纤维改性硫酸亚铁还原铬渣水泥固化体研究

以浸出毒性、表面浸出率、抗日晒能力和抗压强度为指标考察了纤维改性硫酸亚铁还原铬渣水泥固化体的性能。实验结果表明：纤维改性硫酸亚铁还原铬渣水泥固化体养护7d和28d后的浸出毒性均低于国家标准、抗压强度均大于10MPa,可以做最终处置或进行综合利用;与普通铬渣水泥固化体相比,纤维改性硫酸亚铁还原铬渣水泥固化体在加入植物纤维为0．8g时的处理效果最好,浸出毒性、表面浸出率分别降低了76．I％和76．8％;抗日晒能力、抗压强度分别提高了36．4％和52．1％。     

环保PPP的八维变量分析及在重金属污染治理中的应用

对PPP应用的主要领域做了分析,并对市政环保领域利用"八维变量分析法"进行了研究,分别从资产条件、项目条件、经营条件3个方向对投资强度、资产沉淀性、资产变现、供应预期、边界清晰度、付费模式、经营增值空间和公益偏见八个变量展开研究,对重金属治理的PPP应用进行了分析,提出重金属治理PPP领域主要存在于环境监测与检测、末端治理和环境修复市场。     

Safety,reliability and worker satisfaction during organizational change

The research presented in this paper was carried out in four process industry plants in the Netherlands, to identify factors that have the potential to increase safety and reliability while maintaining or improving job satisfaction. The data used were gathered as part of broader trajectories in these firms, aiming at the simultaneous improvement of productivity and safety, while maintaining or improving worker satisfaction. The results show that participative leadership is crucial for combining an increase in safety and reliability with job satisfaction. Participative leadership has a positive effect on job satisfaction and through proper maintenance also on the prevention and absence of disturbances and on the reliability of the production process. The results of this research show the importance of participative leadership for safety, reliability and worker satisfaction, especially during organizational change. Other important factors are operator competences, teamwork, proper handling of variance and disturbances, and proper maintenance. It also confirms that apart from technological factors associated with proper maintenance, people and team related factors are important for increasing safety and reliability in the process industry, especially for being prepared for disturbances and to be able to cope adequately with them.     

Techno-Economic Study of CO2 Capture from an Existing Cement Plant Using MEA Scrubbing

Carbon dioxide is the major greenhouse gas responsible for global warming. Man-made CO₂ emissions contribute approximately 63% of greenhouse gases and the cement industry is responsible for approximately 5% of CO₂ emissions emitting nearly 900 kg of CO₂ per 1000 kg of cement. CO₂ from a cement plant was captured and purified to 98% using the monoethanolamine (MEA) based absorption process. The capture cost was $51 per tonne of CO₂ captured, representing approximately 90% of total cost. Steam was the main operating cost representing 39% of the total capture cost. Switching from coal to natural gas reduces CO₂ emissions by about 18%. At normal load, about 36 MW of waste heat is available for recovery to satisfy the parasitic heat requirements of MEA process; however, it is very difficult to recover.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

定型机废气中油烟监测方法探讨

印染行业中定型机废气的主要污染物之一是其中的工业油烟,由于当前我国没有工业油烟排放监测分析的国家标准,在实际监测过程中主要参照饮食业油烟的监测方法,但是工业油烟和饮食业油烟之间存在性质等方面的较大差异,导致两者在监测过程中也存在区别。通过对定型机排放废气中油烟多次监测分析,探讨在当前条件下,符合定型机废气中油烟监测的方法。     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

水泥工业生产废水治理及回用技术探讨

本文通过具体工程实例对水泥生产废水处理回用工程可行性、经济性等进行探讨,并提出切实可行的工艺流程,即：无机混凝剂（PAC）＋高分子助凝剂（PHM）的混凝沉淀处理工艺。     

推进工业领域污染防治的实施战略研究

通过对工业污染防治面临的主要问题以及未来工业绿色发展态势和国家环境保护严峻形势进行深入分析,指出"十三五"是中国工业面临转型升级的重要战略机遇期,并重点从推动生产方式绿色化、发展节能环保产业、推进清洁生产和循环经济、强化污染防治力度等方面提出了工业行业在推进污染防治工作中的总体思路和发展战略。