煤矸石复合吸附剂对Zn~(2+)的吸附性能

采用某洗煤厂的煤矸石和天然粘土石灰石作为主要原料,添加适量的氯化铝制备吸附剂对Zn~(2+)进行吸附,运用SEM技术对吸附剂进行了表征,研究了不同因素对Zn~(2+)去除率的影响,并探讨了吸附机理。实验结果表明:当反应温度为20℃、振荡时间为70 min、废水pH为6、吸附剂投加量为0.5 g时,Zn~(2+)去除率达到96.28%。煤矸石复合吸附剂对Zn~(2+)的吸附符合准二级动力学方程,在高浓度时符合Langmuir等温吸附模型低浓度时符合Freundlich等温吸附模型,且吸附是易发生的。     

医疗废物高温蒸汽处理工艺的二次污染控制——以孝感市医疗废物处置中心为例

以孝感市医疗废物处置中心为例,介绍了高温蒸汽处理过程的二次污染控制工艺。结果表明:采用生物脱臭处理工艺,废气中的恶臭污染物可以达到《恶臭污染排放控制标准》(GB 14554—1993)相应排放速率限值要求;采用生化和物化相结合的废水处理工艺,出水水质可以满足《污水综合排放标准》(GB 8978—1996)的二级排放标准要求。     

Eco-design improvement for the diaphragm forming process

This paper proposes an eco-design method to suggest improvements over an existing diaphragm forming process (DFP). In the proposed method, a systematic procedure is developed to provide eco-design guidance to engineers, and it includes four steps. In Step 1, design functions are analysed through functional diagrams to provide the information of sub-functions and functional flows. In Step 2, the eco-design requirements are captured via quality functional deployment (QFD) and then translated to design functions via functional analysis (FA). Then, the design functions are prioritized according to the eco-design requirements in considerations. In Step 3, the prioritized design functions are used to generate possible design concepts through the morphological chart. In Step 4, the generated concepts are assessed based on the energy use and process time of DFP. The utility of the proposed method is to adapt quality tools for continual improvements in the context of eco-design. An existing DFP is used for this work to demonstrate and validate the method’s applicability. The result of this research shows that the integration of QFD and FA can systematically guide the generation of new eco-design concepts for DFP with less dependence of design intuitions.     

钢线拉丝及表面处理生产线成套装备

主要论述了一种钢线拉丝及表面处理生产线成套装备的设计。该生产线的生产方式是多根钢线在牵引动力系统的作用下依次穿过各种处理设备,完成各道工序,实现钢线完成表面处理的目的。这个生产过程中,钢线可以完成放线、脱脂、退火、镀镍、造膜、烘干及收线一体化的工序。采用立体式布置,空间利用更为合理。     

The development of a microscale strain measurement system applied to sheet bulge hydroforming

Micro and multiscale sheet metal forming processes represent new and attractive solutions to many manufacturing problems. However, evaluating the strains in these products is a difficult endeavor. Larger organizations are utilizing commercially available microscale digital image correlation systems to measure the strains in microscale parts or on macroscale parts with critical microscale features. The cost of these strain measurement systems is preventing smaller research and development organizations from entering this challenging area or they are forgoing the ability to determine strains. The present paper describes the development of a method for creating microscale grids and measuring strains on microscale parts or microscale locations on larger parts. The method developed was able to measure true strains up to 0.618 for square grids that are 127 μm measured from center-to-center. Microscale strains resulting from sheet bulge hydroforming experiments using 11 mm, 5 mm, and 1 mm diameter dies were evaluated and material properties of the sheet metal were estimated based upon the strains measured in conjunction with FEA simulations and compared to analytical solutions and microscale tension tests. The material properties determined using the strains and FEM approach were consistent with the other methods.     

环境产业金融支持的框架构建分析

现阶段我国环境产业面临严峻的资本形成不足、发展资金短缺的困境，对产业发展形成严重制约。环境产业金融支持理应成为推进我国环境产业和经济可持续发展的战略性机制和基本途径。文章从环境产业资本形成、投资效率，金融运行三个角度进行了分析，梳理了环境产业发展进程中金融支持的内生逻辑，为环境产业金融支持的框架构建提供了理论依据。     

水体富营养化及其防治

由于人类活动的影响,氮磷等营养物质大量排入水体并在其中不断积累,引起部分藻类和水生生物过度繁殖,造成水体的富营养化.本文对水体富营养化的形成机理、危害作了简要概述,着重从控制外源输入、降低内源负荷、去除营养物等三个方面,对现有的水体富营养化防治措施进行了概括和比较,并讨论了相应的发展方向,提出了综合防治策略.     

羟基镁铝复合物对于水体中镉的去除研究

近年来,由于受到各种工业废水和固体废弃物的影响,使得水体中的重金属含量不断上升,镉污染就是受关注度较高的一种重金属污染,居民若长期食用含镉稻米或含镉水,会引发骨痛病,严重时还会危害人体生命健康。羟基镁铝复合物是在强化混凝过程中形成的,是一种较好的复合材料,能够有效去除水体中的镉。本次主要研究这种材料对于Cd离子的去除效果,可以得出如下结论：pH、混凝剂Al13是较关键的影响因素,这些因素均影响着羟基镁铝复合物的形成情况以及其对于Cd离子的去除效果。通过一些表征说明,镁铝复合物的形态呈无定形,比表面积较大,成分也较复杂,并且在一定pH保证下,聚合度较高的Al13形成复合物的颗粒较大,对于Cd离子的去除起到积极的促进作用。     

生物质秸秆成型燃料的制备、应用与市场

介绍了国内外生物质能源技术的应用及生物质燃料的研发制备情况,分析了目前生物质燃料制备技术、资源化利用的现状以及存在的问题,针对符合中国国情的生物质(秸秆)成型燃料生产技术及市场需求进行了分析探讨。     

循环经济产业体系论纲

循环经济的核心是物质在产业间和产业与环境间的循环流动。发展循环经济要落实到具体的产业和企业上。需搞清具有物质循环利用关系的产业及其间的关系。为区别传统经济产业间的关系，避免走入用传统产业理论指导循环经济建设的误区，本文提出产业体系和循环经济产业体系的概念。并将若干与某种生产要素有关的产业相互联系、相互制约而构成的整体称为产业体系。以物质要素循环利用关系为纽带的产业体系称为循环经济产业体系。根据物质在环境社会系统中的流动模式。将循环经济产业体系中的产业分成物资产业、人的产业和环境产业三大类。要在传统（线性）经济的基础上发展循环经济。需理性地按生态学原理规范经济活动。重点强化废弃物再生和回用的环境产业。使之同物资产业和人的产业相协调。产业体系是对产业结构概念的发展。循环经济产业体系是循环经济理论和建设的重要内容。构建循环经济理论体系、出台有关法律法规和产业政策。是循环经济建设工作的重点。