On the confluence of city living,energy saving behaviours and direct residential energy consumption

The purpose of this study is to shed light on the connection between income, dwelling type, tenure type and city living, in terms of both a household’s energy saving behaviours and direct residential energy consumption. This study employs data from the Household Energy Consumption Survey, Australia. Using a seemingly unrelated regression (SUR) system of equations the results reveal some key mechanisms which may allow householders to realise lower levels of energy consumption and hence lower carbon emissions. The results indicate that there are characteristics unique to living in a city that are linked to higher levels of direct residential energy consumption. On a number of measures (e.g. household income, tenure type and dwelling type), the results point to a lower likelihood of engaging in energy saving behaviours in cities. Also, depending on the number of energy saving behaviours, these actions have the potential to more than offset higher direct residential energy consumption of householders residing in separate houses. Coupled with these findings renters, a more vulnerable social group, are found to be significantly disadvantaged, suffering from a much lower adaptive capacity. Specifically, householders who rent their home are 77% less likely to have solar electricity. A result which may reflect differences in access to opportunity. Further, householders who rent are less likely to engage in energy saving actions. A finding which may reflect difference in ontological security and the greater psychological burden associated with undertaking energy saving behaviours (a barrier) borne by renters not shared with home owners.     

The future of hydropower in Europe: Interconnecting climate,markets and policies

Hydropower is very important for electricity supply security in the European inter-connexion as well as for the economy of regions (primarily peripheral) that possess water resources. Its future may however be jeopardized by several factors: climate change, the development of new renewable energy, the creation of super and micro-grids, and progress in power storage technology. Energy and climate policy, as well as electricity market design and dynamics play a pivotal role.This article carries out a comprehensive analysis of all these factors and discusses the future of hydropower. This discussion follows an overview of the present situation and of future drivers. The technical, environmental, economic and political aspects of the problem are analyzed with an interdisciplinary approach. The stakes as well as the uncertainties are highlighted.The conclusion is that hydropower has a promising future, particularly in light of emerging sustainable energy policy, but that the risks should not be overlooked. Academics will find a comprehensive interdisciplinary analysis of hydropower in this article, whereas public bodies, communities and hydropower companies can identify the strategic variables that should be taken into consideration in the decision making process. The end of water concessions or authorizations is also evoked.     

Green defaults: Information presentation and pro-environmental behaviour

There is inconsistency in many people's choice of electricity. When asked, they say they prefer a ‘green’ (i.e., environmentally friendly) source for this energy. Yet, although green electricity is available in many markets, people do not generally buy it. Why not? Motivated by behavioural decision research, we argue that the format of information presentation drastically affects the choice of electricity. Specifically, we hypothesise that people use the kind of electricity that is offered to them as the default. We present two natural studies and two experiments in the laboratory that support this hypothesis. In the two real-world situations, there was a green default, and most people used it. In the first laboratory experiment, more participants chose the green utility when it was the default than when ‘grey’ electricity was the default. In the second laboratory experiment, participants asked for more money to give up green electricity than they were willing to pay for it. We argue that changing defaults can be used to promote pro-environmental behaviour. Potential policy-making applications of this work are discussed.     

三烧溴化锂集中制冷空调系统改建设计

武钢三烧区域改建了二台大连三洋蒸汽型双效溴化锂吸收式制冷机。叙述了该改建项目的主机选型、参数选定、设计特点等。     

Testing emissions equivalency metrics against climate policy goals

The climate impacts of energy technologies are frequently assessed using equivalency metrics, which convert emissions of multiple greenhouse gases to a common scale. Numerous metrics have been proposed that incorporate, in different ways, information about the time-dependent impacts of gases. However, more focus has been placed on proposing metrics than on testing their performance in real-world use cases. Here we present a testing approach that simulates how metrics would affect the selection of energy technology portfolios that comply with a CO₂-equivalent emissions cap. Unintended radiative forcing outcomes can occur, emphasizing the need to test metrics in a practical context. We demonstrate the approach for policies designed to limit radiative forcing and discuss extensions to limits on temperature or economic impacts. Metric performance is evaluated by (i) how much actual radiative forcing overshoots the intended stabilization level and (ii) the level of energy consumption permitted. We use this testing approach to study a variety of metrics based on an estimated radiative forcing stabilization time under two climate policy goals. We find that these goal-inspired metrics, if chosen carefully, can exhibit performance improvements over the standard global warming potential (GWP) while maintaining its transparency and ease-of-use. These alternative metrics can significantly reduce the overshoot in radiative forcing observed with the GWP, at a small cost in energy consumption. Moreover, simple metrics can exhibit similar performance improvements to more complex ones.     

