Regionalisation and sustainability in the field of industrial production

SUMMARY

Regional business concepts are said to have huge potential to support sustainable development in industrialised countries (e.g. Stransfeld, 1999). However, whereas efforts have been made to implement regional concepts within agriculture and forestry, empirical findings show that regional concepts are only of minor importance to managers within industrial production (Rentz et al., 2000). Considering this situation, the aim of the present article is to explain why regional business concepts have rarely been implemented in the field of industrial production. Therefore, in the course of the present article, a raster for the identification of relevant barriers on a personal, enterprise, inter-firm and macroeconomic level will be developed and applied. Subsequently, suggestions for a set of measures to overcome these barriers to regionalisation will be given. The results have been identified in the framework of a questionnaire to about 30 decision makers of industrial companies within research, a project promoted by the German Ministry of Education and Research.     

Effect of iron addition on the performance of anoxic-oxic membrane process and biological phosphorus removal北大核心CSCD

In order to solve the problem of poor treatment of phosphorus in membrane bioreactor (MBR) with long sludge retention time (SRT), a ferric salt was added to enhance phosphorus removal; FeCl36H2O (Fe/P = 2.0) was added to the reactor. The removal efficiency of nitrogen, organic matters, and phosphorus in the MBR was investigated systematically. Moreover, this study focused on the membrane performance, the change of active sludge flora, and the effect of adding a ferric salt on membrane fouling before and after the addition. It was seen that adding the ferric salt could not affect the removal of COD and NH4 +-N and the removal rate of COD and NH4 +-N reached over 90%. However, the average removal rate of phosphorus was 52%, while the removal rate increased by nearly 40% after adding the ferric salt. The effects of adding ferric salts on the dominant bacteria and biological phosphorus removal of activated sludge were further studied. The results showed that the addition of ferric salt (Fe/P = 2.0) decreased the diversity of active sludge flora and relative abundance of some phosphorusaccumulating organisms and had a negative effect on biological phosphorus removal. The analysis of transmembrane pressure difference (TMP) recording revealed that the concentration of iron salts did not exacerbate membrane fouling. The results showed that the concentration of iron salts entering the membrane bioreactor would reduce the relative abundance and phosphorus removal efficiency of the activated sludge in the system to a certain extent, but it had no obvious effect on membrane fouling. It allowed the effluent to attain acceptable standards, especially with respect to phosphorus removal efficiency. © 2018 Science Press. All rights reserved.     

江苏省工业化进程中的环境效应分析

工业化快速进程中．工业污染作为工业生产在所难免的附属产物．占全国总污染负荷的70％．对资源环境构成巨大压力。经济发达地区工业产值占据了国民经济的半壁江山．使得工业结构与布局成为影响生态环境质量的主要驱动因子。本文首先以江苏省为例．分析重污染行业结构与工业布局变动对环境效应的实际效果．得出重要结论：自1990年以来工业结构与布局调整不利于环境污染控制。从生产效应和社会效应两个方面．分析工业化进程中的环境效应影响机理．通过对江苏省的实证分析．结果证实工业结构与布局是现阶段景影响环境污染的重要变量。重污染行业结构是环境效应的主要影响因素。加快工业结构调整步伐、进一步优化工业布局．着力于从工业结构调整和工业布局变动趋势中获得改善环境质量的机遇和动力是摆脱环境与发展困境的有力手段。     

长江经济带工业污染排放空间分布格局及其影响因素

长江经济带发展强调"不搞大开发,共抓大保护"战略,长江生态环境修复成为该地区发展的重要内容,因此探明长江经济带工业污染排放空间分布格局及其影响因素具有重要意义.选取2013~2017年长江经济带102个城市的工业SO₂、工业废水以及工业烟粉尘排放量作为基础数据,运用空间自相关分析和冷热点分析方法（Getis-Ord Gi^*）,揭示了长江经济带工业污染排放空间分布格局;采用对数平均迪氏分解模型（logarithmic mean Divisia index,LMDI）对长江经济带工业污染排放的影响因素进行分解.结果表明,2013~2017年长江经济带的工业SO₂、工业废水以及工业烟粉尘排放量呈降低趋势,高排放城市减少,低排放城市增多;各工业污染物随时间变化,空间关联程度增强;技术改善对工业污染排放有显著抑制作用,是影响长江经济带工业污染排放的最主要因素.     

