The Effects of Magnesium and Ammonium Additions on Phosphate Recovery from Greenhouse Wastewater

Phosphorus recovery from greenhouse wastewater, using precipitation-crystallization, was conducted under three levels of calcium concentration, 304 mg/L (7.6 mmol/L), 384 mg/L (9.6 mmol/L), and 480 mg/L (12 mmol/L), and also with additions of ammonium and magnesium into the wastewater. Jar test results confirmed high phosphate removal, with more than 90% of the removal achieved with a pH as low as 7.7. Under the low calcium concentration, ammonium addition affected the chemical reactions at pH lower than 8.0, where struvite was produced; when the pH was raised to 8.8, other calcium compounds dominated the precipitation. Under the medium calcium concentration, ammonium and magnesium addition helped struvite precipitation in the low pH range. Hydroxyapatite (HAP) was the main product. Under the high calcium concentration, ammonium addition showed no effects on the precipitation.     

Phosphate Recovery from Greenhouse Wastewater

A study was conducted to investigate the suitability of phosphate recovery from greenhouse wastewaters by using precipitation/crystallization process. More than 90% of the phosphate could be removed from the greenhouse wastewater. Various calcium phosphate salts were obtained in the process; hydroxyapatite [Ca₅(PO₄)₃OH] could be the main product from the precipitates. Phosphate removal was affected by the presence of magnesium ion in wastewaters. An increase of magnesium concentrations in wastewaters decreased phosphate removal rates. The chemical contents of precipitates in terms of calcium, magnesium and phosphate were affected by calcium to magnesium molar ratio. Higher calcium contents were obtained at wastewaters with high calcium to magnesium molar ratio. An addition of magnesium did not affect the potassium contents in the precipitates. K‐struvite, MgKPO₄·6H₂O, was not the major product in the precipitate, even with addition of a large quantity of magnesium.     

Distribution of environmentally sensitive elements in residential soils near a coal-fired power plant: Potential risks to ecology and children’s health

One hundred and twelve soil samples were collected from residential areas surrounding a coal-fired power plant at Huainan City, Anhui Province, China. The concentrations of environmentally sensitive elements (ESEs As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn) in soil samples were determined, and their potential ecological and health risks were assessed. Mean concentrations of ESEs in the downwind soils of the power plant are relatively higher than those in the upwind soils, pointing to a potential ESEs input from coal combustion. The calculated ecological risk of ESEs in soils indicates a relatively low ecological risk. Hazard quotient (HQ) of ESEs in downwind soils is 1.5, suggesting a potential health risk for children. However, the carcinogenic risk values of ESEs in soils are within the acceptable non-hazardous range of 1E−06–1E−04.     

Swine wastewater treatment in a two stage sequencing batch reactor using real‐time control

Abstract

A laboratory scale two‐stage sequencing batch reactor (TSSBR) was used to study the effectiveness of pH as a real‐time control parameter in swine wastewater treatment. A Ringlace media was inserted into the A/O (Anoxic/Oxic) reactor for bacteria immobilization. The TSSBR was subjected to three levels of organic loading. The pH and ORP (Oxidation Reduction Potential) patterns obtained were consistent with distinct features, enabling the real‐time control strategy to effectively set a flexible aeration time pending on influent concentration, hence resulting in flexible cycle time and HRT (Hydraulic Retention Time) for the system. The real‐time process ensured a removal efficiency of over 99% and 95%, respectively, for ammonia and TOC (Total Organic Carbon). For NO₃ ^‐‐N and PO₄ ^‐3, the run with influent TOC = 4,000 mg/L yielded the most efficient removal of 61% and 95%, respectively. Test results suggest that pH can be a viable tool for on‐line real‐time control of a biological treatment process.     

Phytoavailability and extractability of potassium,magnesium and manganese in calcareous soil amended with olive oil wastewater

Abstract

Land disposal of olive oil wastewater using it as a soil amendment requires a knowledge of the effects that its application may produce on the status of the mineral nutrients in the plant‐soil system. A pot experiment using calcareous soil was performed in a growth chamber to examine the effects of olive oil wastewater on the availability and postharvest soil extractability of K, Mg and Mn. The experiment included 6 treatments: two rates of olive oil wastewater, two mineral fertilizer treatments containing K (which supplied K in amounts equivalent to the K supplied by the olive oil wastewater treatments), a K‐free mineral fertilizer treatment, and a control. The pots were sown with ryegrass as the test plant, harvesting 3 times at intervals of one month. Olive oil wastewater has demonstrated a considerable capacity for supplying K that can be assimilated by the plant, tending in fact to surpass the mineral potassium fertilizer tested. The application of olive oil wastewater tends to reduce the concentration of Mg in the plant, similarly to the effect of adding mineral potassium fertilizer. An enhancement of Mn availability takes place in the soil amended with olive oil wastewater, which on occasion has produced Mn concentrations in plant that could be considered phytotoxic or at least excessive. After harvesting, we observed an increase in the amount of exchangeable K in soil with added industrial wastewater. However, these increases are lower than those in soil treated with mineral potassium fertilizer. The levels of exchangeable, carbonate‐bound, organic‐bound and residual Mg in soil were higher in treatments incorporating olive oil wastewater than in those with added mineral K, with the opposite tendency occurring in the amount of Fe‐Mn oxides‐bound Mg in soil. Treatments based on olive oil wastewater, especially in high doses, increased the amount of exchangeable and carbonate‐bound Mn in soil, in comparison with treatments adding mineral fertilizers with or without K. In contrast, the addition of industrial wastewater caused a drop in the amount of Fe‐Mn oxides‐bound and organic‐bound Mn in soil.     

