工业-环境系统可持续发展定量研究

应用系统论分析了工业－环境系统内部相互作用的特征,建立了工业－环境系统可持续发展的定量判据。对区域工业－环境可持续发展问题进行了定量研究。     

A Special Vegetation Index for the Weed Detection in Sensor Based Precision Agriculture

Many technologies in precision agriculture (PA) require image analysis and image- processing with weed and background differentiations. The detection of weeds on mulched cropland is one important image-processing task for sensor based precision herbicide applications. The article introduces a special vegetation index, the Difference Index with Red Threshold (DIRT), for the weed detection on mulched croplands. Experimental investigations in weed detection on mulched areas point out that the DIRT performs better than the Normalized Difference Vegetation Index (NDVI). The result of the evaluation with four different decision criteria indicate, that the new DIRT gives the highest reliability in weed/background differentiation on mulched areas. While using the same spectral bands (infrared and red) as the NDVI, the new DIRT is more suitable for weed detection than the other vegetation indices and requires only a small amount of additional calculation power. The new vegetation index DIRT was tested on mulched areas during automatic ratings with a special weed camera system. The test results compare the new DIRT and three other decision criteria: the difference between infrared and red intensity (Diff), the soil-adjusted quotient between infrared and red intensity (Quotient) and the NDVI. The decision criteria were compared with the definition of a worse case decision quality parameter Q, suitable for mulched croplands. Although this new index DIRT needs further testing, the index seems to be a good decision criterion for the weed detection on mulched areas and should also be useful for other image processing applications in precision agriculture. The weed detection hardware and the PC program for the weed image processing were developed with funds from the German Federal Ministry of Education and Research (BMBF).     

Sustainable Water Resources Management in a Conflict Resolution Framework1

Abstract: A decision support system for sustainable water resources management in a water conflict resolution framework is developed to identify and evaluate a range of acceptable alternatives for the Geum River Basin in Korea and to facilitate strategies that will result in sustainable water resource management. Working with stakeholders in a “shared vision modeling” framework, sustainable management strategies are created to illustrate system tradeoffs as well as long‐term system planning. A multi‐criterion decision‐making (MCDM) approach using subjective scales is utilized to evaluate the complex water resource allocation and management tradeoffs between stakeholders and system objectives. The procedures used in this study include the development of a “shared vision model,” a simulated decision‐making support system (as a tool for sustainable water management strategies associated with water conflicts, management options, and planning criteria), and the application of MCDM techniques for evaluating alternatives provided by the model. The research results demonstrate the utility of the sustainable water resource management model in aid of MCDM techniques in facilitating flexibility during initial stages of alternative identification and evaluation in a basin suffering from severe water conflicts.     

木材在线性增长热流下着火的复合判据研究

为探索木材在热流变化时的着火特点并提出着火判据,通过试验研究了木材在线性增长热流条件下的自发着火性能,测定了泡桐、椿木、榆木和刺槐4种木材的点燃时间、木材表面的入射热流以及试样内部的温度.结果表明.当热流增长率大于等于0.199kw/(m~2·s)时,试验的所有木材均可以被点燃,点燃这些木材的临界热流增长率介于0.065～0.103 kw/(m~2·s).建立了木材着火的计算模型,计算得出木材自发着火时的表面温度约为500℃.根据试验和计算的结果提出了-结合表面温度和临界热流增长率的木材自发着火复合判据.     

