Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．     

Sorption of pyrene on two paddy soils and their particle-size fractions

In the present study, the sorption of pyrene on two kinds of bulk paddy soils, Gleyic Stagnic Anthrosols, and Ferric accumulic Stagnic Anthrosols as well as their particle-size fractions was investigated. The sorption isotherms fitted well with Freundlich equation. For both soils, the clay fraction（ 〈 2μm） and coarse sand fraction（2000-250μm） had higher sorption capacity than fine sand fraction（250-20 μm） and silt fraction（20-2 μm）. The IogKoc values obtained of each soil and its particle-size fractions were similar, proving that SOM content was a key factor affecting pyrene sorption. The Kd values showed a significant correlation with contents of dithionite-extractable Fe in both paddy soils and a good relationship with CEC in Gleyic Stagnic Anthrosols, indicating possible effects of surface properties of particle-size fractions on the sorption of pyrene.     

化学絮凝—SBR法处理味精废水的研究

利用化学絮凝联用 SBR法对味精废水进行处理 ,该方法比较符合味精生产厂家的实际并取得了较好的初步结果     

上海市大气颗粒物高浓度区污染物的源解析

应用受体模式的化学质量平衡法支９个监测点的大气颗粒物进行污染源的源解析，得出这９个监测点的各类污染源平均贡献率为建筑尘占３２．１％，土壤尘占２７．５％，钢铁尘占２４．９％，燃煤尘占１４．８％，汽车尘和燃油尘分别占０．２％和０．４％。     

硝基苯废水治理技术研究进展

综述了近年来硝基苯废水治理方法的研究进展．介绍了物理法、化学法和生物法在治理硝基苯废水中的不同作用，指出物化法与生物法相结合会成为根治硝基苯废水的理想方法。     

HBCOD-1型COD在线自动监测仪的应用

介绍了HBCOD-1型COD在线自动监测仪的测定原理、分析流程和性能特点。仪器采用重铬酸钾氧化水中有机物和还原性无机物，通过分光光度法测定水中化学耗氧量（COD值）。与国标方法进行线性回归校正后，仪器测定值与国标方法测得的CODCr，值具有较好的一致性。     

含CM,TMP及SMZ的化学合成制药废水研究

含有氯霉素(CM)、抗菌素增效剂(TMP)和磺胺新诺明(SMZ)的合成制药废水对生物处理有较强的抑制作用.研究表明,通过对厌氧菌和好氧菌的驯化、筛选和复配采用吹脱-厌氧-好氧串联工艺可有效降低废水的有机污染指标:经吹脱和厌氧水解酸化处理后,CODCr去除率为70%,再经好氧生化系统处理,CODCr去除率可达60%.试验结果表明装置运行效果稳定,为实际废水处理提供了一定设计依据.     

水中化学耗氧量的快速测定法

利用烘箱法测定水中的化学耗氧量是国内外在微量分析测定方法上较为先进的分析，优点是仪器、设备简便、操作简单、分析快速、节省大量化学试剂，可以大批量地进行试验．实验中不加入硫酸汞试剂，避免或减少了汞污染．方法的空白值较好，提高了实验的精密度和准确度，是一种易推广的方法     

胰岛素废水处理工程设计

针对某医药公司在制取胰岛素过程中产生的高浓度废水，采用预处理（酒精回收-盐水投配-除油）-倒A2O-接触氧化-化学除磷组合工艺进行调试，其处理效果明显，出水各项指标均能达标，同时对工艺中存在的缺陷进行了分析。