Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO₃²⁻ increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO₃²⁻, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min⁻¹, being 685% greater than that in the absence of CO₃²⁻ (0.315 min⁻¹). The comparison of dominated active species and 4-MP degradation pathways in both CO₃²⁻-free and CO₃²⁻-containing systems suggested that more CO₃•⁻/¹O₂ was produced in the case of CO₃²⁻deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO₃²⁻ enabled the effective reduction of Cu²⁺ to Cu⁺. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σ_p of the aromatic phenolics and the logarithm of k in the CO₃²⁻-containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.     

The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards

The effects of employing activated Al₂O₃ during the catalytic pyrolysis of waste printed circuit boards (WPCBs) are investigated, focusing on the recycling of light oil. Variations in the pyrolysis process are studied through analysis of the phase distribution, water content and boiling point fractions of the resulting products. Product composition and carbon number distribution are analyzed using gas chromatography techniques. The use of activated Al₂O₃ increases the light oil fraction and also reduces the quantity of brominated products formed. It was determined that the best yield of light oil and most efficient debromination resulted from catalytic pyrolysis at 600 °C. Applying catalyst-to-feed ratios in the range of 1.0–1.5 also maximizes the yield of light oil. The major oil fraction resulting from catalytic pyrolysis has a boiling point range of 0–250 °C and carbon number range of C6–C9, showing for use as a potential fuel after suitable treatment such as hydrogenation. At a higher catalyst-to-feed ratio of 2.0, activated Al₂O₃ generates a high proportion of light oil fractions containing a significant quantity of chemicals such as phenol (52.67% at 600 °C), although an overall lower yield of oil is obtained. The oil produced in this manner may also be used as a raw material feedstock for the production of various other useful chemicals.     

Cu–Mn–Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cu–Mn, Cu–Mn–Ce, and Cu–Ce mixed-oxide catalysts were prepared by a citric acid sol–gel method and then characterized by XRD, BET, H₂-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu–Mn–Ce ternary mixed-oxide catalyst with 1:2:4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu–Mn–Ce catalyst, a portion of Cu and Mn species entered into the CeO₂ fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu–Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu–Mn and Cu–Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.     

Remarkable promotion effect of trace sulfation on OMS-2 nanorod catalysts for the catalytic combustion of ethanol

OMS-2 nanorod catalysts were synthesized by a hydrothermal redox reaction method using MnSO₄ (OMS-2-SO₄) and Mn(CH₃COO)₂ (OMS-2-AC) as precursors. SO₄^2 −-doped OMS-2-AC catalysts with different SO₄^2 − concentrations were prepared next by adding (NH₄)₂SO₄ solution into OMS-2-AC samples to investigate the effect of the anion SO₄^2 − on the OMS-2-AC catalyst. All catalysts were then tested for the catalytic oxidation of ethanol. The OMS-2-SO₄ catalyst synthesized demonstrated much better activity than OMS-2-AC. The SO₄^2 − doping greatly influenced the activity of the OMS-2-AC catalyst, with a dramatic promotion of activity for suitable concentration of SO₄^2 − (SO₄/catalyst = 0.5% W/W). The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), NH₃-TPD and H₂-TPR techniques. The results showed that the presence of a suitable amount of SO₄^2 − species in the OMS-2-AC catalyst could decrease the Mn–O bond strength and also enhance the lattice oxygen and acid site concentrations, which then effectively promoted the catalytic activity of OMS-2-AC toward ethanol oxidation. Thus it was confirmed that the better catalytic performance of OMS-2-SO₄ compared to OMS-2-AC is due to the presence of some residual SO₄^2 − species in OMS-2-SO₄ samples.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

碘酸钾氧化甲基绿褪色光度法测定痕量锡

研究了稀磷酸介质中痕量锡催化碘酸钾氧气甲基绿的褪色反应及动力学条件，建立了高灵敏度测定痕量锡的新催化光度法．方法的灵敏度为２．４×１０－１２ｇ／ｍＬ，线性范围为０～０．１２μｇ／Ｌ．用于人发、水样及矿石中痕量锡的测定，结果满意．     

催化湿式氧化处理机械加工工业废水的研究

利用担载的双金属活性组分催化剂，考察了反应温度、压力、进料空速和污水pH等条件对催化湿式氧化处理某厂机械加工废水效果的影响。对于该厂的混合废水，在反应温度260℃，反应压力6．6MPa，空速为2．0h^-1，pH为3条件下处理后的废水CODCr去除率为90．2％。考察了助剂H2O2、絮凝剂对处理废水效果的影响和各种联用技术对废水的处理效果。     

负载氧化镧的活性炭还原NO的研究

稀土金属具有一些特殊的性能,这使得其对碳质材料还原NO的反应可能表现出特殊的催化效果,而此方面的研究没有报道.为了研究稀土金属对活性炭还原NO反应的催化效果,采用浸渍法制备了负载氧化镧的活性炭颗粒(La/C),并在无氧的固定床反应器中进行了程序升温反应和等温反应,考察了气体流量、NO的入口浓度、反应温度和氧化镧负载量对反应活性的影响,同时对反应机理和动力学进行了初步探讨.研究结果表明负载氧化镧的活性炭还原NO的反应是一级反应.由于炭表面3%(质量分数)的氧化镧的存在,C-NO反应的起始反应温度从500 ℃降低到300 ℃,反应活性大大提高,反应活化能从88.95 kJ/mol降低到51.05 kJ/mol.氧化镧的负载量对反应活性有重要影响,但负载量的大量增加对反应活性的提高效果甚微,最佳负载量为1.5%.La/C体系在反应中较稳定,而反应温度的升高对其稳定性不利.     

微电解-催化氧化-A/O法处理苯硫酚废水

采用微电解—催化氧化—A／O工艺处理苯硫酚生产废水，结果表明，该工艺对CODcr、石油类、挥发酚、苯、甲苯各项污染物指标均有较好的去除效果，整个工艺运行稳定。只要控制好各个处理环节，出水水质能达到国家一级排放标准。     

活性炭-双氧水催化氧化法深度处理DSD酸废水的研究

以活性炭为催化剂、H2O2为氧化剂的催化氧化技术来处理DSD酸母液树脂吸附出水。处理效果比单纯的活性炭吸附或H2O2氧化要好的多。在温度25℃，线速度0．10m／h，pH3．50，H2O2添加量0．35％，处理500mL水样后，脱色率达到90%以上，TOC去除率达到40．0％以上。