近断层地震动考虑能量损伤效应的非弹性强度需求

由于靠近断层处地震地面运动中速度脉冲作用的存在,导致传统的基于瞬时加速度反应谱的抗震设计,不能有效考虑由此带来的巨大能量耗散和位移需求。笔者采用代表性的脉冲型实际近场地震记录和人工模拟三角函数地震动时程,在分析累积输入地震动耗能和结构位移间关系基础上,提出了等效速度比的表达式;给出了近场地震动的等效变形需求表达式;提出了等价延性系数的概念,来考虑由于地震动能量耗散对结构的强度需求;经非线性时程分析方法对其稳定性进行了验证比较,有利于增强结构的安全性。     

事物安全演化过程的基本理论研究

安全状态的演化过程是事物发展变化过程的重要组成部分.事物的安全演化过程符合从量变到质变的原理,即服从"安全流变-突变"规律.基于事物"安全流变-突变"规律,建立理论模型,并分析和描述事物的安全演化过程.事物"安全流变-突变"规律的研究为揭示事物的安全本质规律奠定了基础.     

云天化3#循环流化床锅炉项目技术经济分析

云天化股份公司在2004年建造了3#循环流化床锅炉，以煤代气。它可以缓解公司原料天然气的紧张状况，并能带来很大的经济效益。从技术经济的角度对该项目的技术先进性、可靠性及内部收益率、投资回收期、净现值等技术指标进行了分析。     

厌氧-好氧一体化反应器处理高浓度有机废水的运行特性研究

本实验采用新型厌氧—好氧一体化反应器处理高浓度有机废水,主要研究了系统的启动与运行性能,并对系统的NH3 N去除效果作了初步考察。实验结果表明:在16℃～24℃的自然温度下,采用递增负荷、厌氧和好氧分期启动的方式,系统可在38天内达到较好的启动效果;在系统负荷运行期内,当系统总进水COD浓度平均值为3601 8mg/L,总出水COD浓度平均值为384 0mg/L,系统容积负荷平均值为2 54kgCOD/(m3·d),系统总HRT平均值为35 1h时,系统总COD去除率平均值达90 6%。实验还发现:当进水NH3 N浓度为280 3～350 7mg/L,整个系统的NH3 N去除率在68 5%～91 7%,平均为81 0%。由此说明,本反应器具有很好的COD去除性能和NH3 N去除效果,适合于处理COD浓度高且含有中等NH3 N浓度的有机废水。     

The challenges of sustainability in mining regions: The coal mining region of Santa Catarina, Brazil

Throughout history, mining communities have invariably found themselves striving for a good quality of life and a long‐term future. In the 21st century, problems of maintaining the economic vitality of mining regions are now compounded by concerns about the biophysical integrity of the local environment. In regions of the world where the economic viability of the resource is marginal and achieving a reasonable quality of life is a daily struggle, sustainable mining may seem to be a dubious prospect at best. Yet the twin imperatives of global political forces and burgeoning environmental concerns are requiring industry, governments and other interests to re‐conceptualize the way in which mining takes place in communities. Although mining itself may not be seen as an industry that contributes to the achievement of environmental objectives, it could — with careful planning — be used as a tool to foster a more sustainable and healthier community. This argument is considered in the context of the coal mining region of Santa Catarina, Brazil.     

Recycled sand in lime-based mortars

The increasing awareness of the society about safe guarding heritage buildings and at the same time protecting the environment promotes strategies of combining principles of restoration with environmentally friendly materials and techniques. Along these lines, an experimental program was carried out in order to investigate the possibility of producing repair, lime-based mortars used in historic buildings incorporating secondary materials. The alternative material tested was recycled fine aggregates originating from mixed construction and demolition waste. Extensive tests on the raw materials have been performed and mortar mixtures were produced using different binding systems with natural, standard and recycled sand in order to compare their mechanical, physical and microstructure properties. The study reveals the improved behavior of lime mortars, even at early ages, due to the reaction of lime with the Al and Si constituents of the fine recycled sand. The role of the recycled sand was more beneficial in lime mortars rather than the lime–pozzolan or lime–pozzolan–cement mortars as a decrease in their performance was recorded in the latter cases due to the mortars’ structure.     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

流化床O2/CO2气氛下添加SiO2对燃煤PM2.5的控制

采用小型流化床研究了在O2/CO2气氛下添加SiO2对PM2.5(空气动力学直径小于2.5 μm的颗粒物)的控制,试验在1123 K、O2/CO2气氛下进行,并采用荷电低压撞击器(ELPI)采集和分析燃烧后的PM2.5.结果表明,添加SiO2是燃烧过程中影响PM2.5生成的重要因素.添加SiO2后,生成PM1的质量浓度均降低,而PM1-2.5的质量浓度均略有增加;PM2.5质量粒径分布均呈双峰分布,峰值分别出现在0.2 μm和2.0μm左右.随着SiO2添加量的增加,PM2.5中的S、K、Na、Cu和Pb元素的含量呈减少的趋势;随着颗粒粒径减小,S、K、Na、Cu和Pb元素的含量有增高的趋势.     

流化床焚烧含盐苯胺废液的NOx排放特性

在流化床焚烧实验装置上进行含盐苯胺(C6H5NH2)废液的焚烧实验研究,用IMR-IMR2800P废气分析仪对焚烧尾气成分进行了在线监测,考察了焚烧工艺条件对NOx排放浓度的影响规律.结果显示:采用分级燃烧工艺和提高焚烧温度,可以降低NOx浓度;增大进料速率却导致NOx排放浓度的增加.当过剩空气系数(α)低于1.0时,NOx排放浓度随着α的增大急剧上升;大于1.1时,NOx排放浓度随α增加而减小.苯胺废液高温焚烧时添加氯化钠能降低NOx排放.