鼎湖山针阔叶混交林土壤COS和CO_2通量研究

运用静态箱-预浓缩-气相色谱-质谱法和静态箱-色谱法分别测量了南亚热带鼎湖山针阔叶混交林土壤-大气COS和CO2通量。结果表明,土壤吸收COS,凋落物保留样地COS吸收速率显著高于凋落物去除样地,3月土壤COS吸收速率最高。土壤COS吸收速率与大气COS浓度正相关。土壤COS吸收速率与土壤温度、土壤含水量单独未表现出显著相关性,但凋落物保留样地COS吸收速率与土壤温度和含水量两者共同呈二次多项式相关。凋落物保留样地CO2释放速率高于凋落物去除样地。与土壤COS吸收速率相反,土壤CO2释放速率3月最低,7月最高,主要受温度和土壤含水量的影响。土壤CO2释放速率与土壤温度呈指数相关,与土壤含水量直线相关,多元回归分析表明,土壤CO2释放受温度和含水量的共同影响。土壤COS吸收速率随土壤CO2释放速率的增加而增加,表明两者可能受某些共同因素的影响。     

基于生态系统供给及净化服务功能的贵州省水生态占用研究

针对传统及现有水生态足迹理论及其模型存在的缺陷与不足,本文提出了基于生态系统供给及净化服务功能的贵州省水生态占用概念与模型,将其划分为生物生产和非生物生产的水生态占用两部分,建立水产品、水资源、水环境3类账户,并在此基础上以2000—2014年的贵州省为例进行计算分析,结果表明:(1)水产品账户中,贵州省水产品消费的水生态占用总体呈上升趋势,水生态承载力波动变化较小,水产品消费呈生态赤字状态,且其生态压力较大;(2)水资源账户中,贵州省淡水资源的水生态占用整体呈逐渐上升趋势,水生态承载力则呈明显波动的趋势,且变化幅度较大,淡水资源消费处于生态盈余状态,且其与水生态承载力的变化态势一致,淡水资源消费的生态压力较小;(3)水环境账户中,水环境生态压力主要来源于氮污染,2000—2010年消纳污染的水生态占用变化不大,2011—2014年波动较大,历年生活水污染账户值均大于工业,今后要注重加强生活水污染防治,消纳污染的水生态承载力呈波动变化的趋势,水环境处于生态赤字状态,且其生态压力较高;(4)与现有生态足迹模型的比较分析可知:该模型核算更为全面;不考虑均衡因子,并以最大水生态压力指数来评价区域水生态系统所承受的压力状态具有合理性,更能准确反映贵州水生态的实际情况和水生态文明建设的需要.     

海南省人类活动对自然生态的影响

将社会库存、水资源足迹和污染足迹纳入生态足迹需求计算模型,改进和完善了生态足迹需求理论与方法. 依据海南省统计年鉴资料,计算并分析了海南省1952—2004年的生态足迹,揭示了海南省52年来对自然资源利用的状况和特征.结果表明:①海南省可再生资源生态足迹占总生态足迹的绝大部分,二者呈同步增长态势,但距离在加大;②海南省对自然资源的利用主要集中于海洋、耕地和能源用地,对草地、林地、淡水水域和建设用地的利用强度相对较小,对水资源的利用强度明显减少;③海南省万元GDP生态足迹呈下降趋势,资源利用效益逐步提高. 海南省生态足迹动态变化的原因包括:①海南省生态足迹的变化是海南省经济生产和消费结构变化的结果,经济和人口增长导致资源的大量消耗,是造成生态足迹不断上升的主要原因;②海南省经济生产的主要方式是农业,农业问题是海南省可持续发展需要解决的首要问题;③海南省对耕地、林地和水资源的利用逐步下降,近几年对水域特别是海洋动物性食品的需求急剧增加,这是居民收入水平上涨的结果。      

基于生命周期评价的风力发电机碳足迹分析

本文以我国市场占用率最高的2 MW双馈式风力发电机为研究对象,采用生命周期评价(LCA)方法,核算其全生命周期过程的碳足迹和总能量需求,分析风力发电机不同生命周期阶段的环境影响,识别其减碳潜力.研究结果表明,风力发电机生产阶段、运输阶段、运行阶段和废弃处理处置阶段的碳足迹(以CO2-eq计,下同)分别为1701 t、61 t、255 t和-325 t;各生命周期阶段的总能量需求分别为10413 GJ、701 GJ、1561.95 GJ和-1081 GJ.风力发电机的碳足迹和总能量需求主要来源于生产阶段,废弃处理处置阶段材料的回收利用有效的降低了生命周期的碳足迹和总能量需求.生产阶段的碳足迹和总能量需求分别占全生命周期碳足迹和总能量需求的101%和90%;废弃处置阶段对碳足迹和总能量需求的贡献为-19%和-10%.每1k Wh风力发电的碳足迹和总能量需求分别为20.7 g和0.14 MJ,风力发电机的能量回收期为0.79年.敏感性分析表明,风力发电机的质量和废弃处置阶段的金属回收率都是风力发电机总能量需求和碳足迹的影响因素.     

