论主要污染物减排中的环境管理

主要污染物减排是实现代价小、效益好、排放低、可持续环保新道路的主要抓手。"十二五"期间主要污染物减排因子增加,减排削减的范围覆盖面更广,减排难度也明显加大。在工程减排空间和潜力相对减少时,更加突出结构减排。创新机制体制,完善制度减排,保障减排实施是环保部门管理减排工作的重点。因此,通过源头防控、设施监管、考核革新、提升能力、以奖代补、落后产能退出、减排约谈、动态预警和领导蹲点等措施是提升管理减排效益的关键。     

种植密度和降水对冬小麦田N2O排放的影响

为研究种植密度对农田N2O排放的影响和探讨N₂O排放季节性波动的原因,于1999～2000年小麦生长季在南京市郊江宁县进行了不同播种量(0、90、180和270kg/hm²)的大田试验.观测分析结果表明:在相同的气象条件和田间管理下,播种～越冬阶段的N₂O排放不受播种量的影响,返青～成熟阶段的N₂O排放通量与播种量成正比.裸地条件下的N₂O排放与播量为90kg/hm²下的排放无明显差异.造成该生长季内N₂O排放季节性波动的主要原因是降水,返青～成熟阶段的N₂O排放通量随观测日前6d的加权平均降水量呈指数增加.     

Appraisal of measurement methods, chemical composition and sources of fine atmospheric particles over six different areas of Northern Belgium

Daily and seasonal variation in the total elemental, organic carbon (OC) and elemental carbon (EC) content and mass of PM_2.5 were studied at industrial, urban, suburban and agricultural/rural areas. Continuous (optical Dustscan, standard tapered element oscillating micro-balance (TEOM), TEOM with filter dynamics measurement system), semi-continuous (Partisol filter-sampling) and non-continuous (Dekati-impactor sampling and gravimetry) methods of PM_2.5 mass monitoring were critically evaluated. The average elemental fraction accounted for 2-6% of the PM_2.5 mass measured by gravimetry. Metals, like K, Mn, Fe, Cu, Zn and Pb were strongly inter-correlated, also frequently with non-metallic elements (P, S, Cl and/or Br) and EC/OC. A high OC/EC ratio (2-9) was generally observed. The total carbon content of PM_2.5 ranged between 3 and 77% (averages: 12-32%), peaking near industrial/heavy trafficked sites. Principal component analysis identified heavy oil burning, ferrous/non-ferrous industry and vehicular emissions as the main sources of metal pollution.     

Quantification of the interactions between Ca,Hg and extracellular polymeric substances (EPS) of sludge

The interactions between metals (Ca²⁺ and Hg²⁺) and extracellular polymeric substances (EPS) extracted from the aerobic and anaerobic sludge in wastewater treatment reactors were investigated using a combination of zeta potential measurement and 3-dimensional excitation–emission matrix (EEM) fluorescence spectroscopy with parallel factor (PARAFAC) analysis. Results show that Ca²⁺ had no substantial effects on the EEM fluorescence spectra of the EPS, but their zeta potentials increased with the increasing Ca²⁺ dosage. However, Hg²⁺ had a significant effect on the EEM fluorescence spectra of the EPS, while their zeta potentials seemed not to be affected by the dose of Hg²⁺. The interactions between Hg²⁺ and EPS were elucidated using the fluorescence quenching with PARAFAC analysis, while the interactions between Ca²⁺ and EPS were evaluated by the zeta potential technique. The binding constants for Hg²⁺ and EPS were two orders of magnitude higher than those for Ca²⁺ and EPS, suggesting that the binding mechanisms between Ca²⁺ and EPS were different from those between Hg²⁺ and EPS. The results might be useful for understanding the roles of EPS in bacterial self-protection against heavy metals and the aggregate formation mechanisms through ionic bridging interactions.     

印刷环节挥发性有机物无组织排放特征测定研究

对使用溶剂型油墨的凹版印刷设备和使用水性油墨的柔版印刷设备无组织排放的挥发性有机物(VOCs)浓度进行了实际监测,并采用计算流体动力学模拟无组织排放VOCs的收集效率。结果表明：(1)使用溶剂型油墨的凹版连续印刷过程非甲烷总烃(NMHC)最高均值达到5 975.67 mg/m³,约为使用水性油墨的柔版印刷(191.67 mg/m³)的31.2倍。虽然使用水性油墨可明显降低NMHC的排放,但其操作空间的浓度依然存在超过《工作场所有害因素职业接触限值第1部分：化学有害因素》(GBZ 2.1—2019)的现象。(2)印刷车间应该设置专门的调墨室,能缓解印刷车间内挥发性污染气体浓度的波动。(3)计算流体动力学模拟显示,设置合理的集气罩可有效降低VOCs的无组织排放,收集效率为70%～75%。     

