宜昌市工业企业循环经济发展现状及对策

针对宜昌市工业企业循环经济的发展和环境保护现状,分析了工业企业推进循环经济过程中存在的主要问题,并从加强和完善内驱动力、激励机制、政策法规、宣传教育等方面提出了加强循环经济建设和环境保护的对策。     

Acute effects of chlorpyryphos-ethyl and secondary treated effluents on acetylcholinesterase and butyrylcholinesterase activities in Carcinus maenas

The acute effects of commercial formulation of chlorpyrifos-ethyl (Dursban(r)) and the secondary treated industrial/urban effluent (STIUE) exposure on acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE) activities in hepatopancreas and gills of Mediterranean crab Carcinus maenas were investigated. After 2 d of exposure to chlorpyriphos-ethyl, the AChE activity was inhibited in both organs at concentrations of 3.12 and 7.82 μg/L, whereas the BuChE was inhibited only at higher concentration 7.82 μg/L of commercial preparation Dursban(r). The exposure of crabs to Dursban(r) (3.12 μg/L) showed a significant decrement of AChE activity at 24 and 48 h, whereas the BuChE was inhibited only after 24 h and no inhibition for both enzymes was observed after 72 h. Moreover, a significant repression of AChE activity was observed in both organs of C. maenas exposed to 5% of STIUE. Our experiments indicated that the measurement of AChE activity in gills and hepatopancreas of C. meanas would be useful biomarker of organophosphorous (OP) and of neurotoxic effects of STIUE in Tunisia.     

化肥污染与防治

随着农业发展,化肥的用量越来越大,大量化肥进入环境中,必然对环境造成污染。本文着重探讨化肥对水、空气、土壤及人畜的污染及危害,提出防治化肥污染的措施。     

富营养化水体中微囊藻毒素（MCs）去除技术研究进展

当前,随着工业的发展水体富营养化程度日益严重。引起富营养化的主要藻类一蓝藻,能够释放对人体及鱼类具有多器官毒性、遗传性和致癌性的毒素——微囊藻毒素（MCs）。MCs治理技术种类繁多,传统的物理法如：混凝沉淀、膜过滤、活性炭吸附、气浮以及直接过滤只能对简单的处理细胞内的MCs;化学氧化法、光催化氧化法以及高级氧化法虽然能有效处理水体中的MCs．但有成本高、易二次污染和操作复杂等缺点,难以满足日益严格的环保要求;生物酶法除了具有生物降解法所具有的廉价、无二次污染、降解彻底和易操作等特点外,还被刺用来监控水体中MCs,它将成为今后重点研究的技术领域．     

1991～2007年昆明市工业污染物排放状况分析与研究

通过对1991～2007年间昆明市工业污染物排放状况的分析,对未来污染物排放进行了预测,提出了降低工业污染物排放的几点对策。     

火电湿法烟气脱硫塔模拟及优化操作分析

基于火电石灰石-石膏湿法烟气脱硫工艺,以华能福州电厂实际生产数据为依据,经对设备分别简化建模,建立了反映实际脱硫过程的脱硫塔模型,形成全工艺模拟流程,模型计算结果和实际运行数据间平均误差为0.4364%.对脱硫工艺过程进行灵敏度分析,得出循环浆液pH值、烟气流量、液气比等因素对吸收效率的影响.最后,以灵敏度分析结论为基础,借助多目标优化方法分析不同工况下各控制因素对脱硫效率的影响,得到基本优化控制范围(pH值处于5.4～5.6、烟气压力处于0～1000Pa)和相应的最优控制方案,并分析了优化操作结果的工业适用性.     

大连市水泥产业结构调整与节能减排工作探索

综述了大连市政府根据水泥工业自身的发展形势和需要,作出了关闭全市所有非新型干法生产工艺的中小型水泥厂29家的重大抉择,完成了540万t落后水泥产能淘汰任务,取得了削减烟、粉尘排放量1123万t的效果：介绍了大连市水泥工业在节能减排方面的一些具体做法;展望了利用水泥工业“新陈代谢”的特点,节约能源资源、大力发展循环经济的发展趋势,并对节能减排工作进行了探索。     

活性炭再生及其在水处理中的应用

活性炭的再生方法有很多,如热再生法、生物再生法、化学溶液再生法、湿式氧化再生法、超临界萃取再生法、电化学再生法、超声波再生法、微波辐照再生法等。不同的方法有不同的特点适用于不同的工业废水处理。     

基于微观模拟的企业排污强度差异及区域特征

同一工业行业内的企业存在排污强度个体差异,从数量有限的企业环境统计数据得出行业平均排污强度,并用其代表该行业在区域层面的经济-环境水平,会带来一定偏差.因此以嵌入环境消耗投入的生产函数为基础,建立了企业运营决策的微观模拟模型,从机制上描述企业排污强度的差异.以2005年德阳市机械制造行业为案例,对模型的相关参数进行了率定,使其较好地描述了2005年环境统计口径内各企业的COD排放强度.模型的计算结果表明,由环境统计口径内企业计算的区域平均COD排放强度(万元固定资产排放0.002 6 t,万元工业产值排放0.001 5 t)小于由区域内全部企业计算的区域平均COD排放强度(万元固定资产排放0.003 0 t,万元工业产值排放0.002 3 t),市域内6个县级行政区的排污强度也体现出了明显差异.以上的排污强度区域特征主要源自行业内部结构(企业的规模分布,技术分布),及其空间差异.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.