Preparation of solar-enhanced AlZnO@carbon nano-substrates for remediation of textile wastewaters

Photoactive aluminum doped ZnO(AlZnO) was synthesized by sol-gel method.After that,AlZnO photocatalyst was deposited on five carbon-based materials(CBMs) using ultrasonic route followed by solid-state mixing using ball mill.The CBMs used were poly aniline(PANI),carbon nitride(CN),carbon nanotubes(CNT),graphene(G),and carbon nanofibers(CNF).The crystal phases,elemental compositions,morphological,and optical properties of the AlZnO@CBMs composites were investigated.Experimental results revealed that two of AlZnO@CBMs composites exhibited superior bleaching efficiency(100% removal) and photocatalytic stability(three cycles) for 50 μmol/L Methylene Blue(MB) contaminated water after 60 min irradiation in visible light at pH 6.5,0.7% H_2O_2,and 5 g/L inorganic salts.Under optimum conditions,AlZnO@CBMs nanocomposites were employed for the treatment of mixed dyestuffs composed of MB,Methyl Orange(MO),Astrazone Blue FRR(BB 69),and Rhodamine B(RhB) dyes under dark,ultraviolet,visible,and direct sunlight.For mixed dyestuffs,the AlZnO@G achieved the highest dye sorption capacity(60.91 μmol dye stuffs/g) with kinetic rate 8.22 × 10~(-3) min~(-1) in 90 min via multi-layer physisorption(Freundlich isotherm) on graphene sheet.In additions,AlZnO@CN offered the highest photo-kinetic rate(K_(photo)) of～54.1 × 10~(-3) min~(-1)(93.8% after 60 min) under direct sunlight.Furthermore,the selective radical trapping experiment confirmed that the holes and oxidative superoxide radicals are crucial on dyes photodegradation pathway.Owing to their superior performance,AlZnO@G and AlZnO@CN nanocomposites can offer an effective in-situ solar-assisted adsorption/photocatalytic remediation of textile wastewater effluents.     

基于小光斑激光雷达数据的稀疏林地冠层高程重建

探讨在稀疏林地的条件下,利用小光斑激光雷达获取的多次回波点云数据估算冠层高度,研究不同的高度重建方法包括反距离权重、样条插值以及普通克里格等方法的冠层和地面高度重建的精度。研究发现,在地面和林冠层,不同的重建方法的表现是不一样的,其中样条方法在冠层重建中的精度较高,误差绝对值的平均值为0.95m,并且整体偏差也较小,方差为3.42。而在地面高程重建则是普通克里格方法具有较小的误差,误差绝对值的平均值为0.35m,而样条方法的整体偏差要优于其他两种方法,方差为0.48。经过综合考虑,利用样条方法重建的冠层高程和普通克里格方法重建的地面高程实现了实验区冠层高度的提取。     

城市生态环境可持续评价的两类方法比较

在介绍城市生态环境可持续评价的两种方法的基础上,探讨了相对可持续性评价方法和绝对可持续性评价方法（生态足迹方法）的优点和不足之处,指出了不同方法的适用范围,并着重强调了利用生态足迹方法进行城市生态环境可持续性评价时要注意城市开放生态系统问题,对城市生态环境可持续性评价的实践具有指导意义。     

Long Term Trends in Concentration of Major Pollutants (SO<Subscript>2</Subscript>, CO,NO, NO<Subscript>2</Subscript>, O<Subscript>3</Subscript> and PM<Subscript>10</Subscript>) in Prague – Czech Republic (Analysis of Data Between 1992 and 2005)

To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly averages of PM₁₀, SO₂, NO₂, NO, CO and O₃ from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants of concern showed distinct seasonal trends. The results showed that while SO₂ and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different pattern. PM₁₀ concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone and NO₂ did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted by pollutants from automotive transport (namely PM and NO₂) making the problem of air quality even worse.     

无锡市生态足迹的系统动力学仿真研究

以生态足迹衡量居民对生态资源的需求,构建了包含社会经济、环境、人口、资源子系统的无锡市生态足迹系统动力学模型,分析了各因素对生态足迹系统的驱动作用和相互关系。基于模型预测了无锡市“十二五”期间的生态足迹数值,显示未来5年无锡市的生态足迹将继续呈现递增趋势,反映出居民对生态资源需求和对环境潜在压力不断增大。因此,市政府需重视居民的生态需要,不断改善生态环境,持续推进生态城市建设工作。     

Carbon footprint in corporate logistics operations in the food sector

Global warming is negatively affecting the environment of the planet. This situation has led to the development of international standards, such as the International Organisation for Standardization's DIS 14064‐1 and the Greenhouse Gas Protocol Corporate Standard, both of which measure corporate carbon footprints. These standards provide guidelines that can be applied to different organizational sectors. However, these are not sufficient for controlling the reduction of carbon emissions, because although they propose the use of indicators, they do not explicitly define them. In addition, in the case of emissions from wastewater treatment, they only suggest that the emissions associated with this process be considered. In the present study, an eight‐step, unified methodology based on these two international standards is proposed, focusing on direct emissions. Moreover, the step‐by‐step to data collection, calculations, and the required indicators to control the emissions are defined. The first scope considers direct emissions from sources that are owned or controlled by the company. Methane generation measurement from wastewater treatment has been included in the methodology within Scope 1, as it is the second most polluting gas after carbon dioxide, both of which give rise to global warming. The proposed methodology was tested as a case study in one of the most important companies in the food sector in Colombia.