兰州市典型企业VOCs排放特征及反应活性分析

基于兰州市大气VOCs排放清单,选取石化厂、乙烯厂、涂料厂3个典型企业采集VOCs样品,分析其无组织排放特征,并采用MIR（最大增量反应活性）法和LOH（·OH反应速率）法综合评价其化学反应活性,识别各企业的VOCs活性优势物种,同时探究不同企业特征VOCs比值.结果表明:不同排放源φ（VOCs）差异较大,范围为20.8×10-9~6 520.3×10-9.从VOCs物种构成上来看,涂料厂芳香烃占比最高,而石化厂、乙烯厂均以烷烃物种最为丰富,石化厂不同工艺VOCs物种构成略有差异.从活性上看,涂料厂VOCs活性最高,其LOH和OFP（臭氧生成潜势）分别为2 676.9 s-1和72 519.0×10-9,约为其他行业的18~1 000倍,间/对-二甲苯、乙苯、邻二甲苯等物种活性较大;其次为石化厂,其LOH和OFP分别为273.2 s-1和4 039.1×10-9,正戊烷、异戊烷、乙烯、丙烯等物种活性贡献率高,其中柴油工艺对石化厂VOCs活性贡献率最大;乙烯厂的OFP最低,其LOH和OFP分别为4.6 s-1和69.7×10-9,其VOCs活性主要来自乙烯、丙烯、正丁烯等烯烃物种.各工业源BTEX（苯、甲苯、乙苯及3种二甲苯异构体的合称）分布具有一定的差异,对于指示不同VOCs来源有一定的参考价值,但不同源比值的重叠性也表明并非全部VOCs来源可以通过特征物种比值来区分.研究显示,控制工业源特别是涂料与石化工业VOCs的排放有助于控制兰州市O₃的生成.      

汽车零配件涂装过程VOCs排放特征与案例分析

VOCs（挥发性有机物）现已被列为我国大气环境领域的核心污染物.随着汽车零配件制造行业减排要求的提出,于2018年6月选取典型汽车零配件制造企业,采用美国TO-15方法分析VOCs物种,采用FID（氢离子火焰检测器）对NMHC（非甲烷总烃）进行实测,分析汽车零配件涂装过程的VOCs排放特征.结果表明:①由于分析方式的不同,有组织排放的ρ（NMHC）比ρ（VOCs）高1.3~1.9倍,其中末端未安装VOCs处理设施的排气筒排放的ρ（NMHC）最高.②汽车零配件涂装过程排放的主要VOCs物种质量浓度占比范围分别为46.72%~98.33%（芳香烃）、1.20%~52.90%（含氧VOCs）,其中ρ（二甲苯）、ρ（苯系物）超标（DB 31/933—2015《大气污染物综合排放标准》）情况较为严重.③未进入VOCs处理装置前的VOCs物种组成与原辅料中VOCs物种组成一致,二者主要VOCs物种的质量分数大致相同,说明生产工艺的不同对VOCs的排放组成影响较小.④比较RTO（蓄热式热力燃烧装置）和活性炭吸附装置处理VOCs前、后废气组成的差异发现,活性炭吸附装置处理对VOCs排放的组成基本无影响,经RTO处理后排放物种以芳香烃和含氧VOCs为主,但是w（芳香烃）和w（含氧VOCs）变化不一致,说明RTO对芳香烃和含氧VOCs处理效率不同.研究显示,为满足国家对汽车零配件制造行业VOCs的减排要求,源头使用高固分涂料或水性涂料替代溶剂型涂料,优化过程收集系统,增强末端处理技术的净化效果、安全性和稳定性,是实现汽车零配件制造行业全过程减排的重要手段.      

An Assessment on Variation of Sulphur Dioxide and Particulate Matter in Erzurum (Turkey)

Sulphur dioxide and PM₁₀ levels are investigated in Erzurum during the periods of 1990–2000 heating season to assess air pollution level. For that reason, emissions of sulphur dioxide and particulate matter were calculated by using consumption of fuels and Turkish emission factors. These emission values were evaluated together with air pollution levels, which were measured at six stations in Erzurum atmosphere during 1990–2000 winter periods. Results reveal that in 1990–1994 heating period, there is an increasing trend in the emissions and air pollution levels over Erzurum, and the air quality limits were not met. The daily 24 h limit (short-term limit) was exceeded 127 days in 1992–1993 winter period. The reason for this increase was found to be the switching to use of low-quality fossil fuels instead of cleaner ones. Results also indicated that there was a considerable decrease in emissions of air pollutants and air pollution levels after 1995. This can be explained by the consumption of more high-quality fossil fuels. The correlation coefficient of SO₂ with PM₁₀ is obtained as r² = 0.85, which is a high value supporting the idea that both pollutants are emitted from the same source.     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g;生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2; 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率; I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一;危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

臭氧-生物活性炭技术在微污染饮用水处理中的应用

通过研究国内外臭氧—生物活性炭工艺的发展现状和应用实践，指出了该项技术在应用中体现出的优越性，并提出了此项技术在应用中存在的问题，部分地介绍了提高此项技术应用水平的措施。研究表明，臭氧—生物活性炭工艺在处理微污染饮用水将会受到重视和广泛地推广应用，同时也对今后的研究方向提出了相应的观点。