场风险,保障项目对地区经济发展的长期驱动力;加快改善地区的融资环境,鼓励居民和企业将储蓄和融资能力有效转化为投资能力,充分依托碳汇造林项目促进当地经济可持续发展。     

Estimation of atmospheric trace metal emissions in Vilnius City, Lithuania, using vertical concentration gradient and road tunnel measurement data

A new approach for the estimation of trace metal emissions in Vilnius city was implemented, using vertical concentration profiles in the urban boundary layer and road tunnel measurement data. Heavy metal concentrations were examined in fine and coarse particle fractions using a virtual impactor (cut-off size diameter 2.5 μm). Negative vertical concentration gradients were obtained for all metals (Ba, Pb, V, Sb, Zn) and both fractions. It was estimated that the vertical concentration gradient was formed due to emissions from an area of about 12 km². Road tunnel measurements indicated that trace metal concentrations on fine particles were lower than those on coarse particles, which suggested that re-emitted road dust was highly enriched in trace metal due to historic emissions within the tunnel. Emission rates of different pollutants in the road tunnel were calculated using pollutant concentration differences at the tunnel entrance and exit and traffic flow data. Heavy metal emission rates from the area of Vilnius city were estimated using the vertical gradient of heavy metal concentrations and the coefficient of turbulent mixing, as derived from meteorological measurement data. The emission values calculated by the two different methods coincided reasonably well, which indicated that the main source of airborne trace metals in Vilnius city is traffic. The potential of the vertical concentration gradient method for the direct estimation of urban heavy metal emissions was demonstrated.