A “measurable” definition of sustainable development based on closed cycles of resources and its application to energy systems

Human society consumes resources that it is not able to reproduce. Human activities are still based on “open cycles,” starting from a condition of natural environmental balance and reaching an environmental imbalance. The challenging scope of scientific and technological research towards sustainability appears clear if it is based on this analysis: to find development systems based on “closed cycles” of resources. The challenging objective of realizing closed cycles leads to a definition of sustainability that indicates the path to sustainable development, as well as stating the general principle. It also provides a key to the qualitative measurement of sustainability. This means that the sustainability level of a system can be measured by measuring its capacity to avoid the consumption of resources. Zero consumption is a necessary condition for sustainability, and brings about as a side effect the highly desired “zero-waste” result. Materials entering the proposed endless scheme pass through the process of usefulness without losing their capacity to feed the system again after being used. Thus, the concept of “consumption” itself is replaced by one of “use” when resources are inserted into closed loops capable of feeding human development. The application of the closed cycle sustainability criterion particularly displays its feasibility, and a theoretical guiding role, in the energy sector. Energy vectors such as hydrogen and electricity enable the closure of the energy resources loop by effectively approaching the objective of “zero consumption” (and the side result of “zero waste”) through already demonstrated technological solutions.     

Simultaneous photocatalytic treatment of Cr(VI), Ni(II) and SDBS in aqueous solutions: Evaluation of removal efficiency and energy consumption

Simultaneous photocatalytic reduction of poisonous Cr(VI) and Ni(II) ions, coupled with photocatalytic oxidation of sodium dodecyl benzene sulfonate (SDBS) were studied with a trace amount of commercial titania nanoparticles and by means of a direct-photo-irradiation reactor. The co-presence of metal ions and SDBS causes metal ions reduction as well as SDBS oxidation to enhance and energy efficiency to improve. XRD, XPS and FTIR analysis were used to characterize TiO₂ particles before and after usage with the aim of evaluating the mechanism of reactions. The effect of major operating parameters, pH and temperature, was investigated. Under conditions of [Cr(VI)]₀ = [Ni(II)]₀ = 5 mg/L, [SDBS]₀ = 10 mg/L, [TiO₂] = 40 mg/L, pH 6 and T = 35 °C; the removal efficiencies of 55.4%, 71.2% and 57.2% were obtained, respectively, for Cr(VI) and Ni(II) reduction, as well as for SDBS oxidation, after 110 min operation. The relevant kinetic model jointed with the Arrhenius equation was introduced. Pseudo-first-order reactions are relevant. Energy consumption (electrical and thermal) evaluations revealed that operations at higher temperatures provide significant cost reduction. Meantime, a criterion was proposed for a consistent assessment of this kind of processes.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.     

Integrating long-term stewardship goals into the remediation process: natural resource damages and the Department of Energy

The United States and other developed countries are faced with restoring and managing degraded ecosystems. Evaluations of the degradation of ecological resources can be used for determining ecological risk, making remediation or restoration decisions, aiding stakeholders with future land use decisions, and assessing natural resource damages. Department of Energy (DOE) lands provide a useful case study for examining degradation of ecological resources in light of past or present land uses and natural resource damage assessment (NRDA). We suggest that past site history should be incorporated into the cleanup and restoration phase to reduce the ultimate NRDA costs, and hasten resource recovery. The lands that DOE purchased over 50 years ago ranged from relatively undisturbed to heavily impacted farmland, and the impact that occurred from DOE occupation varies from regeneration of natural ecosystems (benefits) to increased exposure to several stressors (negative effects). During the time of the DOE releases, other changes occurred on the lands, including recovery from the disturbance effects of farming, grazing, and residential occupation, and the cessation of human disturbance. Thus, the injury to natural resources that occurred as a result of chemical and radiological releases occurred on top of recovery of already degraded systems. Both spatial (size and dispersion of patch types) and temporal (past/present/future land use and ecological condition) components are critical aspects of resource evaluation, restoration, and NRDA. For many DOE sites, integrating natural resource restoration with remediation to reduce or eliminate the need for NRDA could be a win-win situation for both responsible parties and natural resource trustees by eliminating costly NRDAs by both sides, and by restoring natural resources to a level that satisfies the trustees, while being cost-effective for the responsible parties. It requires integration of remediation, restoration, and end-state planning to a greater degree than is currently done at most DOE sites.