染料废水的治理现状及展望

介绍了染料废水的处理现状,目前国内外主要的处理方法有物化法(常用的有吸附法、混凝法、膜技术等)、化学法(如氧化法、电解法等)和生化法(投菌法微生物降解,好氧/厌氧工艺),介绍了各种工艺方法处理染料废水的实例并指出了各方法的优缺点和技术的关键,最后对今后染料废水处理技术的发展进行了展望。     

MAP法处理氨氮废水最佳条件的研究

MAP法是一种比较新颖有效的处理氨氮的方法，该方法是通过化学沉淀的方式使废水中的氨氢浓度降到很低。而且沉淀反应不受温度、水中毒素的限制。由单项试验以及正交实验的方法对MAP法处理氨氮废水的工艺进行优化研究，结果表明，在pH=8.5，反应时间为3h,Mg:N:P=1:3:1.0:1.1时为较佳反应条件；氨氮的去除率随着反应时间的增加而增加，随着Mg:N比值的增加而增加。     

Environmental aftermath of the radiation accident at Tomsk-7

An analysis is presented of the environmental effects of the most serious radiation accident recorded after Chernobyl, which occurred in the formerly secret town of Tomsk-7 in Siberia, Russia, on 6, April 1993. Fortunately, it appears not to have become a major industrial crisis or disaster. The causes of the accident are described. It is argued that a mixture of both objective and subjective prerequisites, including specific human, organizational, and technological factors, were responsible for the explosion or directly facilitated it. The Tomsk-7 accident's ecological, medical, social, and psychological consequences are discussed.     

用伴随方法对毒气泄漏事件进行危害评估

由于自然、人为等因素造成的有毒气体泄漏事件随时威胁着人们的生命安全。对于这类突发事故进行危害评估 ,在应急救援中 ,可以给决策者提供参考 ,使之采取有效措施 ,最大限度地降低事故危害程度 ,减少事故恶果及引起的恐慌。由于毒气泄漏位置事先无法确定 ,如果用常规方法进行逐点评估 ,将面临着巨大的计算量而难以进行。笔者发展了一种伴随方法 ,对风险函数的表达式进行等价变形 ,通过求解伴随方程 ,可以一次求得任意位置的毒气泄漏的风险值 ,大大降低计算量和工作量。此法在化学工厂和仓库设置 ,煤气网铺设和监测点选取 ,城市应急中心设置等多种安全规划中均有重要价值 ,为快速危害评估 ,降低化学事故危害提供了有力的研究工具和实用方法。     

火灾烟气中有毒气体的体积分数分布与危害

研究火灾烟气的成分与其体积分数分布是火灾科学的一项重要内容。为了更好地研究建筑火灾烟气的释放过程并为建筑材料评价提供依据，采用文献综述的方法论述了建筑火灾烟气的主要有毒成分、体积分数范围(即浓度范围)与危险含量(即危险浓度)，还介绍了常用的烟气分析方法，说明了对火灾烟气的产生机理和火灾烟气成分的检测方法等还需要进行深入的研究。     

City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Comparative analysis of anaerobically digested wastes flow properties

The flow curve of anaerobically digested wastes from different origins was determined through rheological measurements. Regardless of their origin, samples can be divided into two families: simple non-Newtonian liquids well modelled by basic power law below 10%DC and viscoelastic liquids with a yield stress, well modelled by a Herschel–Bulkley model above. In all the cases, the rheological behaviour is driven by both the organic content and the volatile fraction (organic content/solid content), indicating that anaerobic digestion tends to smooth the rheological characteristics of organic wastes, whichever their origins.     

水铁矿及其胶体对砷的吸附与吸附形态

采用吸附实验,通过吸附动力学和吸附等温模型,研究了水铁矿及其胶体对As(Ⅲ)和As(Ⅴ)的吸附能力.在此基础上,使用连续提取和As化学形态提取技术分别对水铁矿及其胶体固相上吸附As的结合形态和化学形态进行提取分析.吸附动力学研究以及Langmuir和Freundlich两种吸附等温模型拟合结果表明,水铁矿及其胶体对As的吸附为多层吸附,且易于进行.水铁矿胶体对As(Ⅲ)和As(Ⅴ)的吸附量分别为194.8 g·kg~(-1)和107.3 g·kg~(-1),而水铁矿对As(Ⅲ)和As(Ⅴ)的吸附能力分别为155.2 g·kg~(-1)和104.4 g·kg~(-1),均低于水铁矿胶体.水铁矿及其胶体吸附的As以专性吸附As、无定形铁氧化物结合As和晶型铁氧化物结合As形式存在,胶体上未形成残渣态As.因此,水铁矿胶体吸附As的牢固程度低于吸附As后形成残渣态As的水铁矿,且所吸附的As容易重新释放到环境中,增加环境风险.水铁矿单独存在时不具有将As(Ⅴ)还原为As(Ⅲ)的能力.     

缙云山土地利用方式对土壤轻组及颗粒态有机碳氮的影响

选取缙云山阳坡同一海拔处亚热带常绿阔叶林(以下简称林地)、果园、坡耕地和撂荒地这4种不同土地利用类型,在0~60 cm深度内每隔10 cm采集一个土样,测定土壤轻组有机碳氮(LFOC、LFON)和颗粒态有机碳氮(POC、PON)含量,并计算其分配比例和碳氮比.结果表明,在0~60 cm土壤深度范围内,林地转变为坡耕地后,LFOC及LFON含量分别降低了71.42%和38.46%(P0.05),转变为果园后变化不明显,坡耕地撂荒后其含量分别升高了3.77倍和1.38倍(P0.05);林地转变为坡耕地或果园后,POC及PON含量均无明显变化,而坡耕地撂荒后其含量分别增加了4.12和1.25倍(P0.05).林地转变为坡耕地后土壤LFOC及LFON分配比例显著降低,转变为果园后则明显升高,而POC及PON分配比例变化均不明显;坡耕地撂荒后,LFOC、LFON、POC、PON分配比例均显著增加.土壤SOC/TN为撂荒地(12.93)林地(8.53)果园(7.52)坡耕地(4.40),LFOC/LFON为撂荒地(16.32)林地(14.29)果园(11.32)坡耕地(7.60),POC/PON为撂荒地(23.41)坡耕地(13.85)林地(10.30)果园(9.64).以上研究结果表明林地开垦为果园或坡耕地后容易导致土壤轻组有机碳氮的损失,而坡耕地撂荒则有利于土壤活性有机碳氮的积累;林地转变为坡耕地减弱了土壤有机碳氮的活性,而林地转变为果园以及坡耕地撂荒均使土壤有机碳氮活性增强;林地转变为坡耕地和果园加剧了土壤有机质的矿化,相对而言,坡耕地撂荒后有利于土壤有机质的固定.