化工园区地下水环境状况调查监测布点研究

借鉴环境风险源目标管理的理念,按照“分区、分类、分级”监测的原则,建立了化工园区地下水环境状况调查监测布点方法体系,并以某化工园区为示例展开应用研究。结果显示,该方法能对化工园区不同区域、不同类型、不同级别的地下水污染源构建差异化监测网络,解决化工园区地下水污染多元化监测布点问题,可为化工园区地下水环境状况调查监测布点方案的拟定或优化调整提供工作参考。     

火焰脉动在火灾领域相关研究进展

为研究火焰脉动在火灾领域相关研究进展,总结了不同燃料类型的火焰脉动形成机理,较为详细地介绍了火焰脉动现象研究中常用的脉动频率测量方法,列举了LDV、TDLAS、自由基团高频采集等新方法;介绍了池火脉动、射流/羽流气体火脉动在不同燃烧器尺寸,不同外部环境和不同燃料比等影响因素方面的研究内容与进展;对常见的3种不同的火焰脉动模型进行描述和归类;对火焰脉动的规律、机理等在火灾领域的早期识别和检测中的作用、特殊条件对于火焰脉动频率的影响和更加精细的火焰脉动模型的研究等方向提出展望。     

晋牛矿1303综放面采空区注氮方案研究及数值模拟

为了合理设计采空区注氮防灭火方案,以晋牛煤矿1303综放工作面为研究对象,通过在采空区进、回风侧布置束管监测系统,连续测定采空区气体浓度变化,划分采空区自燃“三带”分布区域,并基于采空区自燃“三带”划分标准和数值模拟的方法,利用流体力学COMSOL计算软件,研究不同注氮量、注氮位置下采空区氧化自燃带的分布规律。研究结果表明:注氮量和注氮位置参数的变化,对氧化自燃带上界限的影响并不显著,而对氧化自燃带的下界限影响比较显著;最合适的注氮位置应该在距离切顶线30 m左右,运用Origin软件得出注氮量与氧化自燃带宽度呈指数关系,由拟合式计算出最优注氮量为386 m3/h,此时氧化自燃带的宽度为31.5 m。     

不同自燃倾向性煤的指标气体产生规律实验研究

为研究不同自燃倾向性煤的自燃指标气体变化规律,提高对煤早期自燃预测预报的准确度,采用程序升温实验系统,得到内蒙古褐煤、神东长焰煤、河南气煤及枣庄焦煤4种不同变质程度煤的氧化时间随温度的变化关系,以及指标气体浓度在煤氧化过程中的变化规律。结果表明:自燃倾向性最高的褐煤应以CO和乙烯作为煤自燃早期预报的首选指标气体;易自燃的长焰煤应采用乙烯和烯烷比为主、以CO为辅的煤自燃判定指标;自燃倾向性较低的气煤应以乙烯和烯烷比作为煤自燃预报指标;CO是自燃倾向性最低的焦煤的最佳自燃预报指标气体。     

不同煤层煤氧化自燃性实验分析

为研究不同煤层煤自然发火特征的异同性及规律,以淮南矿区1号、3号、6号、13号煤层为研究对象,通过自然发火实验,对不同煤层煤的自然发火期周期、煤样70℃时放热强度和R70值进行分析。研究结果表明:4个不同煤层煤样自燃性由强到弱依次为:3煤>6煤>1煤>13煤;变质程度相近的4个煤层,3煤自然发火期最短,这与煤体中硫分和水分含量高有关;13煤变质程度较高,且前期放热强度、耗氧速率增长缓慢,其自燃性较弱;4个不同煤层煤的耗氧速率、CO,CO2产生率,以及C2H4/C2H6值随煤温升高具有相似的变化规律;煤中CH4气体大量解吸出现于煤温60℃之前,煤中灰分在80~120℃开始逐渐吸热融化,解析和融化均会抑制煤氧接触并且减小煤氧反应放热总量。     

垃圾炉一次风量对炉床燃烧影响的仿真研究

针对垃圾焚烧炉床层内垃圾燃烧过程复杂性及影响垃圾燃烧效率因素多的问题,运用数值仿真方法对某垃圾焚烧炉床层垃圾燃烧进行了模拟,获得了垃圾质量流失速率、水分蒸发速率、挥发分释放速率、焦炭燃烧速率和烟气的温度;并在50~1 000 Nm3/min范围内改变一次风流量,获得了床层质量流失比值、过剩空气系数和烟气中各组分的质量百分比含量。仿真结果显示,一次风流量取值517.47~6`32.09 Nm3/min时燃烧效率较高;炉排两端区域的一次风流量在50~75 Nm3/min时,可以使垃圾床表面平均温度明显提高,而且还可以提高燃烧效率,同时减少供风总量,节约能源与动力资源。本研究对优化设计垃圾焚烧炉,提高床层内垃圾的燃烧效率有一定参考价值。     

Chemical fluxes in time through forest ecosystems in the UK - Soil response to pollution recovery

