Cumulative effect assessment in Canada: a regional framework for aquatic ecosystems

Sustainable development of the aquatic environment depends upon routine and defensible cumulative effects assessment (CEA). CEA is the process of predicting the consequences of development relative to an assessment of existing environmental quality. Theoretically, it provides an on-going mechanism to evaluate if levels of development exceed the environment's assimilative capacity; i.e., its ability to sustain itself. In practice, the link between CEA and sustainable development has not been realized because CEA concepts and methods have developed along two dichotomous tracks. One track views CEA as an extension of the environmental assessment (EA) process for project developments. Under this track, stressor-based (S-B) methods have been developed where the emphasis is on local, project-related stressors, their link with aquatic indicators, and the potential for environmental effects through stressor-indicator interactions. S-B methods focus on the proposed development and prediction of project-related effects. They lack a mechanism to quantify existing aquatic quality especially at scales broader than an isolated development. This limitation results in the prediction of potential effects relative to a poorly defined baseline state. The other track views CEA as a broader, regional assessment tool where effects-based (E-B) methods specialize in quantification of existing aquatic effects over broad spatial scales. However, the predictive capabilities of E-B methods are limited because they are retrospective, i.e., the stressor causing the effect is identified after the effect has been measured. When used in isolation, S-B and E-B methods do not address CEA in the context necessary for sustainable development. However, if the strengths of these approaches were integrated into a holistic framework for CEA, an operational mechanism would exist to better monitor and assess sustainable development of our aquatic resources. This paper reviews the existing conceptual basis of CEA in Canada including existing methodologies, limitations and strengths. A conceptual framework for integrating project-based and regional-based CEA is presented.     

共振光散射技术在环境分析中的应用

共振光散射技术是一项在普通荧光分光光度计上进行测量的光散射技术,文章简要介绍了光散射现象,共振光散射的基本原理并作了定量基础讨论,对共振光散射技术在环境分析中的应用作了初步研究。     

悬浮物对三峡水库水质测定结果的影响

以长江寸滩断面和嘉陵江大溪沟断面水样为测定样品,探讨了悬浮物对三峡水库水质测定结果的影响,提出在三峡水库水质监测中,应对经0.45μm滤膜过滤的滤液进行指标测定,同时测定悬浮物含量,并对悬浮物进行组分分析;建议在地表水环境质量标准中,纳入悬浮物项目。     

地面水环境质量评价的有时序多目标决策方法

将有时序多目标决策方法应用于地面水环境质量优势的比较，介绍了决策方法的原理和评价步骤。实例分析表明该方法计算过程简便，分辨率高，排序结果与实际环境质量状况相符合。     

酸性法测定高锰酸盐指数加热时间的选择

酸性法测定高锰酸盐指数，会因实验条件的差异产生不同的结果。对不同加热时间，加热方式等因素进行了试验，结果表明加热时间以水浴加热沸腾３０ｍｉｎ或电炉直接加热８ｍｉｎ为宜。     

关于模糊数学在环境质量综合评判中“最大隶属度”原则不适用性的讨论

通过对模糊数学在环境质量综合评判中的分析，指出“最大隶属度”原则的不适用性，并根据环境质量分级所存在的固有关系提出改进的方法。     

环境样品中痕量锰的催化动力学测定法

对环境样品中痕量锰的催化动力学测定方法进行简要评述，引述文献１６篇。     

液氯意外泄漏的应急监测

介绍了京沪高速“3.29”液氯意外泄漏污染事故的应急监测中正确确立气、土、水、植物等环境介质作为监测对象,科学确定氯、氯化氢为监测因子,并因事制宜科学地选择监测方法,为事故处理指挥部迅速正确处理事故提供了优质快速的技术支持。     

徐州城市表层土壤中重金属的富积、分布特征与环境风险

研究了徐州城市表层土壤的21个样品中30种元素的富集与分布特征。结果表明,与我国土壤元素的背景值(算术平均值)相比,表层土壤中Zn、Cd、As、Hg、Sb、Sn、Ag等元素富集大;Fe、Se、Sc、Ba、Bi、Pb、Cu、Ni、Cr、Mn、Mo、Be、Ti、Al、Ga、Li、Co等元素的富集较小。污染元素的空间分布特征显示了Zn、Cu、Pb、Cd等元素主要与交通运输等扩散污染源相关,而元素As、Sb的空间分布主要与工业污染源(点源)有关。环境风险指数的计算结果表明,表层土壤中重金属污染具有较大的环境风险,其中属于中等环境风险级别以上的样品占近40%,而且高风险区域主要集中在钢铁厂和化机厂等工业区范围内。     

层级化环境质量数据网络直报业务系统的设计和应用

分析了目前环境监测部门的数据传输现状,设计了基于VPN互联网络的环境质量数据层级化直报业务系统,介绍了网络直报系统的业务模型、数据审核和存储策略、系统功能设计及其应用等。