Emissions from RDF/coal blended fuel combustion

The significant volume and weight reduction along with the energy potential of MSW, in the form of refuse derived fuel (RDF), has made its incineration an attractive alternative. However, the gaseous emissions such as, CO₂, CO, NO_x and SO₂, which are the byproduct of the combustion process pose serious environmental problems. These problems are compounded by the presence of certain highly regulated hazardous wastes such as, dioxins and furans in the exhaust stream. In the present investigation, different compositions of RDF/Coal blends were examined and the gaseous emissions from the combustion of the briquetted fuel were measured. Also, a direct comparison of emissions from RDF/coal blend incineration with coal combustion is presented in this paper. The potential for recovery of ferrous and non- ferrous metals provides an additional economic motivation for the use of RDF/Coal blended briquettes.     

Trimethylbenzoic acids as metabolite signatures in the biogeochemical evolution of an aquifer contaminated with jet fuel hydrocarbons

Evolution of trimethylbenzoic acids in the KC-135 aquifer at the former Wurtsmith Air Force Base (WAFB), Oscoda, MI was examined to determine the functionality of trimethylbenzoic acids as key metabolite signatures in the biogeochemical evolution of an aquifer contaminated with JP-4 fuel hydrocarbons. Changes in the composition of trimethylbenzoic acids and the distribution and concentration profiles exhibited by 2,4,6- and 2,3,5-trimethylbenzoic acids temporally and between multilevel wells reflect processes indicative of an actively evolving contaminant plume. The concentration levels of trimethylbenzoic acids were 3-10 orders higher than their tetramethylbenzene precursors, a condition attributed to slow metabolite turnover under sulfidogenic conditions. The observed degradation of tetramethylbenzenes into trimethylbenzoic acids obviates the use of these alkylbenzenes as non-labile tracers for other degradable aromatic hydrocarbons, but provides rare field evidence on the range of high molecular weight alkylbenzenes and isomeric assemblages amenable to anaerobic degradation in situ. The coupling of actual tetramethylbenzene loss with trimethylbenzoic acid production and the general decline in the concentrations of these compounds demonstrate the role of microbially mediated processes in the natural attenuation of hydrocarbons and may be a key indicator in the overall rate of hydrocarbon degradation and the biogeochemical evolution of the KC-135 aquifer.     

纳米铁对微生物燃料电池启动的影响

设置3组不同阳极底物的微生物燃料电池（microbial fuel cell,MFC）：无添加污泥（对照组）、含化学合成零价纳米铁的污泥（c-nZVI组）和含绿色合成零价纳米铁的污泥（g-nZVI组）,拟探究不同来源零价纳米铁（nZVI）对MFC启动的影响。3组MFC经由5个周期启动,实验结果表明,在c-nZVI组和g-nZVI组的启功阶段,高浓度的绿色合成零价纳米铁和化学合成零价纳米铁均对MFC的输出电压产生抑制作用,当MFC成功启动后,零价纳米铁对MFC的输出电压影响不明显。此外,COD去除率、SEM和电化学表征数据表明,绿色合成零价纳米铁相比于化学合成零价纳米铁在电极表面富集程度、对电极表面性质改变以及产电菌活性的抑制作用更弱。     

Effects of compression ratio,swirl augmentation techniques and ethanol addition on the combustion of CNG–biodiesel in a dual-fuel engine

The diminishing resources and continuously increasing cost of petroleum in association with their alarming pollution levels from diesel engines has led to an interest in finding alternative fuels to diesel. Emission control and engine efficiency are two of the most important parameters in current engine design. The impending introduction of emission standards such as Euro IV and Euro V has forced research towards developing new technologies for combating engine emissions. This paper examines the effects of compression ratio, swirl augmentation techniques and ethanol addition on the combustion of compressed natural gas (CNG) blended with Honge oil methyl esters (HOME) in a dual fuel engine. The present results show that the combustion of HOME and 15% ethanol blend with CNG induction in a dual-fuel engine operated in optimized parameters at an injection timing of 27° Before Top Dead Centre and a compression ratio of 17.5 resulted in acceptable combustion emissions and improved brake thermal efficiencies. The implementation of swirl augmentation techniques increased brake thermal efficiencies (BTEs) and considerably reduced combustion emissions such as smoke, HC, CO and NO_x. The addition of ethanol also increased BTEs. However, at more than 15% of ethanol in HOME, NO_x emissions increased dramatically.     

碳布负载的Co3O4纳米片阵列阳极对微生物燃料电池产电性能的影响

微生物燃料电池（MFCs）是一种在处理废水的同时产生电能的新型装置,阳极作为产电微生物富集、电子产生和传递的区域对提高MFCs的性能具有至关重要的作用。以碳布负载的四氧化三钴多孔纳米片阵列(Co₃O₄/CC)作为阳极,探究了可调控的纳米片孔缺陷对MFCs产电性能的影响。结果表明：Co₃O₄/CC阳极的产电性能显著优于碳布,且正比于Co₃O₄纳米片的孔隙率;液固界面处的电荷传递电阻(R_ct)由729.20 Ω降至43.48 Ω,所获得的最大功率密度由1275 mW·m⁻²增加至1547 mW·m⁻²。本研究开发了一种孔结构可控的金属氧化物负载碳布策略,所制备的高性能阳极材料可为MFCs的性能提升提供参考。     