Long term trend analysis of bulk precipitation, throughfall and soil solution elemental fluxes from 12 years monitoring at 10 ICP Level II forest sites in the UK reveal coherent national chemical trends indicating recovery from sulphur deposition and acidification. Soil solution pH increased and sulphate and aluminium decreased at most sites. Trends in nitrogen were variable and dependant on its form. Dissolved organic nitrogen increased in bulk precipitation, throughfall and soil solution at most sites. Nitrate in soil solution declined at sites receiving high nitrogen deposition. Increase in soil dissolved organic carbon was detected - a response to pollution recovery, changes in soil temperature and/or increased microbial activity. An increase of sodium and chloride was evident - a possible result of more frequent storm events at exposed sites. The intensive and integrated nature of monitoring enables the relationships between climate/pollutant exposure and chemical/biological response in forestry to be explored.     

Reaction mechanism of arsenic capture by a calcium-based sorbent during the combustion of arsenic-contaminated biomass: A pilot-scale experience

Pilot-scale combustion is required to treat arsenic-enriched biomass in China. CaO addition to arsenic-enriched biomass reduces arsenic emission. CaO captures arsenic via chemical adsorption to form Ca₃(AsO₄)₂. Large quantities of contaminated biomass due to phytoremediation were disposed through combustion in low-income rural regions of China. This process provided a solution to reduce waste volume and disposal cost. Pilot-scale combustion trials were conducted for in site disposal at phytoremediation sites. The reaction mechanism of arsenic capture during pilot-scale combustion should be determined to control the arsenic emission in flue gas. This study investigated three Pteris vittata L. biomass with a disposal capacity of 600 kg/d and different arsenic concentrations from three sites in China. The arsenic concentration in flue gas was greater than that of the national standard in the trial with no emission control, and the arsenic concentration in biomass was 486 mg/kg. CaO addition notably reduced arsenic emission in flue gas, and absorption was efficient when CaO was mixed with biomass at 10% of the total weight. For the trial with 10% CaO addition, arsenic recovery from ash reached 76%, which is an ~8-fold increase compared with the control. Synchrotron radiation analysis confirmed that calcium arsenate is the dominant reaction product.     

Compositional Changes of Aromatic Steroid Hydrocarbons in Naturally Weathered Oil Residues in the Egyptian Western Desert

Naturally weathered oil residues from an arid dumpsite in Al-Alamein, Egypt were analyzed for monoaromatic and triaromatic steranes to demonstrate the utility of biomarker compounds in assessing the chemical composition changes during the degradation of the released oil residues in a terrestrial environment. The characterizations of individual aromatic compounds were based on gas chromatography/mass spectrometry (GC/MS) analyses. The results showed that triaromatic sterane distributions were similar in the oil residues of varying weathering degradation extents and correlated with a fresh crude oil sample of the Western Desert-sourced oil. Molecular ratios of triaromatic sterane compounds (ratios of C 28 20R /C 28 20S , C 27 20R /C 28 20R , and C 28 20S /[C 26 20R + C 27 20S ]) were proved to be suitable for source identification. Major changes in chemical compositions during weathering of the oil residues were the depletion of short chain mono- and tri-aromatic steranes in samples that had undergone extensive degradation. The results of triaromatic sterane distribution are in good agreement with weathering classification based on the analyses of saturate and aromatic hydrocarbons and the ratios of n -alkanes, PAHs and saturate biomarker compounds.     

Integrating phenological, chemical and biotic defences in ant-plant protection mutualisms: a case study of two myrmecophyte lineages

Summary. We examined the role of plant phenology in the evolution of anti-herbivore defence in symbiotic ant-plant protection mutualisms. Phenology of the host-plant affects traits of its herbivores, including size, growth rate, development time, and gregariousness. Traits of herbivores in turn determine what traits ants must have to protect their host. Diversity in plant phenological traits could thus help explain the great ecological diversity of coevolved ant-plant mutualisms. We explored the postulated causal chain linking phenology of the plant, herbivore adaptations to phenology, and ant adaptations for protection, by comparing two myrmecophytes presenting strong contrasts in phenology. In Leonardoxa africana, a slow-growing understory tree, growth at each twig terminal is intermittent, the rapid flushing of a single leaf-bearing internode being followed by a pause of several months. In contrast, axes of Barteria nigritana, a tree of open areas, grow continuously. Analysis of the phenology (kinetics of expansion) and chemistry of leaf development (contents of chlorophylls, lignin, and nitrogen during leaf growth) showed that these two species exhibit strongly contrasting strategies. Leonardoxa exhibited a delayed greening strategy, with rapid expansion of leaves during a short period, followed by synthesis of chlorophylls and lignins only after final leaf size has been reached. In contrast, leaves of Barteria expanded more slowly, with chlorophylls and lignin gradually synthesised throughout development. Differences in the phenology of leaf development are reflected in differences in the duration of larval development, and thereby in size, of the principal lepidopteran herbivores observed on these two plants. This difference may in turn have led to different requirements for effective defence by ants. The strategy of phenological defence may thus affect the evolution of biotic defence.