产油微藻培养与回收的关键技术研究进展

寻找廉价而高效的替代原料是实现生物柴油产业化的关键所在.微藻以含油量高、生长周期短、环境适应能力强、生物产量高等优点,有望成为一种极具潜力的生物柴油生产原料.然而,目前尚存在微藻培养低效成本高和微藻回收效率低两大难题.综述了微藻培养与回收过程中的关键技术,并对存在的两大难题及其改进技术进行了详细的探讨.最后,总结并展望了微藻培养、回收技术未来的发展趋势.     

生物填料地下渗滤系统对生活污水的脱氮

将草甸棕壤、炉渣和活性污泥等基质按体积比13∶6∶1配制生物填料,研究了生物填料地下渗滤系统（subsurface wastewater infiltration system,SWIS）在不同的水力负荷和污染负荷条件下对校园生活污水的脱氮效果。场地实验结果表明,当BOD5负荷为12.0 g BOD5/（m2·d）,表面水力负荷为0.04-0.10 m3/（m2·d）时,SWIS对NH＋4-N和TN的平均去除率分别为92.4%和82.0%。当水力负荷为0.08 m3/（m2·d）,BOD5负荷9.3-16.8 g BOD5/（m2·d）时,SWIS对NH＋4-N和TN的平均去除率为92.7%和81.2%。SWIS中氧化还原电位（oxygen reduction potential,ORP）随进水水力负荷和BOD5负荷的增加而降低,脱氮效率下降。综合出水水质和处理效率,适宜的水力负荷和污染负荷分别为0.065 m3/（m2·d）和12.0 g BOD5/（m2·d）。在此条件下,SWIS的启动周期为25-30 d。出水水质均优于《城市污水再生利用-景观环境用水水质》（GB/T18921-2002）标准,且处理效果稳定,抗负荷冲击能力强。     

有机污染胁迫对人工湿地中浮萍抗氧化系统的影响

湿地植物在处理高负荷有机废水时会受到不同程度的氧化胁迫。本研究基于对浮萍的有机污染胁迫模拟系统,通过对浮萍脂质过氧化和抗氧化防御系统的监测与分析,研究了浮萍对有机污染胁迫的耐受能力及胁迫去除后浮萍的恢复规律。结果表明,浮萍对有机污染胁迫具有较高的耐受性,在胁迫去除后,具有一定的恢复能力。在COD小于400mg/L时,浮萍并未受到氧化胁迫;当COD达到800 mg/L时,浮萍体内ROS含量上升,细胞膜脂过氧化加剧,但抗氧化酶活性升高,抗氧化物质含量增加,浮萍可保持生长,胁迫去除后,抗氧化防御系统可恢复到对照水平;当COD过高（≥1 000mg/L）,ROS急剧上升,抗氧化防御系统遭受破坏,造成不可逆伤害,胁迫去除后不能恢复正常生长。     

UASB反应器降解活性染料废水的特性

中温（35±1）℃条件下,采用上流式厌氧污泥床（upflowanaerobicsludgebed,简称UASB）反应器处理了含蒽醌类-活性艳蓝（c．I．ReactiveBlue5,简称K—GR）或偶氮类-活性艳红（C．I．ReactiveRed20,简称KD-8B;C．I．ReactiveRed2,简称X-3B）模拟染料废水,重点研究了回流比对染料脱色率和COD去除率的影响,在最佳回流比的条件下,探讨HRT（hydraulicretentiontime）对脱色的影响和不同结构染料的脱色效果,并初步分析了脱色机理。结果表明,适宜的回流比有利于提高系统的脱色率;控制回流比和HRT分别为2和24h,当模拟废水中染料的浓度为100mg／L时,COD去除率和脱色率分别为90％～96％和85％～92％;蒽醌和偶氮类染料的脱色是通过偶氮键和葸醌共轭结构的断裂来实现的。     

昆明市污水排水系统产甲烷规律的模拟实验研究

通过对昆明市餐饮和居民生活污水厌氧模拟实验研究,初步探讨生活污水中CH4的产生规律,实验结果表明,在自然条件下,餐饮和居民生活污水中产生的甲烷浓度最大值分别为1.63 mg/L和3.82 mg/L。并且将COD、硫酸盐、硫化物、TN的浓度变化与甲烷浓度变化进行Pearson简单相关性分析,结果表明,1/COD、COD/硫酸盐和1/TN与甲烷在置信度为0.01时极显著相关,硫化物与甲烷在置信度为0.05时不相关;COD、硫酸盐和TN浓度的变化对生活污水中甲烷的产生起关键性作用。对居民生活污水中甲烷产生规律进行温度和pH控制分析研究,实验结果表明,生活污水在25~30℃时,24 h内甲烷产生量最大值为8.6494 mg/L,明显大于其他温度段的甲烷产生量;在pH为7~8之间时,甲烷的产生量在24 h内达到的最大值为3.0477 mg/L,明显高于其他pH控制段的甲烷产生量。