对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。     

脱除SO2活性炭的再生方法

分别用溶剂和气体对脱除SO2后失活的活性炭进行了再生。在固定床反应器上考察了再生后活性炭的脱硫性能。实验结果表明：用溶剂再生时,质量分数为60％的HNO3溶液的再生效果最好,活性炭的再生率达到80％以上。用气体再生时,400℃左右时的再生效果最好,活性炭的再生率达到70％以上。再生后活性炭的比表面积和pH是衡量活性炭再生效果的重要参数。在实际脱硫生产中,用H2O对失活活性炭进行反复洗涤再生,是一种经济、实用的方法,活性炭的再生率达60％以上。     

流化催化裂化烟气脱硫助剂的制备及其脱硫活性

采用溶胶-凝胶法制备锌铝助剂,该助剂于700℃焙烧后与流化催化裂化（FCC）催化剂进行机械混合,制得混合催化剂;在FCC烟气工业模拟装置上考察混合催化剂的脱硫活性,用混合催化剂的脱硫活性来反映锌铝助剂的脱硫性能。实验结果表明,氧化锌质量分数为10％的锌铝助剂的脱硫活性最佳,脱硫率达62．5％。采用红外光谱和X射线衍射（XRD）对锌铝助剂的脱硫机理进行了研究,红外分析结果表明,弱的L酸中心有利于锌铝助剂脱硫,XRD分析结果表明,锌铝助剂在锌铝尖晶石结构尚未完全形成时,存在较多的晶格缺陷,能够有效地吸附烟气中的SOx,将其转化为H2S。     

Photodegradation of Oryzalin in aqueous isopropanol and acetonitrile

The phototransformation of Oryzalin was studied under UV light (λ_max ≥ 290 nm) and sunlight (λ_max ≥ 250 nm) in aqueous isopropanol and acetonitrile solution in absence and presence of TiO₂ as sensitizer. The rate of photodegradation of Oryzalin in different solvent system followed first-order kinetics, and calculated half-lives were found to be in the range of 23.52-53.75 h for UV light and 41.23-61.43 h for sunlight. From this study, total 12 photoproducts were identified and characterized on the basis of column chromatography and Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved was hydrolysis, breaking of sulfonic bond, and loss of amino and sulfonic acid group.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.     

Stable hydrogen,carbon and chlorine isotope measurements of selected chlorinated organic solvents

Stable hydrogen isotopes of two chlorinated solvents, trichloroethylene (TCE) and 1,1,1-trichloroethane (TCA), provided by five different manufacturers, were determined and compared to their carbon and chlorine isotopic signatures. The isotope ratio for delta2H of different TCEs ranged between +466.9 per thousand and +681.9 per thousand, for delta13C between -31.57 per thousand and -27.37 per thousand, and for delta37Cl between -3.19 per thousand and +3.90 per thousand. In the case of the TCAs, the isotope ratio for delta2H ranged between -23.1 per thousand and +15.1 per thousand, for delta13C between -27.39 per thousand and -25.84 per thousand, and for delta37Cl between -3.54 per thousand and +1.39 per thousand. As well, a column experiment was carried out to dechlorinate tetrachloroethylene (PCE) to TCE using iron. The dechlorination products have completely different hydrogen isotope ratios than the manufactured TCEs. Compared to the positive values of delta2H in manufactured TCEs (between +466.9 per thousand and +681.9 per thousand), the dechlorinated products had a very depleted delta2H (less than -300 per thousand). This finding has strong implications for distinguishing dechlorination products (PCE to TCE) from manufactured TCE. In addition, the results of this study show the potential of combining 2H/1H analyses with 13C/12C and 37Cl/35Cl for isotopic fingerprinting applications in organic contaminant hydrogeology.     

Photochemical oxidation of reduced sulfur compounds in an urban location based on short time monitoring data

This study examines the oxidation of reduced sulfur compounds (RSCs) in urban ambient air. The photochemical conversions of RSC (such as DMS, CS₂, H₂S, DMDS, and CH₃SH) to a further oxidized form (e.g., SO₂, MSA, and H₂SO₄) were assessed using a photochemical box model. For our model simulation of RSC oxidation, measurements were taken at an urban monitoring station in Seoul, Korea (37.6° N, 127° E) during three separate time periods (e.g., Sept. 17–18, Oct. 23, and Oct. 27–28, 2003). The results indicate that DMS and H₂S were the dominant RSCs with concentrations of 370 ± 140 and 110 ± 60 pptv, respectively. The photochemical conversion of DMDS to SO₂ was found to occur more efficiently than other RSCs. The overall results of our study suggest that photochemical conversion of RSCs accounted for less than 15% of the observed SO₂ during the measurement period. The SO₂ production from DMS oxidation (mainly by the reaction with OH) was found to be affected primarily by the abstraction channel due to high NO_x levels during the experimental conditions.     

Analysis of the relationship between ambient levels of O3, NO2 and NO as a function of NOx in the UK

Monitoring data from the UK Automatic Urban and Rural Network are used to investigate the relationships between ambient levels of ozone (O₃), nitric oxide (NO) and nitrogen dioxide (NO₂) as a function of NO_x, for levels ranging from those typical of UK rural sites to those observed at polluted urban kerbside sites. Particular emphasis is placed on establishing how the level of ‘oxidant’, OX (taken to be the sum of O₃ and NO₂) varies with the level of NO_x, and therefore to gain some insight into the atmospheric sources of OX, particularly at polluted urban locations. The analyses indicate that the level of OX at a given location is made up of NO_x-independent and NO_x-dependent contributions. The former is effectively a regional contribution which equates to the regional background O₃ level, whereas the latter is effectively a local contribution which correlates with the level of primary pollution. The local oxidant source has probable contributions from (i) direct NO₂ emissions, (ii) the thermal reaction of NO with O₂ at high NO_x, and (iii) common-source emission of species which promote NO to NO₂ conversion. The final category may include nitrous acid (HONO), which appears to be emitted directly in vehicle exhaust, and is potentially photolysed to generate HO_x radicals on a short timescale throughout the year at southern UK latitudes. The analyses also show that the local oxidant source has significant site-to-site variations, and possible reasons for these variations are discussed. Relationships between OX and NO_x, based on annual mean data, and fitted functions describing the relative contributions to OX made by NO₂ and O₃, are used to define expressions which describe the likely variation of annual mean NO₂ as a function of NO_x at 14 urban and suburban sites, and which can take account of possible changes in the regional background of O₃.