薄壁厚内螺纹的冷挤压

薄壁厚内螺纹的冷挤压成形是道难题,通过采用有效的工艺措施,确保了产品质量,拓宽了内螺纹冷挤压成形的适用范围。     

齿形零件的冷摆辗成形

介绍了摆辗成形工艺的基本原理,综述了齿形零件冷摆辗精密成形和摆动辗压设备研制的概况.指明用压力加工方法,特别是冷摆辗工艺.加工精密齿形可提高零件机械性能,节能节材.     

抛丸处理在钢铁冷锻加工中的应用

钢铁冷锻加工中的磷化工序一般采用酸洗法去除毛坯上的氧化膜。现介绍用抛丸处理工艺替代酸洗方法,可以大幅度减少工业污染,降低生产成本,提高工艺质量。     

苏州河表层沉积物中总汞测定的研究

采用金汞齐富集-冷原子吸收光谱法直接测定苏州河表层沉积物中的总汞。结果表明:该方法在0.00～200ng范围内呈良好线性关系,检出限为0.005mg/kg(样品以0.2g计)。实际样品测定的RSD为1.24%～4.36%,加标回收率为91.8%～101%。与原子荧光光谱法相比,两种方法测定的结果没有显著差异。     

低温条件下污水处理运行研究

低温是造成寒冷地区冬季生活污水生化处理效果差的主要原因。当温度降低至4cC左右时,活性污泥中大多数微生物的生长活性受到抑制,只有少数的耐冷微生物可以存活下来并保持一定的活性。本课题组以往的研究结果证明：在我国北方地区,完全可以分离到在低温下高效降解污水中有机物的耐冷细菌。通过投加耐冷茵可使污水的去除效率大大提高。但由于投加的耐冷茵的流失等原因,必须隔一定时间再次投菌,既费时费力,又增加投资。     

寒冷地区亚麻废水处理工艺的对比分析

亚麻废水是一种较难降解的废水,采用气浮-完全推流曝气工艺和UASB法处理亚麻加工厂废水,从能耗、工艺特点、运行管理上进行对比。结果表明,采用气浮-完全推流曝气工艺在处理此类废水中可收到良好成效,且废水处理成本为0.6-0.7元/m3。     

松嫩平原部分县域重点工业企业发展与污染防治同步策略探讨

县域工业污染防治是工业化、城镇化进程中一个不可忽视的问题。应注重排放COD、烟尘等主要污染物浓度高且量较大的重点行业和企业,根据这些企业的运行规律和当地的气候特点,深入开展污染防治。以松嫩平原北部,有代表性的工业城市所辖县为重点,进行了探讨。     

The continuing conundrum of the LEA proteins

Research into late embryogenesis abundant (LEA) proteins has been ongoing for more than 20 years but, although there is a strong association of LEA proteins with abiotic stress tolerance particularly dehydration and cold stress, for most of that time, their function has been entirely obscure. After their initial discovery in plant seeds, three major groups (numbered 1, 2 and 3) of LEA proteins have been described in a range of different plants and plant tissues. Homologues of groups 1 and 3 proteins have also been found in bacteria and in certain invertebrates. In this review, we present some new data, survey the biochemistry, biophysics and bioinformatics of the LEA proteins and highlight several possible functions. These include roles as antioxidants and as membrane and protein stabilisers during water stress, either by direct interaction or by acting as molecular shields. Along with other hydrophilic proteins and compatible solutes, LEA proteins might also serve as “space fillers” to prevent cellular collapse at low water activities. This multifunctional capacity of the LEA proteins is probably attributable in part to their structural plasticity, as they are largely lacking in secondary structure in the fully hydrated state, but can become more folded during water stress and/or through association with membrane surfaces. The challenge now facing researchers investigating these enigmatic proteins is to make sense of the various in vitro defined functions in the living cell: Are the LEA proteins truly multi-talented, or are they still just misunderstood?     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

三烧溴化锂集中制冷空调系统改建设计

武钢三烧区域改建了二台大连三洋蒸汽型双效溴化锂吸收式制冷机。叙述了该改建项目的主机选型、参数选定、设计特点等。