不锈钢纤维毡改性材料的制备及在微生物燃料电池中的应用

为制备一种导电性高、生物相容性良好且耐腐蚀的阳极材料,提高微生物燃料电池(MFC)的产电性能,以不锈钢纤维毡(SSFF)为基底,采用水热反应法制备了还原氧化石墨烯/不锈钢纤维毡(RGO/SSFF),并进一步采用粉体烧结法将纳米二氧化钛(TiO₂)负载至RGO/SSFF,制备了二氧化钛/还原氧化石墨烯/不锈钢纤维毡(TiO₂/RGO/SSFF),将SSFF(对照)、RGO/SSFF和TiO₂/RGO/SSFF分别作为MFC的阳极(对应的MFC分别命名为MFC-CK、MFC-RG和MFC-TRG)以探究改性材料对MFC去除水体中耗氧有机物和产电性能的影响。结果表明：与SSFF相比,RGO/SSFF和TiO₂/RGO/SSFF具有更大的电容(Q为413.9 mF和446.9 mF),更小的界面转移电阻(R_ct为19.65 Ω和18.16 Ω),更高的交换电流密度(i₀为1.56×10⁻⁵ mA和2.07×10⁻⁴ mA);MFC-TRG对水体COD去除速率最高可达929.62 mg·(L·d)⁻¹;MFC-RG和MFC-TRG稳定输出电压分别为245 mV和280 mV,比MFC-CK提高了88.5%和115.4%;MFC-RG和MFC-TRG的功率密度输出分别为 337.50 mW·m⁻²和472.03 mW·m⁻²,比MFC-CK提高了163.9%和233.9%。由此可知,改性后的RGO/SSFF和TiO₂/RGO/SSFF阳极成功提高了MFC的产电性能。该研究结果可为后续MFC阳极改性研究提供参考。     

关于制定地下水修复目标上限值 (风险管制值) 的建议

修复目标值是评判场地修复是否合格以及修复后地块能否安全利用的唯一标准,因此制定合理的修复目标值对于污染场地修复治理和安全利用起着至关重要的作用。大部分污染场地需要同时进行土壤和地下水修复,生态环境部发布了《建设用地土壤污染修复目标值制定指南 (试行) 》,然而地下水修复目标值制定的指南标准尚未发布。少数项目制定的地下水修复目标值过于宽松,无法保障地块的风险可控和安全利用。因此,建议借鉴土壤环境管理的思路,制定一个类似于“土壤管制值”的“地下水修复目标上限值 (风险管制值) ”。该值的制定不能只基于风险评估计算的结果,而应充分考虑每种污染物各自的理化性质、迁移转化归趋机制、环境赋存特征、健康和环境风险、国外同类标准的取值、检测方法的准确度和成本、经济社会承受能力等因素,力争做到合规合法、科学严谨、综合平衡。     

直接利用葡萄糖的液流催化燃料电池改进

液相催化燃料电池（LCFC）可直接处理生物质并产电,而电池结构等因素对电池性能有明显影响,但目前还缺乏上述方面的研究。通过系列产电实验考察了温度和酸化条件对Nafion115膜性能的影响、不同氧化条件下石墨毡的改性效果以及电池内部导流槽在不同葡萄糖浓度条件下的影响。结果表明：质子交换膜适宜以80 ℃酸化处理,该条件下电池功率密度达到5.39 mW·cm-2;石墨毡改性适宜以50 mL·min-1干空气流速在420 ℃条件下对其进行煅烧,该条件下电池功率密度进一步提升至6.21 mW·cm-2;葡萄糖浓度显著影响电池性能,当浓度为2.0 mol·L-1时,导流槽结构会降低电池性能,当浓度为1.0 mol·L-1和0.50 mol·L-1时,导流槽结构使电池性能更优,并且也更加稳定。     

AC/PTFE微生物燃料电池阴极去除罗丹明B及同步产电性能

采用辊压成型法制备了活性炭（AC）/聚四氟乙烯（PTFE）质量比分别为6、5和3的AC/PTFE 电极,并利用SEM对电极表面进行表征。结果表明,随着质量比的降低电极表面活性炭颗粒间的连接更为紧密。以制得的AC/PTFE电极,碳毡分别为微生物燃料电池（MFC）的阴极、阳极,利用AC/PTFE阴极在曝气条件下产生的过氧化氢在阴极处理模拟的罗丹明B废水。研究了不同质量比AC/PTFE阴极对罗丹明B的去除效果及同步产电情况,结果表明以AC/PTFE质量比为6的AC/PTFE阴极在96 h内对罗丹明B的去除率达到96%,MFC获得的最大功率密度为105 mW·m-2;同时研究了在阴极液加入0.2 g·L-1 Fe2+的条件下,阴极液为不同pH值时,阴极对罗丹明B的去除效果及MFC产电情况。结果表明在阴极液pH= 3的情况下,罗丹明B的去除率在36 h内达到了98.9%,MFC的最大功率密度达到210 mW·m-2,罗丹明B的去除速率及MFC能量的输出得到了明显提高。     

城市生活垃圾机械生物处理效果

采用机械生物处理工艺研究了淋洗水解、脱水与好氧生物干燥对城市生活垃圾的处理效果。结果表明:在淋洗水解及压榨脱水机械生物处理阶段,控制淋洗液与生活垃圾重量比2:1,停留时间1.2~1.4 d条件下,生活垃圾可以减量49.7%。而过程中产生的淋滤液COD为 32 939 mg/L、pH为5.1、COD:N:P=261:5:3.6,可以进行厌氧消化处理或作为碳源进行资源化利用。在好氧生物干燥阶段,通风量采用0.08 m3/min,2~3 d堆体温度可升至73℃,7 d左右即可产出LCV高达15 000 kJ/kg左右的高品位垃圾衍生燃料(RDF),其产率为38.2%,氯元素含量低于0.5%,重金属含量较低,满足燃料要求。