影响大型复杂机械钢结构系统可靠性的因素分析

以结构力学为理论依据,以有限单元法为基础,借助和参考有关有限元程序设计方法,按照结构系统可靠性失效模式分析的要求,采用编程语言研制成功基于有限元的可靠性分析软件RAPS(Reliability Analysis Program of Structure based on FEM),运用该软件对立体车库钢结构的可靠性进行具体的分析;对判定结构系统失效与否的失效准则进行讨论和分析,并针对立体车库钢结构,得出合理的失效准则和系统可靠度的计算方法;通过实例说明约界参数CAP、失效路径长度和系统复杂程度对失效准则和系统可靠度结果的影响。     

地下管线工程地震破坏等级划分标准

简要介绍了地下管线工程的地震破坏特点及类型，搜集整理了国内外地下管线工程地震破坏等级划分标准方面的有关标准、规定，对不同标准、规定进行了评述，在此基础上，以整个管网系统为评定对象，主要考虑管段破坏程度和单位长度管线破坏处数两个因素，将管网系统地震破坏细划为基本完好、轻微破坏、中等破坏、严重破坏及毁坏5个等级，给出了一套新的地下管线工程地震破坏等级划分标准。     

基于Seam型裂纹的复合型裂纹起裂角预测的有限元法

目的对处于多轴应力状态下的复合型裂纹起裂角进行预测。方法考虑材料的弹性性能,利用商业有限元软件ABAQUS中的Seam裂纹模拟穿透型裂纹损伤,建立双轴载荷作用下中心带孔边裂纹板的三维有限元模型,通过位移外推法得到裂纹尖端的应力强度因子(Stress Intensity Factor,SIF),并利用求得的SIF基于最大周向应力断裂准则预测孔边裂纹的起裂角。结果通过与相关文献结果进行对比,发现通过该有限元方法计算得到的应力强度因子与文献结果的最大误差在2%以内,预测的裂纹起裂角与文献结果的最大误差在3%以内。结论该有限元方法计算的裂纹起裂角与文献结果一致,因此文中求解复合型裂纹起裂角所使用的有限元方法是可靠有效的。     

Model-based zero emission safety concept for reactors with exothermal reactions for chemical plants

To avoid major accidents caused by runaway reactions, a new safety concept called SmartHIP¹ is introduced, with the objective to prevent runaway reactions and avoid emissions. The basic principle is based on an online model-based approach by using safety instrumented systems. Different criteria exist for calculating the hazard potential of a runaway reaction and its early detection. The approaches of the literature from the last years are analysed and divided into three different groups: Divergence, Accumulation and Adiabatic Criterion. Each approach is compared to the other by applying it to an esterification reaction of acetic anhydride with methanol. The approaches are evaluated according to different requirements, like accuracy, wide range of application or reliability.     

自然环境谱编制方法研究

针对装备(产品)在服役过程中所遭受的自然环境开展了自然环境谱编制方法研究,给出了自然环境谱的定义和编制程序,提出了盐雾和工业废气环境的判定标准,制定了适用于我国各种大气环境场地自然环境谱的编制方法,并举例编制了某地域的自然环境谱.     

A review on hybrid mixture explosions: Safety parameters,explosion regimes and criteria,flame characteristics

The hybrid mixture of combustible dusts and flammable gases/vapours widely exist in various industries, including mining, petrochemical, metallurgical, textile and pharmaceutical. It may pose a higher explosion risk than gas/vapor or dust/mist explosions since the hybrid explosions can still be initiated even though both the gas and the dust concentration are lower than their lower explosion limit (LEL) values. Understanding the explosion threat of hybrid mixtures not only contributes to the inherent safety and sustainability of industrial process design, but promotes the efficiency of loss prevention and mitigation. To date, however, there is no test standard with reliable explosion criteria available to determine the safety parameters of all types of hybrid mixture explosions, nor the flame propagation and quenching mechanism or theoretical explanation behind these parameters. This review presents a state-of-the-art overview of the comprehensive understanding of hybrid mixture explosions mainly in an experimental study level; thereby, the main limitations and challenges to be faced are explored. The discussed main contents include the experimental measurement for the safety parameters of hybrid mixtures (i.e., explosion sensitivity and severity parameters) via typical test apparatuses, explosion regime and criterion of hybrid mixtures, the detailed flame propagation/quenching characteristics behind the explosion severities/sensitivities of hybrid mixtures. This work aims to summarize the essential basics of experimental studies, and to provide the perspectives based on the current research gaps to understand the explosion hazards of hybrid mixtures in-depth.