Remediating Over-Produced and Contaminated Aquifers by Artificial Recharge from Surface Waters

Recharging from open-surface water resources is investigated as a method for remediation of over-produced and contaminated aquifers. The hydraulic and contaminant modeling using the Modflow-2000 and MT3DMS simulation software are resorted for evaluation of the available options. Methodology is developed and illustrated for reviewing the alternative remediation approaches for optimal selection of the best remediation approach to aquifer recharging from surface waters. The effectiveness of the present systematic approach is demonstrated by identifying the best choice among the multifunctional artificial recharge options available for the Great Forest Park in Debrecen, Hungary.     

Ambient Air Quality at the Site of a Former Manufactured Gas Plant

Prior to the 1950's, manufactured gas was commerciallyproduced from the pyrolysis of coal, coke, and oil atfacilities that are termed manufactured gas plants (MGPs). The constituents of residual coal tar present on many MGPsites are an environmental health concern because of theirtoxicity and the possibility for their off-site migration viawater and air. Atmospheric concentrations of five volatileorganic compounds (VOCs, e.g., benzene), sixteen polycyclicaromatic hydrocarbons (PAHs, e.g., naphthalene), and particulate matter less than 10 microns in aerodynamicdiameter (PM₁₀) were measured at the site of a former MGP. Air samples were obtained before, during, and after excavationof subterranean coal tar at the site. The results of thisinvestigation indicate that subterranean coal tar was not aprimary source of VOCs and PAHs in the local atmosphere beforeor after remediation of the site. However, excavation,treatment, blending, and transfer of the coal tar duringremediation generated concentrations of selected aromatic andsemi-volatile organic compounds that were substantiallygreater than typical ambient levels. In addition, these datasuggest that blending and mixing of coal tars could lead toexceedance of the U.S. National Ambient Air Quality Standardfor PM₁₀, although additional research is required to fullyevaluate this possibility. Nuisance odors associated with thesite remediation were likely the result of naphthalene andpossibly isomers of xylene. Air pollutant concentrationsmeasured adjacent to the excavation area and at the siteperimeter during remediation activities were less than therelevant occupational and environmental exposure limits.     

土壤含水层NAPLs污染修复技术的研究进展＊

文章介绍了非水相流体(NAPLs)的性质,综述了地下土壤含水层NAPLs污染治理的六种主要技术,分析了各种技术的原理、特点、治理效果及其研究进展,提出了修复技术存在的问题及今后要做的工作。     

The feasibility of decontamination of reduced saline sediments from copper using the electrokinetic process

The remediation of metal contamination in estuarine and reduced sediments is another challenge for the electrokinetic process. Problems result from the complex chemical composition of saline reduced sediments. In the experiments described here copper was added into saline reduced sediments to simulate the natural situation. Two constant voltages were applied across the electrokinetic cell to investigate the effect of an increase in potential difference on the electrokinetic process. Acetic acid at pH 6 and 4 was also added to the cathode in separate experiments to enhance copper removal. The results from this study showed that in the unenhanced experiments most of copper remained in the soil and was unaffected by the electrokinetic process. At the end of unenhanced electrokinetic experiments, the copper concentration was found only to be slightly changed in the anode region. Up to 21% of the copper was found precipitated near the anode when the applied voltage was 10V and this increased to 25% when the applied voltage was 7V. In the enhanced electrokinetic experiments up to 98% of copper was removed from section 1 and precipitated again in sections 2 and 3. This indicates that a significant amount copper removal from the saline sediments may be achieved by the enhanced electrokinetic process.     

城市河涌污染治理技术的研究进展

随着经济的高速发展,大量污染物排放于城市河涌,导致城市河涌受到严重的污染。采取有效的技术措施治理河涌污染势在必行。结合近年来国内外河涌治理的研究成果,综述了河涌治理的主要技术的原理、特点、存在的问题,并指出目前各项技术的研究重点。     

Electrokinetic remediation of concrete: effect of chelating agents

Contamination of concrete at various nuclear power plants and spent nuclear fuel reprocessing facilities by radionuclides represents a significant problem for the world's nuclear power industries and nuclear waste management. The present publication summarizes the most recently published data on Electrokinetic Remediation (EK) of various concrete installations and advantageous effects of the combination of EK with different chelating agents. The specific aspects of decontamination of concrete and mortar surfaces are analyzed, such as: (a) effect of chelating agents (EDTA, citric acid), (b) effect of the zeta-potential (zeta) of concrete surface, (c) effects of sorption and complex formation equilibrium, and (d) specific advantages and problems of the electrokinetic decontamination process. The results of laboratory and in situ tests of chelating agent assisted EK removal of radionuclides are reported. It is demonstrated that the correct combination of EK with specific chelating agents can be effectively employed for decontamination of concrete surfaces.     

