正己烷萃取—此外分光光度法测定矿井水中微量油

在进行矿井水中油类分析时，用正己烷作为萃取剂，以工作曲线代替标准曲线，从而使油平均回收率增加到96％以上。并在正己烷用量、水样预处理等测试参数选择上做了条件试验。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

粉煤灰/工业污泥烧结陶粒的制备与应用

以粉煤灰和工业污水处理站的剩余污泥为主要原材料，采用烧结法研制复合陶粒。分析了不同配方和不同烧结温度对陶粒性能的影响，以陶粒吸水率．容重为评价指标确定最佳配比和最佳烧结温度。提出用陶粒铺设景观水底，治理城市水体．并对其进行了可行性分析。粉煤灰／污泥陶粒的容重为0．79～0．9g／cm^3，吸水率为68．95％-80．01％。陶粒对水中氨氮和总磷吸附容量分别为0．03～0．05mg／g和0．01-0.02mg／g。     

硫代氨基甲酸盐提取工业废水中的锌离子

本文主要探索了金属离子络合剂———硫代氨基甲酸盐的合成制备 ,并通过其对锌离子的络合作用 ,以达到脱除金属离子的目的 .实验表明 ,由吗啡啉合成制得的硫代氨基甲酸盐 锌离子络合剂在酸性废水中 ,对锌离子具有良好的络合能力 .通过对废水中金属锌离子的脱除工艺条件的相应探索 ,发现在体系的pH =2～ 6范围内 ,硫代氨基甲酸盐对锌离子的脱除率均达99 %以上     

一种粉煤灰加气砼清洁生产新技术的研究

针对粉煤灰加气砼砌块生产的特点，分析了粉煤灰加气砼清洁生产的基本技术，设计了一种粉煤灰加气砼破碎磨粉车间清洁生产新方法，该方法能实现粉煤灰加气砼破碎磨粉车间湿式去尘，并有效提高水、气资源的综合利用率，该方法也可用于其它粉尘排放量大的场所除尘。     

超临界水处理有机废物研究新进展

超临界水处理废物以通过添加氧化剂的超临界水氧化和不加氧化剂的超临界水萃取两种方式实现，超临界水氧化应用较多，与其它废物处理技术相比有显著优点。本文总结了超临界水氧化流程和反应机理，评述了添加剂，温度，压力及停留时间，催化剂等对超临界水氧化反应的影响，同时介绍了超临界水氧化和超临界水萃取的最新应用研究状况及尚需解决问题。     

陆架浅海沉积物-海水界面溶质通量的计算方法及其应用

陆架浅海沉积物—海水界面上的溶解态生源物质通量的准确估算是海洋生态系统动力学研究中的关键性问题之一。由于底栖生物活动以及海流、海浪及潮波与海底地形地物相互作用的影响 ,使得该通量的准确估算十分困难。本文综合分析讨论了近年来提出的各种计算该类通量的物理模型及参数的确定方法 ,并结合在中国黄、东海等陆架浅海水层—底栖生态动力学耦合模型研究的需要 ,比较深入地讨论了应用过程中应该考虑的几个问题     

煤中易挥发有毒痕量元素及其在燃烧过程中的行为

本文综述了煤中易挥发有毒痕量元素汞、砷、硒在煤中的赋存形式 ,在燃烧过程中的蒸发和化学反应等行为 ,指出了在目前研究燃煤过程中有毒痕量元素所存在的问题和需要努力加强的研究方向     

Factors associated with multiple-pass procedures during chorionic villus sampling: A video analysis

Multiple placental passes during chorionic villus sampling (CVS) increase the risk of fetal loss; however, specific factors that predispose to repeat aspiration have not been delineated. To identify anatomic and technical variables associated with multiple-pass procedures, a detailed review of 205 videotaped CVS procedures (single pass = 163; multiple pass = 42) was performed, blinded to pregnancy outcome. The route of sampling did not influence the need for multiple aspiration attempts (transabdominal—30/ 135; transcervical—12/70), nor was placental location alone discriminatory. However, the combination of a posterior placenta and uterine retroversion was observed more frequently in the multiple-pass cohort (8/42 vs. 9/163; p<0.05). In transabdominal cases, suboptimal needle placement (e.g., perpendicular to the placental long axis) was more common in the initial aspiration of a multiple-pass procedure (21/30 vs. 38/105;p<0.01), while limited penetration of the catheter tip (e.g., just inside the placental edge) characterized a majority of multiple-pass cases in the transcervical subset (7/12 vs. 3/58; p<0.0001). A case-control cohort was constructed to evaluate the impact of these technical variables on sampling efficacy, independent of the influence of uterine position and placental site. In that analysis, suboptimal location and/or orientation of the sampling device remained characteristic of multiple-pass cases. We conclude that further reduction in the frequency of multiple-pass procedures might be achieved by consistent placement of the device tip in the central placental mass. Unlike amniocentesis, where any point of amnion entry will suffice, this technical nuance should be emphasized with CVS to maximize the single-pass success rate.     

北京市工业废水和城市污水中菊酯类农药残留分析

建立了基于18C固相萃取柱和气相色谱/电子捕获（GC/ECD）分析水体中环境激素类物质--菊酯类农药的分析方法,并对方法的回收率、灵敏度进行了评价,同时分析了北京市七类典型污染点源50个采样点位菊酯类农药的浓度,检出的菊酯类农药包括联苯菊酯、氰戊菊酯、氯氰菊酯和溴氰菊酯,其检出率都较低,低于22%.检出菊酯类农药的浓度范围是0.013～1.246μg/L.该方法对菊酯类农药的回收率达到67.7%～96.2%,检测限为0.010～0.015μg/L.溴氰菊酯在废水排放中的达标率为100%.