煤层底板隐伏陷落柱突水预测及采前注浆加固评价

华北型煤矿开采受底板岩溶强含水层威胁，通过对淮南张集矿1613A工作面底板隐伏岩溶陷落柱突水危险性分析，采用FLAC3D方法模拟采动条件下岩溶陷落柱活化过程。模拟结果显示:陷落柱上方的煤层底板岩体发生塑性变形，导致陷落柱附近岩体失稳，陷落柱筒壁产生局部剪切破坏，剪切破坏位置易导致奥灰强含水层发生陷落柱突水。采前采用注浆方法改造岩溶陷落柱，对改造后的陷落柱进行数值模拟分析，其内部注浆岩体对陷落柱筒壁具有良好的支撑作用，抑制了筒壁位置剪切破坏的发生，使有效隔水层厚度增大，降低了陷落柱突水的危险性。     

Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites.     

Exhaust emission inventory of typical construction machinery and its contribution to atmospheric pollutants in Chengdu, China

To study the emission characteristics of typical construction machinery in Chengdu, 12 construction machinery (excavators, bulldozers, loaders, and forklifts) under idling mode, moving mode, and working mode, were tested using a portable emission measurement system (PEMS). Under three operating modes, the typical construction machinery in the working mode was higher in the fuel-based average emission factors of PM_2.5 and NO_x, while the fuel-based average emission factors of HC and CO were higher in idling mode. Integrated the results of investigation on ownership and activity levels of construction machinery, an exhaust emission inventory of typical construction machinery of Chengdu in 2018 was established according to the recommendation method. The annual emission of PM_2.5, NO_x, HC, and CO were 1.67 × 10⁶, 1.61 × 10⁸, 3.83 × 10⁶, and 1.26 × 10⁷ kg, respectively, and the excavator contributed the maximum emissions, accounting for an average proportion of 43.95%. The emission of construction machinery in Chengdu exhibited a clear monthly trend, with the highest from April to October and the lowest from November to March. In addition, the exhaust emissions presented an obvious spot-like characteristics, and the high-value areas were mainly concentrated in the surrounding suburban counties such as Shuangliu Wenjiang etc. To reduce pollution from construction machinery and improve the quality of the atmospheric environment, more effective measures on housing construction and municipal construction should be taken in those districts in Chengdu.     

基于熵权的防灾工程项目融资方式评价决策模型

对防灾工程项目融资方式的评价决策问题进行了讨论,分析了项目评价决策中的客观信息和评价决策者个人经验的主观信息,提出在量化打分的基础上整合为一个复合权重集,建立了基于熵权的防灾工程项目融资方式评价模型和方法。通过实例计算,结果表明该模型在融资方式的评价、优劣排序和选择方面具有较强的可行性和可操作性。     

特高压输变电工程环境影响评价公众参与工作程序细化研究

公众参与工作程序的合法性和有效性,直接影响特高压输变电工程环境影响评价工作质量,不仅关系到公众对环境保护的参与权、知情权和监督权,还关系到项目能否顺利取得环境行政许可.结合特高压输变电工程环境影响评价公众参与工作实际,细化环境影响评价信息第一次公告、报告书简本公示、第二次公告、征求公众意见、报告书受理公示及审批公示完成时序,规范公众参与一般工作程序及变更工作程序.     

航道疏浚工程环境影响评价技术评估研究

航道疏浚工程是指为了维护和提高航道尺度,利用挖泥船或其他机具进行航道加深或拓宽的一类工程.航道疏浚工程环境影响评价的技术评估应遵循《建设项目环境影响技术评估导则》,结合水、气、声、固废、生态等环境影响因子,从施工期角度,评估污染源强以及施工工艺和施工时序的合理性,以及工程带来的环境影响及采取的各项环保措施的可靠性、合理性.此类项目重点关注环境问题是疏浚及抛泥工程对水环境及水生生物带来的影响及防治措施.     

海南省城镇污泥处理处置对策建议

为了便于海南省实现污泥的有效处置,研究组对海南省全部污水处理厂相关运营数据进行了系统分析,基于前期资料分析、实地调查及典型污水处理厂污泥采样分析结果,本研究明确了污水收集管网覆盖面低、雨污不分流等海南省城镇污水处理厂运营现状,同时提出污泥产量低、污泥处理后部分指标不达标、现有处置方式单一、不尽合理等污泥处理处置现状及存在问题。最后,提出了加快城镇污水收集管网建设、强化污泥处理工作及加强投资与管理等建议。     

建设项目竣工环境保护验收监测报告必须阐明的内容

建设项目竣工环境保护验收监测报告是检验建设方落实环保“三同时”制度的技术手段,也是环保部门依法管理的技术支撑和依据,竣工验收监测报告除遵循行业技术规范要求外,建设内容变更、环保设施落实、污染物排放及总量、环境质量影响等成为不可或缺的重要内容,需要逐一阐述明确。     

城市建筑垃圾的资源化利用

随着建设项目的增多,建筑垃圾也日益增多。本文对建筑垃圾资源化利用进行了初步分析,重点通过对建筑垃圾的分类研究,提出我国建筑垃圾资源化存在问题及建议。     

PX项目环境风险分析

系统分析了PX项目的环境风险,结果表明:PX项目装置各单元均不是危险化工工艺单元,安全设施和污染治理水平相较于其它石油化工装置更高,但是基于装置物料的危险性和生产企业的高环境敏感度,PX项目的环境保护工作面临较大挑战。在此基础上,剖析了目前国内PX项目存在的主要环境风险问题,并提出相应的对策建议。