工业源VOCs污染防控对策案例研究

挥发性有机物(VOCs)已经与氮氧化物(NOx)、颗粒物等成为我国典型城市群的主要大气污染物,其中工业源VOCs排放量大,是珠江三角洲地区影响最大的一类VOCs排放源。由于VOCs种类繁多,来源及转化生成臭氧的机制复杂,为解决此类复杂的VOCs污染问题,文章以东莞市作为珠三角典型区域代表,归纳总结了VOCs防控措施,分析了工业源VOCs治理的难点,有针对性地提出相关的有效对策建议,以期为大气环境质量管理和决策提供有益帮助,也为全国其他城市的VOCs污染防控提供借鉴。     

国际标准产业分类体系的供水、污水处理、废物管理和补救活动的分类演化及启示

国际标准产业分类体系是目前国际上最有影响、最有权威的产业分类体系。深入了解国际标准产业分类体系中供水、污水处理、废物管理和补救活动分类演化,对正确收集、处理和测算供水、污水处理、废物管理和补救活动的指标以及国际间数据比较至关重要。论文首先详细地剖析了国际标准产业分类体系的供水、污水处理、废物管理和补救活动的分类演化,然后依据国际标准产业分类体系的最新变化,结合我国供水、污水处理、废物管理和补救活动现状,为我国国民经济行业分类中供水、污水处理、废物管理和补救活动的修改和调整提供改进建议。     

集成内循环烟气流化床脱硫塔内流动特性

针对脱硫塔内烟气的偏流问题,提出了直导流板加旋流结构的措施,应用CFD软件包FLUENT平台对导流板的尺寸、位置、数量进行了优化,得到了烟气入口调节的优化方案。通过工业流场试验对数值计算结果进行了验证,结果表明:采用烟气调节措施后,流场均匀性得到明显的提高。计算和工业试验数据一致,表明采用合适的计算模型,数值计算能取得良好的模拟结果。     

基于生态承载力的成都产业空间布局研究

以成都市的20个行政区县为基本评价单元进行生态承载力评价,在此基础上进行产业空间布局研究. 结果表明:成都市的生态承载力空间分布存在明显差异,呈从山区—丘陵—平原依次递增、从流域源头—末端依次递增的规律. 根据不同单元生态承载力的空间和阈值差异,将成都产业空间布局划分为4个类型区,即重点发展区、引导发展区、限制发展区和保护发展区;针对不同类型区的特征,制订产业准入门槛、产业规模和产业发展方向等产业发展调控策略.      

Participative Versus Assigned Production Standard Setting in a Repetitive Industrial Task: A Strategy for Improving Worker Productivity

Abstract

The participative standard with feedback condition was superior to the assigned difficult (140% of normal) standard with feedback condition in terms of worker productivity. The percentage increase in worker productivity with the participative standard and feedback condition was 46%, whereas the increase in the assigned difficult standard with feedback was 23%, compared to the control group (no standard, no feedback). Worker productivity also Improved significantly as a result of assigning a normal (100%) production standard with feedback, compared to the control group, and the increase was 12%. The participative standard with feedback condition emerges as the optimum strategy for improving worker productivity in a repetitive industrial production task.     

Security Risk Assessment Methodology for the petroleum and petrochemical industries

The American National Standards Institute (ANSI)/American Petroleum Institute (API) Standard 780 Security Risk Assessment (SRA) Methodology was published in June 2013 as a U. S. standard for security risk assessments on petroleum and petrochemical facilities. The standard represents a model standard for evaluating all security risks of petroleum and petrochemical infrastructure and operations and assists industries in more thoroughly and consistently conducting SRAs. The 2013 Standard is an update from the previous API/NPRA SRA Methodology (2004) and focuses on expanding functional utility without changing the basic methodology.The methodology can be applied to a wide range of assets even beyond the typical operating facilities of the industry. This includes refining and petrochemical manufacturing operations, pipelines, and transportation operations including truck, marine, and rail, as well as worker and executive security, housing compounds, and remote operational sites. The new standard describes the most efficient and thorough approach for assessing security risks widely applicable to the types of facilities operated by the industry and the security issues they face. It is voluntary but has been adopted by the Kingdom of Saudi Arabia Ministry of Interior High Commission for Industrial Security as the mandatory security risk assessment methodology for industrial facilities.This paper examines the key elements of the ANSI/API SRA process and discusses how forward thinking organizations may use risk-based performance metrics to systematically analyze facility security postures and identify appropriately scaled and fiscally responsible countermeasures based on current and projected threats. The AcuTech Consulting Group developed the methodology under contract to the API, and the author was the project manager for the project.