中低温厌氧处理城市污水污泥颗粒化的研究

用高径比为3∶1的UASB反应器分别在35℃和室温条件下处理模拟城市污水,研究了污泥的颗粒化过程。比较了在不同温度、浓度下形成的颗粒污泥的特征。水温为9~25℃,进水浓度为100~200 mg COD/L,水力上流速度(Vup)在0.013~0.11 m/h的4#UASB反应器在60 d内在形成了成熟的颗粒污泥。研究表明,进水中低的有机物浓度,低的Ca2+、Mg2+浓度和低的Vup没有抑制颗粒化进程。     

Chemical characteristics and sources of water-soluble organic aerosol in southwest suburb of Beijing

PM_2.5 filter sampling and components measurement were conducted in autumn and winter from 2014 to 2015 at a suburban site (referred herein as “LLH site”) located in the southwest of Beijing. The offline aerosol mass spectrometry (offline-AMS) analysis and positive matrix factorization (PMF) were applied for measurement and source apportionment of water-soluble organic aerosol (WSOA). Organic aerosol (OA) always dominated PM_2.5 during the sampling period, especially in winter. WSOA pollution was serious during the polluted period both in autumn (31.1 µg/m³) and winter (31.9 µg/m³), while WSOA accounted for 54.4% of OA during the polluted period in autumn, much more than that (21.3%) in winter. The oxidation degree of WSOA at LLH site was at a high level (oxygen-to-carbon ratio, O/C=0.91) and secondary organic aerosol (SOA) contributed more mass ratio of WSOA than primary organic aerosol (POA) during the whole observation period. In winter, coal combustion OA (CCOA) was a stable source of OA and on average accounted for 25.1% of WSOA. In autumn, biomass burning OA (BBOA) from household combustion contributed 38.3% of WSOA during polluted period. In addition to oxygenated OA (OOA), aqueous-oxygenated OA (aq-OOA) was identified as an important factor of SOA. During heavy pollution period, the mass proportion of aq-OOA to WSOA increased significantly, implying the significant SOA formation through aqueous-phase process. The result of this study highlights the concentration on controlling the residential coal and biomass burning, as well as the research needs on aqueous chemistry in OA formation.     

云南稻核心种质苗期耐冷性及其地理生态差异

采用Nagamine等(1991)法研究了598份云南稻核心种质在稻作区划间、地州间苗期耐冷性强弱、变异程度及其地理生态差异。结果表明,稻作区划间苗期耐冷强弱差异较大,平均耐冷级别为:I(4.70)>II(4.78)>V(4.79)>III(5.34)>IV(5.36),40份强耐冷种质频率为II(45%)>I(25%)>III(22.5%)>V(5.0%)>IV(2.5%),其变异系数为II(32.22%)>I(31.28%)>V(29.65%)>III(19.66%)>IV(19.59%);揭示了苗期耐冷性与低温胁迫下水稻冬春育秧、冷泉水密切相关,其耐冷基因源是云南南部地区冬季育秧和滇中一带苗期倒春寒长期协同进化的结果;苗期耐冷种质广泛存在于热带、亚热带和温带地区,品种间苗期耐冷差异也明显。云南稻核心种质16个地州平均苗期耐冷强弱差异较大。根据气候、生态、云南稻种多样性及其苗期耐冷性等将云南稻作区划分为重冷害多样性贫乏区、冷害多样性中区和轻冷害区三部分。其中,曲靖、大理、楚雄、昆明和丽江5个地州平均耐冷级别3.65~4.32,0—2级苗期强耐冷种质占27.5%(2.5%~10%)和高海拔冷泉水苗期灌溉,属于重冷害多样性贫乏区;文山、红河、思茅、保山、德宏和临沧6个地州平均耐冷级别4.45~5.40,0—2级苗期耐冷种质占70%(5%~30%)和冬春育秧,属于冷害多样性中区;怒江、玉溪、昭通、迪庆和西双版纳5个地州平均耐冷级别5.05~5.87,0—2级苗期耐冷种质占2.5%(0~2.5%),属于轻冷害多样性扩散区。水稻冬春育秧和高海拔冷泉水灌溉在云南稻核心种质苗期耐冷基因源演化中起了重要作用。     

热塑性成形唯象应力-应变本构方程

在高温实验基础上,提出一种建立材料高温塑性成形全过程的唯象本构关系的方法,获得42CrMo及T3两种典型材料的热塑性加工过程应力-应变本构方程。为材料成形工艺及数值模拟提供不可缺少的基本保障条件。     

Threatened Peripheral Populations in Context: Geographical Variation in Population Frequency and Size and Sexual Reproduction in a Clonal Woody Shrub

Abstract:  Geographically peripheral populations of widespread species are often the focus of conservation because they are locally rare within political jurisdictions. Yet the ecology and genetics of these populations are rarely evaluated in a broader geographic context. Most expectations concerning the ecology and evolution of peripheral populations derive from the abundant-center model, which predicts that peripheral populations should be less frequent, smaller, less dense, and have a lower reproductive rate than central populations. We tested these predictions and in doing so evaluated the conservation value of peripheral populations for the clonal shrub Vaccinium stamineum L. (Ericaceae, deerberry), which is listed as threatened in Canada. Based on 51 populations sampled from the center to the northern range limits over 2 years, population frequency and size declined toward the range limit, but ramet density increased. Sexual reproductive output varied widely among populations and between years, with many populations producing very few seeds, but did not decline toward range margins. In fact seed mass increased steadily toward range limit, and this was associated with faster germination and seedling growth, which may be adaptive in seasonal northern environments. Our results did not support the prediction that clonal reproduction is more prevalent in peripheral populations or that it contributed antagonistically to the wide variation in seed production. Peripheral populations of V. stamineum are as productive as central populations and may be locally adapted to northern environments. This emphasizes the importance of a broad geographical perspective for evaluating the ecology, evolution, and conservation of peripheral populations.     