Pressure-assisted chelation extraction of lead from contaminated soil

Soil contamination by metallic elements including lead occurs frequently. Contaminant metals in soil pose a serious risk to public health and groundwater supplies. Extraction using chelants is seen as a remediation option; however, it is often hampered by access to the contaminants that are shielded by the soil matrix. We have developed a novel extraction technique that utilizes a mildly elevated pressure in consecutive cycles of compression and decompression along with a chelating agent for the soil slurry. Complete extraction of 3300 mg/kg of Pb from soil was achieved by 100 mM of EDTA (ethylenediaminetetraacetic acid) in 10 min using 20 pressure cycles at 150 psi (10 atm). Extraction was studied according to pressure, number of pressure cycles, chelant concentration, solid content, pH, agitation, and use of consecutive washings. Heightened extraction is attributed to fracturing of the soil particles that leads to enhanced contaminant exposure to the chelating agent.     

Three-dimensional density-dependent flow and multicomponent reactive transport modeling of chlorinated solvent oxidation by potassium permanganate

A popular method for the treatment of aquifers contaminated with chlorinated solvents is chemical oxidation based on the injection of potassium permanganate (KMnO₄). Both the high density (1025 gL^− 1) and reactivity of the treatment solution influence the fate of permanganate (MnO₄) in the subsurface and affect the degree of contaminant treatment. The MIN3P multicomponent reactive transport code was enhanced to simulate permanganate-based remediation, to evaluate the pathways of MnO₄ utilization, and to assess the role of density contrasts for the delivery of the treatment solution. The modified code (MIN3P-D) provides a direct coupling between density-dependent fluid flow, solute transport, contaminant treatment, and geochemical reactions. The model is used to simulate a field trial of TCE oxidation in a sandy aquifer that is underlain by an aquitard. Three-dimensional simulations are conducted for a coupled reactive system comprised of ten aqueous components, two mineral phases, TCE (dissolved, adsorbed, and NAPL), reactive organic matter, and including ion exchange reactions. Model parameters are constrained by literature data and a detailed data set from the field site under investigation. The general spatial and transient evolution in observed concentrations of the oxidant, dissolved TCE, and reaction products are adequately reproduced by the simulations. The model elucidates the important role of density-induced flow and transport on the distribution of the treatment solution into NAPL containing regions located at the aquifer–aquitard interface. Model results further suggest that reactions that do not directly affect the stability of MnO₄ have a negligible effect on solution density and MnO₄ delivery.     

Highly charged swelling mica reduces Cu bioavailability in Cu-contaminated soils

This is the first test of a highly charged swelling mica's (Na-2-mica) ability to reduce the plant-absorbed Cu in Cu-contaminated soils from Chile. Perennial ryegrass (Lolium perenne L.) was grown in two acid soils (Sector 2: pH 4.2, total Cu = 172 mg Cu kg⁻¹ and Sector 3: pH 4.2, total Cu = 112 mg Cu kg⁻¹) amended with 0.5% and 1% (w/w) mica, and 1% (w/w) montmorillonite. At 10 weeks of growth, both mica treatments decreased the shoot Cu of ryegrass grown in Sector 2 producing shoot Cu concentrations above 21-22 mg Cu kg⁻¹ (the phytotoxicity threshold for that species), yet the mica treatments did not reduce shoot Cu concentrations when grown in Sector 3, which were at a typical level. The mica treatments improved shoot growth in Sector 3 by reducing free and extractable Cu to low enough levels where other nutrients could compete for plant absorption and translocation. In addition, the mica treatments improved root growth in both soils, and the 1% mica treatment reduced root Cu in both soils. This swelling mica warrants further testing of its ability to assist re-vegetation and reduce Cu bioavailability in Cu-contaminated surface soils.     

Application of bioassays to evaluate a copper contaminated soil before and after a pilot-scale electrokinetic remediation

Remediation programmes are considered to be complete when human risk-based criteria are met. However, these targets are often unsatisfied with the ecological parameters that may be important with regard to future soil use. Five soil subsamples, collecting along a pilot-scale soil column after electrokinetic treatment, were studied, from which about 42.0%-93.3% soil Cu had been successfully removed. A series of biological assays including soil microbial biomass carbon, basal soil respiration, soil urease activity, earthworm assays, and seed assays were used to evaluate their ecological risks. The results showed that the bioassay data from the treatment variants did not supposedly reflecting the decreased soil Cu concentrations after the electrokinetic treatment, but were highly correlated with some soil physicochemical characteristics. It suggests that bioassays are necessary to assess the ecotoxicity of soil after electrokinetic treatment.