吸波结构聚氨酯泡沫基体材料耐老化性能评估试验设计

目的针对吸波结构的基体材料——一种软质聚氨酯泡沫耐老化性能的考核,设计一种环境适应性试验,确定施加的环境应力和产品老化性能的表征参数。方法通过吸波结构的聚氨酯泡沫材料的特征性能参数分析,根据产品应用要求和预试验结果,确定合适的老化性能的主要表征指标,通过多应力水平试验和方差分析,确定采用的主要加速老化环境应力。结果通过预试验与分析认为,吸波结构用聚氨酯泡沫材料耐老化性能可采用断裂伸长率来作表征,由于防水覆膜能很好地阻隔水汽对聚氨酯材料的影响,采用单温度应力便可以来考核其老化性能。结论针对具有防水覆膜的吸波结构用聚氨酯泡沫材料,采用单温度应力作用下的断裂伸长率变化可以对其耐老化性能进行有效评估。     

航道水域的船舶夜航环境风险评价

准确地识别航道水域夜航环境的风险因子并对其进行客观、合理地评价,可以有效规避该风险并保障航道水域船舶的夜航安全。在查阅分析大量文献的基础上,结合专家意见确定航道水域夜航环境风险评价指标体系,运用层次分析法和熵权法确定了各指标的主、客观权重。采用物元综合评价法对航道水域夜航环境风险进行评价,通过查阅相关标准和文献确定航道水域夜航环境风险因子的经典域和节域,将实测的定量定性指标数据代入关联函数计算得出对应等级的关联度,乘以权重向量后确定该水域环境的风险等级。选取天津港3条航道进行实例评价,结果表明,船舶在航道B夜航为低风险,在航道A和航道C夜航为一般风险,实例结果与航道实际情况一致,验证了该方法的有效性。     

基于C-OWA算子和证据理论的船舶夜航光环境安全评价

为了更好地保障船舶夜航安全,基于船舶夜航光环境的特殊性和船舶夜航的风险性,构建船舶夜航光环境证据理论评价模型。首先,建立以信号灯误导、眩光干扰、频闪污染、光导致疲劳等4个决策层为基础的船舶夜航光环境评价指标体系;其次,运用C-OWA算子处理专家对指标的决策数据,判断光环境对船舶夜航安全的影响程度;最后,将证据理论模型应用于大连大窑湾港的夜航光环境中。结果表明:该光环境安全性高,对船舶夜航安全的影响小。构建的模型为港口、航道以及其他船舶夜航光环境水域安全评价提供了一定的参考依据。     

Polish adaptation of three self-report measures of job stressors: the Interpersonal Conflict at Work Scale,the Quantitative Workload Inventory and the Organizational Constraints Scale

Aim. The objective of the present study was to test the psychometric properties, reliability and validity of three job stressor measures, namely, the Interpersonal Conflict at Work Scale, the Organizational Constraints Scale and the Quantitative Workload Inventory. Method. The study was conducted on two samples (N?=?382 and 3368) representing a wide range of occupations. The estimation of internal consistency with Cronbach's α and the test–retest method as well as both exploratory and confirmatory factor analyses were the main statistical methods. Results. The internal consistency of the scales proved satisfactory, ranging from 0.80 to 0.90 for Cronbach's α test and from 0.72 to 0.86 for the test–retest method. The one-dimensional structure of the three measurements was confirmed. The three scales have acceptable fit to the data. The one-factor structures and other psychometric properties of the Polish version of the scales seem to be similar to those found in the US version of the scales. It was also proved that the three job stressors are positively related to all the job strain measures. Conclusions. The Polish versions of the three analysed scales can be used to measure the job stressors in Polish conditions.     

How are Results from Critical Load Calculations Reflected in Lake Water Chemistry?

The Steady State Water Chemistry Model (SSWCM) is a common method for determinations of critical loadof acid and subsequently of critical loadexceedance for lakes. One way to verify the modeloutput, is to compare with chemical indicatorssuch as pH-value, alkalinity or ANC. When themedian chemical status (as ANC) is used 65% ofthe lakes responded according to the exceedancevalue. For these the calculated exceedanceresulted in violation of the critical chemicalvalue while non-exceedance gave no violation.Since biota react on extreme conditions a morecorrect evaluation should be based on minimumvalues for the chemical indicator. This raises thefraction of lakes responding to 78%. Non-exceedance is seldom found inlakes with acid conditions. The evaluationindicates that the calculation of critical load ofacidity by means of SSWCM is very reliable.